Addicore SMD nRF24L01+ Wireless Transceiver Module with Castellations, US $2.40 – Picture 0

Addicore SMD nRF24L01+ Wireless Transceiver Module with Castellations, US $2.40 – Picture 1

Addicore SMD nRF24L01+ Wireless Transceiver Module with Castellations, US $2.40 – Picture 2

Addicore SMD nRF24L01+ Wireless Transceiver Module with Castellations, US $2.40 – Picture 3

Addicore Smd Nrf24l01+ Wireless Transceiver Module With Castellations

US $2.40

Provo, Utah, United States
Jun 9th

Open on mobile:
QR code

This is an SMD version of the nRF24L01+ module. It has 0.05" pitch (1.27mm) pitch castellated mounting holes (also known as castellated vias or castellations), so it can be soldered to a PCB (board-to-board solder mounted). Please note that 0.05" pitch is not the standard 0.1" pitch of breadboards and many header pins. Product Contents: 1 piece - SMD nRF24L01+ Module Specifications: The Addicore nRF24L01+ is a 2.4GHz ISM band transceiver. Includes on board support components and a 2.4GHz antenna for easy implementation into designs without additional hardware. Communication range up to 262 feet (80 meters) in ideal conditions. A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps). The on-chip voltage regulator accepts supply voltages from 1.9 to 3.6V. When using the nRF24L01+ with an Arduino be sure to use the 3.3V output pin from the Arduino board to power the nRF24L01+ module. The module has 5V tolerant inputs which allows for direct connection of SPI pins to an Arduino or other 5V device. Ultra low power consumption as low as 11.3mA transmitting, 13.5mA receiving at 2Mbps, 900nA in power down, and 26uA in standby. Internal filtering results in high margins of meeting RF regulatory standards. The module's radio uses Gaussian Frequency-Shift Keying (GFSK) modulation as well as fast Automatic Gain Control (AGC). The module includes an Interrupt Request (IRQ) pin which can be used to wake the host microcontroller, (ex: Arduino), from sleep when the module receives a transmission providing great power conservation in battery devices. Auto-acknowledge and auto-retransmit Pitch of Castellations: 1.27mm (0.05") Dimensions: 18mm (0.7") length x 12.5mm (0.5") width x 1.9mm (0.07") height Weight: 0.56g (0.02oz) Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Addicore
MPN	NRF24L01+