acme nuts for sale, brand-new and used.

Single piece of 5/8-8, ACME, coupling nut. Right hand thread, low carbon steel, single start. 7/8 hex flats x 2.125 inch long.

4 pack, 5/8-8, ACME, coupling nut. Right hand thread, low carbon steel, single start. 7/8 hex flats x 2.125 inch long.

single piece of 1/2-10, ACME, coupling nut. Right hand thread, low carbon steel, single start. 5/8 hex flats x 1.25 inch long.

4 pack, 1/2-10, ACME, coupling nut. Right hand thread, low carbon steel, single start. 5/8 hex flats x 1.25 inch long.

Magnetic Pick-Up Tool Attachment, 3.20" Diameter, 0.440" Thick Magnet Assembly with Acme-Threaded Attachment for Standard Broom Handle, 65 Pounds Pull, 1 each

Item ........................ Acme threaded hex nut for a Buffing Jack machine spindle Manufacturer ........ Unknown Size .........................

Listing for 12 each v-groove bearing and 12 each fixed bushing A) V-groove bearing used to make CNC routers. Package of 12 pcs, 4 for each axis. Made from bearing alloy steel ( not stainless ).

Extremely Low $10.00 Opening Bid! I am Moving and Downsizing ~ My Loss is Your Gain! Old Vintage 40s-50s

FREE SHIPPING IN US! New Half Nuts / Split Nut for Craftsman and Atlas 6" Lathe. ACME 1/2"x 16 Right Hand Threads.

Ident Brand Description Length Used in: 304008-2 Made in USA 3/8-12 precision Acme leadscrew Single Start Low Carbon Steel Oil Finish, Right hand 2 foot CNC machine axis drives, 3D printer

304040 - Shaft Clamp ( Threaded Collar), One piece, split, 1/2-10 acme right hand thread, five start, Black Delrin, with stainless steel hardware. Note: These Shaft clamps will not work with Single start threaded rod. This item is used to pre-load thrust bearings on CNC machines.

304036 - Shaft Clamp ( Threaded Collar), One piece, split, 1/2-10 acme right hand thread, single start, Black Delrin, with stainless steel hardware. This item is used to pre-load thrust bearings on CNC machines. The preload eliminates axis drift caused by changes of direction.

Supco SM672 Utility Motor Kit for 240 volts AC. Single speed 3000 RPM CW (clockwise) or CCW (counter-clockwise) with two fan blades and an assortment of screws, nuts and a mounting bracket. For 50 Hz 0.55 amps or 60 Hz 0.32 amps.

NEW Milling Machine Screws Sets. Also have all kinds of New parts for Knee Mills All split nuts are = 1.55" in diameter 1.385" in length / each screw come with 2 nuts- split for backlash adjustment. x-axis - Right hand acme tread y-axis - Left hand tread All screws are 1.260" in diameter For table ranges = 42" to 50" Large table: X -64.25" in length / Y-axis - 30.75" in length Small table X -52" in length / Y-axis - 23.50" in length W

CONDITION:Used, though in great shape. No visible damage or bad wear.

Title of your page goes here 1941 MACHINE SHOP TOOLS LATHE MILL JIGS FIXTURES FOUNDRY GEAR CUTTING      This is a 568 page, 5 3/4” x 8 1/2”, hardcover book titled The New Encyclopedia of Machine Shop Practice.   The book was edited by George W. Barnwell Professor of Production Practice Stevens Institute of Technology and was copyrighted and published in 1941.

3 Shaft Couplers: Size C 1/2"-8 2 Start to .25" bore1 Shaft Coupler: Size C ACME 1/2"-8 2 start3 Anti-backlash nuts6 nuts All brand new. Originally purchased from Dumpster CNC but never installed.

Huge lot #1 of good parts for 26d type heads. Lock Levers Knives Driver Bars Clinchers Grippers Clincher Parts Swivel Cam Swivel Lever Face Plates Clincher Nuts Springs Face Plate Clamps Screws Gripper Hold Down Many Misc. parts Please ask any questions you may have.

This lot consists of 95+ items weighing approximately 191 pounds: This is a lot of value to concrete contractors, we will provide shipping quotes by UPS when requested with zip code. 35 tie bars 3/4 inch diameter by approximately 20 inches long. The smooth end of the tie bar is approximately 8 1/2 inches.