8 vise for sale, brand-new and used.

KURT ANGLOCK D80 8" Vise "Made in U.S.A." Condition: GoodQu

Note: This listing is for one (1) handle only! I have for sale (6) milling machine or vise handles, approximately 8" overall length, with a 3/4" bore and slot to fit over a cross pin. Some are marked with "Fairmount", "special", or "10", and a couple have no marking at all.

NEED A SPECIFIC ITEM & YOU CAN'T FIND IT ANYWHERE, WE HAVE IT!!! CALL US @ 909.544.8882 ASK FOR BRANDON! WE SHIP GLOBALLY!

***NEW, NEVER USED*** 6" CROSS SLIDE DRILL PRESS VISE BGBV7888

I purchased these two vises and no longer have a job for them. They are brand new and have not even been out of the crate. It takes Kurt 8 weeks to produce them.

I chose "Seller Refurbished" as , being the original owner of this cross vise , I cleaned and re-greased all the slideways as it is in excellent condition ! All though made in China , this vise is very much heavy duty ; I think I used it 3 times since purchasing it brand new ! Dimensions are as follows : Base is 9 3/8" L x 5 5/8" W x 1 9/16" high , and has (3) slots per side and (1) slot at the end for convenient drill press table bolt down !

This well-made vintage vise is in good overall condition. It's teeth are slightly worn but still have grip and look to be easily removable for replacement when necessary. Handle is straight and operates smoothly.

Up for bidding is a Rigid pipe vise No. 40 A with a capacity of 1/8 in to 2 1/2 in. This item is used and in good working condition.

Toolmex Bison 8" machine vise with swivel base

RIDGID 1/8" TO 2" Bench Top Pipe Vise This classic pipe vise is relatively clean, appears to be complete and works well. This is a very functional vise and the jaws open and close as they were designed and the flip open yoke works well. PLEASE SEE PHOTOS

i

Pipe vise in great condition, works great and hardly used. TECHNICAL SPECS

Vintage Small Bench Vise / Jewelers vise 2 3/8" wide jaws, opens to 2 1/2", one weld repair done on moving jaw, solid repair, bottom of mounting flange may have been broken off. Feel free to ask any questions, look at out other items on eBay, we combine shipping.

NEW KURT Kurt D688 "D" Series Vise, 6" Size AngLock® Vise Designed for precision part clamping on basic machine tools such as knee type mills, grinders, and machine centers

AngLock® ViseDesigned for precision part clamping on basic machine tools such as knee type mills, grinders, and machine centersExtremely high accuracy where datums, flatness, and parallelism is importantAnglock® design assures the movable jaw does not liftHardened vise bed and jaw plates80,000 psi flame hardened ductile iron construction TECHNICAL SPECIFICATIONS

Mounts vertically to back of any Kurt 6" or 8" vise with an integral bracket Bracket includes a stabilzation leg For 2nd op work holding part vertically rather then horizontally Does not interfere with host vise Pull type vise

Vintage NYE Clamp-On Pipe Vise - No. 90 - USACapacity is 1/8" - 2"The vise measures 16" from top to bottom when closed.It is in good working condition.

Set of Two Pair (Medium and Large), Urethane Vise V-Blocks. PLEASE NOTE: BOTH ITEMS ARE BLACK. This listing is for two pairs of vise v blocks (medium and large).

THIS IS TWO BRASS PARTS THAT LOOK LIKE THEY MAY BE FOR A VISE BUT IF NOT THEY SURE COULD BE,THEY ARE 5" LONG, 1-1/2" HIGH, 3/4"THICK AND JUST UNDER 1/2" WHERE MACHINED,3/8 HOLES ARE 3" CENTER TO CENTER,SOLD AS IS