85.3 for sale, brand-new and used.

Nominal size before shrinking is 3/64"; after shrinking is 2/85" (measured round, not flat). This is the tiniest HST available, purchased from CableOrganizer.com a few years ago. Supposed to be abrasion-resistant and flame-retardant.

var flashVersion = window.flashVersion ? window.flashVersion : 0;if (flashVersion

var flashVersion = window.flashVersion ? window.flashVersion : 0;if (flashVersion

GE OUTDOOR THREE PHASE SAFETY SWITCH THESE ITEM IS BRAND NEW, AND IS FINAL CONFIGURED IN OUR MOTOR SHOP 3-PHASE MOTORS UP TO 7.5 HP MOST OF THE EQUIPMENT IN YOUR SHOP SHOULD HAVE A SAFETY DISCONNECT WITH TIME DELAY (SLOW BLOW) FUSES OF THE PROPER AMPERAGE INSTALLED. AN ELECTRICAL MOTOR TAKES A LOT MORE ELECTRICITY TO START THAN IT DOES TO CONTINUE OPERATING. THIS MEANS THAT A SLOW BLOW FUSE IS A GREAT WAY

100 Amp 600 volt - SQ D FUSED DISCONNECT Mfr. Model # H363 UNSPSC # 39121501 Catalog Page 311 Shipping Weight 17.85 lbs Country of Origin USA * Item Safety Switch Fusible / Nonfusible Fusible Use Class H, J, R, T Fuse Duty Heavy Amps 100 Voltage 600VAC Phase 3 HP 60 HP @ 600VAC NEMA Enclosure Type 1 IP Rating 20 Material of Construction Steel Number of Wires 3 Number of Poles 3 Contact Form 3PST Height 21.2" Width 8.5" Depth 6.4" Standards UL Listed Neutral Assembly None Fuse Kit (Class R) Mfr.

THN 3363 - General Electric Safety Switch ( This item is in excellent working condition) • Authentic General Electric Product • Heavy Duty Safety • 240/480/600 V Ac Voltage • 250 V Dc Voltage • 100 Ampere • Power Rating 20 Hp At 240 Vac 1 Phase, 40 Hp At 240 Vac 3 Phase (Nec Standard) • 75 Hp At 480 Vac 3 Phase, 100 Hp At 600 Vac 3 Phase (Time Delay Fuse) • 20 Hp At 250 Vdc • 3 Pole • 3 Wire

THN 3362 - General Electric Safety Switch ( This item is NEW SURPLUS in excellent working condition) • Authentic General Electric Product • Heavy Duty Safety • 240/480/600 V Ac Voltage • 125/250 V Dc Voltage • 60 Ampere • Power Rating 10 Hp At 240 Vac 1 Phase, 20 Hp At 240 Vac 3 Phase (Nec Standard) • 50 Hp At 480 Vac 3 Phase, 60 Hp At 600 Vac 3 Phase (Time Delay Fuse) • 5 Hp At 125 Vdc, 10 Hp At 250 Vdc • 3 Pole • 3 Wire • Non Fusible Fuse • Switching Neutral

THIS ITEM IS NEW SURPLUS WITH SOME SURFACE SCRATCHES Current Rating : 100 AMPERE Number Of Poles : 2 Number of Wires : 3 Type : GENERAL DUTY SAFETY SWITCH

Actuator Side Rotary Ampere Rating 15 A Ind./ 0.5 A Res./0.25 A Res. Approvals UL listed, CSA Certified Circuitry 1NC 1NO SPDT Snap Action; Maintained; 4 Basic Switches CSA File # LR57324 Differential Travel (D.T.) 10° max. Housing Material Aluminum Housing Type CX: Standard: 145 mm [5.71 in] Lever Style Lever Not Included - Reference Lever Required Accessory Operating Force (O.F.) 0.50 Nm [.369 lb ft] max.

Item Description: Size: 27.8x10.3x15.9mm Roller Diameter: 4.75mm Lever Length: 28mm Rating: 15A AC250V Withstand Voltage: AC1,0000V 1 Minute Insulation Resistance: 100M O DC500V Contact Resistance: <100mO Soldering Temperature: 250°C Max 3 sec. Ambient Temperature used: -25°C to +80°C Ambient Humidity Used: <85% RH Mechanical Life: 5,000,000 cycles Electrical Life: 100,000 cycles Operating Forc

Contact us Returns Payment Shipping Abaout us

BRAND NEW GENUINE OMRON SWITCH CSA APPROVED V-152-1C25 SWITCH IS SHORT ARM HINGE LEVER TYPE SPDT. SNAP ACTION MOMENTARY. CAN BE USED FOR NORMALLY OPEN OR NORMALLY CLOSED CIRCUITS.

BRAND NEW GENUINE OMRON SWITCH CSA APPROVED V-153-1C25 SWITCH IS LONG ARM HINGE LEVER TYPE SPDT. SNAP ACTION MOMENTARY. CAN BE USED FOR NORMALLY OPEN OR NORMALLY CLOSED CIRCUITS.