8-M12x50 HILTI- CONCRETE SECURING HEAVY-DUTY Expansion Anchor !NEW! QTY-8, US $29.99 – Picture 0

8-M12x50 HILTI- CONCRETE SECURING HEAVY-DUTY Expansion Anchor !NEW! QTY-8, US $29.99 – Picture 1

8-M12x50 HILTI- CONCRETE SECURING HEAVY-DUTY Expansion Anchor !NEW! QTY-8, US $29.99 – Picture 2

8-M12x50 HILTI- CONCRETE SECURING HEAVY-DUTY Expansion Anchor !NEW! QTY-8, US $29.99 – Picture 3

8-M12x50 HILTI- CONCRETE SECURING HEAVY-DUTY Expansion Anchor !NEW! QTY-8, US $29.99 – Picture 4

8-M12x50 HILTI- CONCRETE SECURING HEAVY-DUTY Expansion Anchor !NEW! QTY-8, US $29.99 – Picture 5

8-m12x50 Hilti- Concrete Securing Heavy-duty Expansion Anchor !new! Qty-8

US $29.99

Blair, Nebraska, United States
Jan 30th

Open on mobile:
QR code

HILTI HLS-3 M12/50mm EXPANSION ANCHORS UP FOR SALE THESE ARE BRAND NEW HEAVY DUTY SLEEVE EXPANSION ANCHORS I HAVE 8 BRAND NEW ANCHORS THAT TAKE A 19MM SOCKET OR WRENCH TO FASTEN AND TORQUE..... THEY TAKE AN 18MM HAMMER-DRILL BIT FOR THE HOLE. THEY ARE TYPE HLS-3 BOLT VERSION M12/50 THE END TO END LENGTH IS 156mm / 15.6cm MINIMUM EMBEDMENT IS 50mm HILTI HSL-3 CARBON STEEL HEAVY DUTY EXPANSION ANCHORS FOR CRACKED AND UNCRACKED CONCRETE 1.0 EVALUATION SCOPE Compliance with the following codes: # 2006 International Building Code® (IBC) # 2006 International Residential Code® (IRC) # 1997 Uniform Building Code™ (UBC) Property evaluated: Structural 2.0 USES The Hilti HSL-3 Heavy Duty Expansion Anchor is used to resist static, wind, and seismic tension and shear loads in cracked and uncracked normal-weight and structural sand-lightweight concrete having a specified compressive strength 2,500 psi # fNc # 8,500 psi (17.2 MPa # fNc # 58.6 MPa). The anchoring system is an alternative to cast-in-place anchors described in Sections 1911 and 1912 of the IBC and Section 1923 of the UBC. The Hilti HSL-3 Carbon Steel Heavy Duty Expansion Concrete Anchor, designated as the HSL-3, is a torque-set, sleeve-type mechanical expansion anchor. This anchor is available in carbon steel only. The material specifications are as follows: • Bolt: Carbon steel per DIN EN ISO 898-1, Grade 8.8 • Washer: Carbon steel per DIN EN 10025. • Expansion cone: Carbon steel per DIN 1654-4. • Expansion sleeve: Carbon steel , M8-M16 per DIN 10139, M20-M24 per DIN 2393-2. • Steel sleeve: Carbon steel per DIN 2393-1. • Collapsible sleeve: Acetal polyoxymethylene (POM) resin. Application of torque at the head of the anchor causes the cone to be drawn into the expansion sleeve. This in turn causes the sleeve to expand against the wall of the drilled hole. The ribs on the collapsible element prevent rotation of the sleeve and cone during application of torque. Application of the specified installation torque induces a tension force in the bolt that is equilibrated by a precompression force in the concrete acting through the component being fastened. Telescopic deformation of the collapsible element prevents buildup of precompression in the anchor sleeve in cases where the shear sleeve is in contact with the washer, and permits the closure of gaps between the work surface and the component being fastened. Application of tension loads that exceed the precompression force in the bolt will cause the cone to displace further into the expansion sleeve (follow-up expansion), generating additional expansion force. Please feel free to contact me with any questions or concerns. 402-278-2902 I guarantee your complete satisfaction and I take pride in my 100% feedback rating. I also ask if there is any concerns what so ever with your item or items, that you contact me immediately. Remember that these items are described as best possible. Customer satisfaction is my number one priority ! ! THANKS JC ! !

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Type	HEAVY DUTY SLEEVE EXPANSION ANCHOR
Thread Style	Right Hand
Head Style	8.8 hardness bolt with 19 mm hex head
Length	OVERALL LENGTH 156mm MINIMUM EMBEDMENT 50mm
Drive Style	External Hex 19MM HEX HEAD BOLT
Quantity	8
Brand	HILTI
Color	Silver
Material	Steel
Manufacturer	HILTI