+ Post new Ad
#AH-320H COSEN 12.6" x 12.6" Horizontal Band Saw w/ Hyd Shuttle Feed (New 2008), US $14,500.00 – Picture 0
#AH-320H COSEN 12.6" x 12.6" Horizontal Band Saw w/ Hyd Shuttle Feed (New 2008), US $14,500.00 – Picture 0

#ah-320h Cosen 12.6" X 12.6" Horizontal Band Saw W/ Hyd Shuttle Feed (new 2008)

US $14,500.00

  • Hauppauge, New York, United States
  • Jan 30th
Open on mobile:
QR code
Model: AH-320H, 12.6" x 12.6" COSEN Horizontal Band Saw, S/N:H971716 (New 2008) Specifications: Maximum capacity: round square rectangle Blade size Blade speeds Automatic feed length, single stroke Automatic feed length, multiple stroke Height of work bed   12.6" 12.6" x 12.6" 14" x 12.6" 144" long x 1.3" wide x .042" thick 49-328 F.P.M. 15.7" 141.7" 25.6" Equipped With: Dual-column design Automatic hydraulic downfeed of cutting assembly with downfeed rate and cutting       pressure control dials (dual valves) Hydraulically actuated shuttle feed Hydraulically actuated cylinders for both front and rear vises Split front vise for work holding on both sides of the saw blade Cutting piece counter used to designate the number of cuts required in automatic mode-      when the counter reaches the preset number the saw stops automatically Feeding time selector switch - numbered from 1 to 9 cycles Cutting length preset device: used to determine the required cutting length for automatic      cutting Selector switch for Auto/Manual mode of operation PLC controlled multiple indexing Hydraulically actuated blade tension and clamping with automatic blade breakage       detector (limit switch) and machine shut-off if blade is broken during operation Hydraulically actuated chip conveyor Power driven steel wire blade brush with flexible drive shaft Interchangeable carbide blade guide Work light Coolant system with 1/8 H.P. coolant pump motor Hydraulic system with 1 H.P. hydraulic pump motor 5.5 H.P. blade drive motor with AC inverter drive Machine is wired for 230 volt operation (low voltage only). Approximate Weight: 2,645 Lbs. Approximate Dimensions: 92" L-R x 81" F-B x 67" H Location: F.O.B. Truck, Hauppauge - Long Island, NY Reference #: SAF_GM3110
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand COSEN
Model AH-320H

Directions

Similar products from Tools for Saws & Cutting Machines

20" DOALL Model 2013-V Vertical Band Saw, New 1999.

20" DOALL Model 2013-V Vertical Band Saw, New 1999.

  • Dayton, Ohio, United States
  • Jan 30th
2 Arbor Shop Press Plate X-BARS + Two 4"X8" Bed Bars, 4 PC Set, 20 Ton, GROUND

2 Arbor Shop Press Plate X-BARS + Two 4"X8" Bed Bars, 4 PC Set, 20 Ton, GROUND

  • Victor, New York, United States
  • Jan 30th
20" RDN Cross Cut Saw, Model C-420A

20" RDN Cross Cut Saw, Model C-420A

  • Elk Grove Village, Illinois, United States
  • Jan 30th
MACHINIST LATHE MILL Famco 1 Arbor Press

MACHINIST LATHE MILL Famco 1 Arbor Press

  • Morris Plains, New Jersey, United States
  • Jan 30th
Ted Machines Automatic Vertical Tilt Frame Band Saw 17"x20" Miter Bandsaw

Ted Machines Automatic Vertical Tilt Frame Band Saw 17"x20" Miter Bandsaw

  • Des Plaines, Illinois, United States
  • Jan 30th
Dake VH-24 Bandsaw Variable speed Hydraulic table for metal or wood

Dake VH-24 Bandsaw Variable speed Hydraulic table for metal or wood

  • Gresham, Oregon, United States
  • Jan 30th
DoAll 1612-0 Band Saw w/ DoAll Blade Welder DBW-12B

DoAll 1612-0 Band Saw w/ DoAll Blade Welder DBW-12B

  • Brownsville, Texas, United States
  • Jan 30th
9 x 32 BRIDGEPORT VERTICAL MILL 1/2 HP WITH M HEAD, VISE, POWER FEED - 3 PHASE

9 x 32 BRIDGEPORT VERTICAL MILL 1/2 HP WITH M HEAD, VISE, POWER FEED - 3 PHASE

  • Pinellas Park, Florida, United States
  • Jan 30th
GROB Vertical Bend Saw For Metal Cutting

GROB Vertical Bend Saw For Metal Cutting

  • Elk Grove Village, Illinois, United States
  • Jan 30th
DoAll 916 bandsaw, needs work, rebuildable

DoAll 916 bandsaw, needs work, rebuildable

  • Blandon, Pennsylvania, United States
  • Jan 30th
#H300A STARTRITE 9" x 13.75" Horizontal Band Saw w Automatic Bar Feed (New 1985)

#H300A STARTRITE 9" x 13.75" Horizontal Band Saw w Automatic Bar Feed (New 1985)

  • Hauppauge, New York, United States
  • Jan 30th
Bolton Tools Band Saw 5 x 6 Metal Cutting Horizontal Band Saw

Bolton Tools Band Saw 5 x 6 Metal Cutting Horizontal Band Saw

  • Rowland Heights, California, United States
  • Jan 30th
Bolton Tools Metal Cutting Slow Speed 14" Cold Cut Saw Swivel Base Cold Saw

Bolton Tools Metal Cutting Slow Speed 14" Cold Cut Saw Swivel Base Cold Saw

  • United States
  • Jan 30th
ROCKWELL Jig BAYONET SAWS MANUAL & GUIDE c/w ORIGINAL ENVELOPE #RR34

ROCKWELL Jig BAYONET SAWS MANUAL & GUIDE c/w ORIGINAL ENVELOPE #RR34

  • Perth, Ontario, Canada
  • Jan 30th
Bolton Tools 11" Slow Speed Metal Cutting Cold Saw With Swivel Base

Bolton Tools 11" Slow Speed Metal Cutting Cold Saw With Swivel Base

  • Rowland Heights, California, United States
  • Jan 30th
Carolina Industrial Horizontal band saw HD10

Carolina Industrial Horizontal band saw HD10

  • Center, Colorado, United States
  • Jan 30th
Band saw wheel 1-1/2" Bore 11-1/2" OD 1" wide 3/4" wide Blade track cast Iron

Band saw wheel 1-1/2" Bore 11-1/2" OD 1" wide 3/4" wide Blade track cast Iron

  • Middlebury, Indiana, United States
  • Jan 30th
Hydmech VW-18 with optional extra vise.

Hydmech VW-18 with optional extra vise.

  • Spokane, Washington, United States
  • Jan 30th
Hydmech S-20A

Hydmech S-20A

  • Spokane, Washington, United States
  • Jan 30th
GROB INC 18" VERTICAL BAND SAW W BLADE WELDER & LIGHTS MODEL NS18 - 2030 FPM

GROB INC 18" VERTICAL BAND SAW W BLADE WELDER & LIGHTS MODEL NS18 - 2030 FPM

  • Rochester, New York, United States
  • Jan 30th

People who viewed this item also vieved

ISCAR Cut-Off Blade Tool Block SGTBN 20-5 ( 10 pcs inserts) , Blade SGIH 26-3

ISCAR Cut-Off Blade Tool Block SGTBN 20-5 ( 10 pcs inserts) , Blade SGIH 26-3

  • Ancona, Italy
  • Jun 1st
CARBOLOY LATHE TOOL HOLDER CTGPR-16-4D STK8566

CARBOLOY LATHE TOOL HOLDER CTGPR-16-4D STK8566

  • Wadley, Alabama, United States
  • Jun 1st
SANDVIK T-MAX MCFNR 20 4D TOOLHOLDER + 20 ISCAR CNMG 432 IC656 CARBIDE INSERTS

SANDVIK T-MAX MCFNR 20 4D TOOLHOLDER + 20 ISCAR CNMG 432 IC656 CARBIDE INSERTS

  • Ontario, Canada
  • Jun 1st
Command ER 20 Collet Extension 1" Shank 6.5" OAL DRCE 0020 (LOC1358B)

Command ER 20 Collet Extension 1" Shank 6.5" OAL DRCE 0020 (LOC1358B)

  • Laingsburg, Michigan, United States
  • Jun 1st
MULTI TOOL CUTTER HOLDER FOR MILLING MACHINE HOLDS UP TO 6 CUTTERS

MULTI TOOL CUTTER HOLDER FOR MILLING MACHINE HOLDS UP TO 6 CUTTERS

  • Walcott, Iowa, United States
  • Jun 1st
Straight-tooth milling cutter 4.738x.12", 1" Hole 40tooth

Straight-tooth milling cutter 4.738x.12", 1" Hole 40tooth

  • Salt Lake City, Utah, United States
  • Jun 1st
CHARMILLES D10 Sinker Type EDM w/ System 3R Holder & ISOPULSE P25 Power Supply

CHARMILLES D10 Sinker Type EDM w/ System 3R Holder & ISOPULSE P25 Power Supply

  • Chatsworth, California, United States
  • Jun 2nd
System 3R 3R-321.2-4x90 Manual Lathe Chuck Mounted FM42

System 3R 3R-321.2-4x90 Manual Lathe Chuck Mounted FM42

  • Bloomfield, Connecticut, United States
  • Jun 2nd
2x NOS soviet GRAPHITE, CARBON rod, electrode (18mm x 255mm)! or MORE!

2x NOS soviet GRAPHITE, CARBON rod, electrode (18mm x 255mm)! or MORE!

  • Dnepropetrovsk, default, Ukraine
  • Jun 2nd
3 KETT TOOLS SPINDLE CHUCK WRENCH BIT SAW DRILL POWER TOOL MILITARY SURPLUS USED

3 KETT TOOLS SPINDLE CHUCK WRENCH BIT SAW DRILL POWER TOOL MILITARY SURPLUS USED

  • Westerville, Ohio, United States
  • Jun 3rd
VINTAGE GENERAL NO. 150 FLARING TOOL WITH SCREW YOKE

VINTAGE GENERAL NO. 150 FLARING TOOL WITH SCREW YOKE

  • Lockport, New York, United States
  • Jun 3rd
Tapco Tune Up Kit For Windy SP Port-O-Brake - 10820

Tapco Tune Up Kit For Windy SP Port-O-Brake - 10820

  • Glen Ellyn, Illinois, United States
  • Jun 3rd
Starrett No.93C T-Handle Tap Wrench

Starrett No.93C T-Handle Tap Wrench

  • Chalfont, Pennsylvania, United States
  • Jun 4th
GLASS CUTTER FLETCHER group USA FLETCHER #01 + FLETCHER #02 GREEN METAL

GLASS CUTTER FLETCHER group USA FLETCHER #01 + FLETCHER #02 GREEN METAL

  • Staten Island, New York, United States
  • Jun 4th
Dumore 10-011 Electric Die - Hand - Grinder - 1/8" Collet USA MADE!!!

Dumore 10-011 Electric Die - Hand - Grinder - 1/8" Collet USA MADE!!!

  • Prescott Valley, Arizona, United States
  • Jun 4th
THE DRILLING MACHINE Book by Bradley 1973 #RB233 Machinists Model Engineers

THE DRILLING MACHINE Book by Bradley 1973 #RB233 Machinists Model Engineers

  • Perth, Ontario, Canada
  • Jun 4th
Telco Tapping head series 3-375 Jarvis 46500

Telco Tapping head series 3-375 Jarvis 46500

  • Albemarle, North Carolina, United States
  • Jun 5th
PROCUNIER TAPPING HEAD SERIES 12000 MODEL 2E No. 2MT SHANK

PROCUNIER TAPPING HEAD SERIES 12000 MODEL 2E No. 2MT SHANK

  • Louisville, Kentucky, United States
  • Jun 5th
Amada NCT STD D2 C OB .190 x 2.000

Amada NCT STD D2 C OB .190 x 2.000

  • Georgetown, Texas, United States
  • Jun 6th
Amada .562 x 1.250 tooling

Amada .562 x 1.250 tooling

  • Georgetown, Texas, United States
  • Jun 6th
Amada .510x 1.250 tooling

Amada .510x 1.250 tooling

  • Georgetown, Texas, United States
  • Jun 6th
Carbide Burr (SM-1) Coarse Cut Cone - 1/4 x 1/2 x 1/4 x 2

Carbide Burr (SM-1) Coarse Cut Cone - 1/4 x 1/2 x 1/4 x 2

  • Johnson City, New York, United States
  • Jun 7th
Carbide Burr (SF-42) -Ball Nose - Single Cut - 1/8 x 1/2 x 1/8 x 1 1/2

Carbide Burr (SF-42) -Ball Nose - Single Cut - 1/8 x 1/2 x 1/8 x 1 1/2

  • Johnson City, New York, United States
  • Jun 7th
Carbide Burr (SA-1) Cylindrical - Double Cut - 1/4 x 5/8 x 1/4 x 2

Carbide Burr (SA-1) Cylindrical - Double Cut - 1/4 x 5/8 x 1/4 x 2

  • Johnson City, New York, United States
  • Jun 7th
Brown & Sharpe Screw Machine Turret Lathe No. 711-62-122 Slide Tool 1" Shank

Brown & Sharpe Screw Machine Turret Lathe No. 711-62-122 Slide Tool 1" Shank

  • Flint, Michigan, United States
  • Jun 9th
Brown & Sharpe Screw Machine Turret Lathe No. 105-312 Adjustable tap Holder Rele

Brown & Sharpe Screw Machine Turret Lathe No. 105-312 Adjustable tap Holder Rele

  • Flint, Michigan, United States
  • Jun 9th
Brown & Sharpe Screw Machine Turret Lathe No. 65 Adjustable Tool Holder 65-122

Brown & Sharpe Screw Machine Turret Lathe No. 65 Adjustable Tool Holder 65-122

  • Flint, Michigan, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies