Agilent Hp 8620c Sweep Oscillator Mainframe Khdg

US $7700

Redwood City, California, United States
May 24th

Open on mobile:
QR code

Test Equipment Solutions Today accepts PayPal, Cashiers Check, and Wire Transfer for payment. Payment shall be in advance of shipment, and all international customers require a wire transfer of funds. Shipment of the product will be done by means specified by the customer and at the customer's expense, in accordance with Test Equipment Solutions Today's standard shipping and handling charges. They ship Federal Express and UPS ONLY. Shipping cost is the buyer's responsibility unless otherwise stated in the description. If the buyer is not completely satisfied with their purchase, Test Equipment Solutions Today will gladly assist with the return process. Buyers must follow the guidelines detailed on their website to return their purchase. Test Equipment Solutions Today's goal is for customers to be completely satisfied with their purchase. The unit can offer frequency from 3 MHz to 18.6 GHz based on RF Plug-Ins. Its sweep functions include Start-Stop, Delta, CW, Remote Programmed. The sweep modes are auto, line, and external with sweep time at 10 msec to 100 sec. The sweep output is direct coupled with 0 to 10 V. It has internal AM 1 kHz modulation and external FM modulation based on RF unit. The Agilent HP 8620C sweep oscillator mainframe is available for purchase AS-IS with no warranty. It comes without manuals or accessories unless shown in the picture. The unit can provide leveled output power of >10 mW from 3 to 18.6 GHz with the use of more than 15 solid-state plug-ins that are sold separately. The plug-in sweep bandwidths range from 3 to 350 MHz to the wide band 2 to 18.6 GHz module. Four separate bands and their respective frequency scales can be selected when appropriate plug-ins are used. The start-stop sweep points may be set up or down scale, from 1% to 100% of the band, with sweep rates from 10 msec to 100 sec per sweep. DeltaF sweeps can also be made at the same rates from 1% or 10% of the band. The sweeper can be used as a signal generator with its continuous wave (CW) feature and can be modulated. Other sweep modes include automatic, manual, externally triggered, single sweep, and remotely programmed. A marker, selected by the CW/Marker control, may be adjusted to any point on the band and displayed by either amplitude or intensity. Test Equipment Solutions Today aims to meet the quality standards established by