Acterna TB / MTS-8000 2.5G Optical Ethernet Transport Module T-BERD / MTS 8000, US $1,695.00 – Picture 0

Acterna TB / MTS-8000 2.5G Optical Ethernet Transport Module T-BERD / MTS 8000, US $1,695.00 – Picture 1

Acterna TB / MTS-8000 2.5G Optical Ethernet Transport Module T-BERD / MTS 8000, US $1,695.00 – Picture 2

Acterna Tb / Mts-8000 2.5g Optical Ethernet Transport Module T-berd / Mts 8000

US $1,695.00

Toledo, Ohio, United States
Jan 29th

Open on mobile:
QR code

Content on this page requires a newer version of Adobe Flash Player. The Following Items Are Included: Acterna TB/MTS-8000 Transport Module (BC# 13988) w/ Options: 10ME/100ME Electrical 155M Electrical 155M Optical 1GigE Electrical 2.5G Optical 51M Electrical 622M Optical DS1 DS3 E1 E3 E4 Ethernet L2 Ethernet L3 SDH Sonet BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! Acterna TB/MTS-8000 Transport Module This Sale Is For The TB/MTS-8000 Optical Ethernet Transport Module Only! Mainframe is NOT Included! Transport Module Options: - 10ME/100ME Electrical - 155M Electrical - 155M Optical - 1GigE Electrical - 2.5G Optical - 51M Electrical - 622M Optical - DS1 - DS3 - E1 - E3 - E4 - Ethernet L2 - Ethernet L3 - SDH - Sonet The TB/MTS 8000 features a full dual-port capability for 10/100/1000 copper and optical GigE interfaces! Working Condition: Excellent Condition: Refurbished Warranty: 90 Day Exchange Warranty T-BERD/MTS 8000 (TB/MTS 8000) Transport module As service providers expand their offerings into new data and wavelength services, test requirements are also expanding beyond traditional SONET and T-Carrier technologies into Data and Optical layer technologies. Service providers are now responsible for installing and maintaining new network elements and service types that were not present in legacy networks. The T-BERD/MTS 8000 (TB/MTS 8000) Transport module addresses these trends by providing the necessary test functionality to support all of these services in one integrated module. Weighing less than 15 pounds and operating on battery power for up to two hours at 10 Gb/s line rates, the TB/MTS 8000 is conveniently sized and designed for field test applications. The TB/MTS 8000 Transport module’s Ethernet configuration allows for Ethernet and IP test capabilities from all Ethernet interfaces – 10/100/1000 copper, optical Gigabit Ethernet (GigE), and 10GigE LAN-Phy and WAN-Phy. Key test applications of the TB/MTS 8000 include connectivity, throughput, and quality of service (QoS) testing for emerging IP networks. The TB/MTS 8000 also provides RFC 2544 testing for verification of Ethernet and IP conformance to service level agreements (SLAs). The TB/MTS 8000 features a full dual-port capability for 10/100/1000 copper and optical GigE interfaces – with two transmitters (TX) and two receivers (RX) – allowing for the simultaneous testing of two Ethernet/VLAN or IP circuits. These circuits may be provisioned for two fully independent customers, or they may represent two routes in a single network. The dual-port capability of the TB/MTS 8000 Transport module enables field technicians to perform three important types of testing during turn-up and first-line of maintenance: – Simultaneous Circuit Testing: Testing of two independent circuits concurrently – Network Element Wrap Testing: Testing an element from the client to the network side – In-Service Troubleshooting: Monitoring from two different directions on the circuit Dual-Port Test Applications Simultaneous Circuit Testing Each of the TB/MTS 8000 Transport module’s two Ethernet ports has its own transmitter and receiver, both of which are able to connect to the customer's switch or router. This enables field technicians to test separate Ethernet/VLAN or IP connections through the network. In a multi-site network, technicians can use the TB/MTS 8000 to test two routes independently of one another. If the service is straightforward Ethernet transport, meaning no switching occurs, the traffic can be returned to the origination point by a simple hard loop at the far-end destination point. If the traffic is switched at the MAC (layer 2) or IP (layer 3) layers, then another TB/MTS 8000 test instrument is required to perform the loop at the far end. In the loopback testing scenario, the TB/MTS 8000 takes the source and destination MAC or IP addresses of the transmitting Ethernet frame or IP packet and swaps them, thereby ensuring that the originating traffic travels properly through the network back to its origination point. In addition to testing the connectivity of each route, the TB/MTS 8000 enables technicians to test the performance of specific class of service (CoS) applications, using VLAN-based or TOS/DSCP-based traffic prioritization schemes. Testing Parallel Virtual Connections Simultaneously The TB/MTS 8000 Transport module also enables technicians to test two routes between the same origination point and the same termination point. If a customer is experiencing different delays on two parallel routes, the TB/MTS 8000 can be used to establish two VLAN or IP connections, with different tags and user priorities on each port, to a remote site. This test setup allows for verification of the round trip delay (RTD) on each path independently to determine if the delay is the same on both routes, and to verify/compare the delay on the two different routes. Testing Two Independent Routes Simultaneously When installing service to two separate customers, service providers only need one dual-port TB/MTS 8000 Transport module to perform installation testing. The TB/MTS 8000 emulates the customer's switch/router, sends IEEE-complaint Ethernet traffic, and performs RFC 2544 tests for both end customers. This allows the service provider to consistently and repeatedly test the Ethernet traffic at every route and to save time by turning-up two customer circuits simultaneously Network Element Wrap Testing The TB/MTS 8000 Transport module also supports network element wrap testing. This enables technicians to pre-qualify a switch or router before bringing it into service. Full Gigabit Ethernet (1 GigE) throughput testing can be accomplished by connecting a single TB/MTS 8000 to two separate ports on both sides of the network element – client side and network side. In addition, sub-rate line cards can be verified at different rates other than the network rate. For example, technicians can connect one TB/MTS 8000 port to the 10/100 Mb/s client card and the other TB/MTS 8000 port to the 1 GigE (1000 Mb/s) network card and perform throughput testing through the network element. This ensures that the network element backplane can sufficiently buffer and pass incoming traffic, without dropping any frames/packets. The TB/MTS 8000 can perform RFC 2544 testing to verify the configuration of the network element and the throughput of its line cards, as well as ensure consistent backplane functionality in both directions. With this developing market trend, the TB/MTS 8000 Transport module is well-suited to enable technicians to use one test set to turn up services ranging from 10/100/1000 copper Ethernet, optical GigE, and optical 10 GigE – all from a single module. In addition, with its dual-port configuration, the TB/MTS 8000 provides a comprehensive and robust turn-up tool, thereby minimizing follow-on installation and maintenance issues. Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! Contact: Test Equipment Store eBay Sales Phone: 1-419-517-6681 Toll Free : 1-800-548-2381 We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate". Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information. We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. UPS Ground United States USD 0.00 USPS Express Mail International (EMS) Worldwide USD 0.00 We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Reach your goals with Kyozou eBay Sales Management

Condition:	Seller refurbished: An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details. ...	Manufacturer	JDS
MPN	TB/MTS-8000
Model	T-BERD/MTS 8000