+ Post new Ad
#H300A STARTRITE 9" x 13.75" Horizontal Band Saw w Automatic Bar Feed (New 1985), US $6,950.00 – Picture 0
#H300A STARTRITE 9" x 13.75" Horizontal Band Saw w Automatic Bar Feed (New 1985), US $6,950.00 – Picture 0

#h300a Startrite 9" X 13.75" Horizontal Band Saw W Automatic Bar Feed (new 1985)

US $6,950.00

  • Hauppauge, New York, United States
  • Jan 30th
Open on mobile:
QR code
Model: H300A STARTRITE, 9" x 13.75" Horizontal Band Saw w Automatic Bar Feed, S/N: 3.6017 (New 1985) Specifications: Cutting capacity at 90 degrees, rectanges squares rounds Blade size Blade speeds, infinitely variable Bed height Bandwheel diameter Maximum stock feed in one setting Maximum automatic cutting length   9" x 13-3/4" 11" 13" 1.25" wide x .042" thick x 150" long 60-400 F.P.M. 25.5" 16.5" 24" 48" Equipped With: Semi or fully automatic cutting cycle with selector switch Hydraulically actuated automatic bar feed Hydraulically actuated feed of cutting head assembly  Adjustable cutting and feed pressure  Multiple feed selector switch which allows feeding material up to 2 times before cutting,       for automatic cutting lengths up to 48" Mechanical piece counter for pre-setting desired number of cuts in automatic mode.      Machine stops after pre-set number of cuts is reached. Manual length adjustment handwheel with mechanical readout graduated in inches Dual manually adjustable vises with self-clamping jaws in automatic mode 24" Long infeed roller stock table Manually operated band tension control Chip conveyor Coolant system with pump and tank Self-contained hydraulic pump and tank 3 H.P. 3/60/230-460 volt blade drive motor Machine is wired for 208 volt operation. Approximate Weight: 3,100 Lbs. Approximate Dimensions: 72" L-R x 73" F-B x 50" H Location: F.O.B. Truck, Hauppauge - Long Island, NY - (We Ship Worldwide) Reference #: SAF_GM3058
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand STARTRITE
Model H300A

Directions

Similar products from Tools for Saws & Cutting Machines

2 Arbor Shop Press Plate X-BARS + Two 4"X8" Bed Bars, 4 PC Set, 20 Ton, GROUND

2 Arbor Shop Press Plate X-BARS + Two 4"X8" Bed Bars, 4 PC Set, 20 Ton, GROUND

  • Victor, New York, United States
  • Jan 30th
20" RDN Cross Cut Saw, Model C-420A

20" RDN Cross Cut Saw, Model C-420A

  • Elk Grove Village, Illinois, United States
  • Jan 30th
MACHINIST LATHE MILL Famco 1 Arbor Press

MACHINIST LATHE MILL Famco 1 Arbor Press

  • Morris Plains, New Jersey, United States
  • Jan 30th
Ted Machines Automatic Vertical Tilt Frame Band Saw 17"x20" Miter Bandsaw

Ted Machines Automatic Vertical Tilt Frame Band Saw 17"x20" Miter Bandsaw

  • Des Plaines, Illinois, United States
  • Jan 30th
Dake VH-24 Bandsaw Variable speed Hydraulic table for metal or wood

Dake VH-24 Bandsaw Variable speed Hydraulic table for metal or wood

  • Gresham, Oregon, United States
  • Jan 30th
DoAll 1612-0 Band Saw w/ DoAll Blade Welder DBW-12B

DoAll 1612-0 Band Saw w/ DoAll Blade Welder DBW-12B

  • Brownsville, Texas, United States
  • Jan 30th
9 x 32 BRIDGEPORT VERTICAL MILL 1/2 HP WITH M HEAD, VISE, POWER FEED - 3 PHASE

9 x 32 BRIDGEPORT VERTICAL MILL 1/2 HP WITH M HEAD, VISE, POWER FEED - 3 PHASE

  • Pinellas Park, Florida, United States
  • Jan 30th
GROB Vertical Bend Saw For Metal Cutting

GROB Vertical Bend Saw For Metal Cutting

  • Elk Grove Village, Illinois, United States
  • Jan 30th
DoAll 916 bandsaw, needs work, rebuildable

DoAll 916 bandsaw, needs work, rebuildable

  • Blandon, Pennsylvania, United States
  • Jan 30th
#AH-320H COSEN 12.6" x 12.6" Horizontal Band Saw w/ Hyd Shuttle Feed (New 2008)

#AH-320H COSEN 12.6" x 12.6" Horizontal Band Saw w/ Hyd Shuttle Feed (New 2008)

  • Hauppauge, New York, United States
  • Jan 30th
Bolton Tools Band Saw 5 x 6 Metal Cutting Horizontal Band Saw

Bolton Tools Band Saw 5 x 6 Metal Cutting Horizontal Band Saw

  • Rowland Heights, California, United States
  • Jan 30th
Bolton Tools Metal Cutting Slow Speed 14" Cold Cut Saw Swivel Base Cold Saw

Bolton Tools Metal Cutting Slow Speed 14" Cold Cut Saw Swivel Base Cold Saw

  • United States
  • Jan 30th
ROCKWELL Jig BAYONET SAWS MANUAL & GUIDE c/w ORIGINAL ENVELOPE #RR34

ROCKWELL Jig BAYONET SAWS MANUAL & GUIDE c/w ORIGINAL ENVELOPE #RR34

  • Perth, Ontario, Canada
  • Jan 30th
Bolton Tools 11" Slow Speed Metal Cutting Cold Saw With Swivel Base

Bolton Tools 11" Slow Speed Metal Cutting Cold Saw With Swivel Base

  • Rowland Heights, California, United States
  • Jan 30th
Carolina Industrial Horizontal band saw HD10

Carolina Industrial Horizontal band saw HD10

  • Center, Colorado, United States
  • Jan 30th
Band saw wheel 1-1/2" Bore 11-1/2" OD 1" wide 3/4" wide Blade track cast Iron

Band saw wheel 1-1/2" Bore 11-1/2" OD 1" wide 3/4" wide Blade track cast Iron

  • Middlebury, Indiana, United States
  • Jan 30th
Hydmech VW-18 with optional extra vise.

Hydmech VW-18 with optional extra vise.

  • Spokane, Washington, United States
  • Jan 30th
Hydmech S-20A

Hydmech S-20A

  • Spokane, Washington, United States
  • Jan 30th
GROB INC 18" VERTICAL BAND SAW W BLADE WELDER & LIGHTS MODEL NS18 - 2030 FPM

GROB INC 18" VERTICAL BAND SAW W BLADE WELDER & LIGHTS MODEL NS18 - 2030 FPM

  • Rochester, New York, United States
  • Jan 30th
LETEN MODEL DCM-10 VERTICAL BAND SAW TWIN TABLES 38 INCH THORAT

LETEN MODEL DCM-10 VERTICAL BAND SAW TWIN TABLES 38 INCH THORAT

  • Hudson, Florida, United States
  • Jan 30th

People who viewed this item also vieved

METAL SPINNING

METAL SPINNING

  • Catawissa, Missouri, United States
  • Jun 1st
KENNAMETAL MTVOL-164D 1" SHANK THREADING/GROOVING TOOLHOLDER WITH CARBIDE INSERT

KENNAMETAL MTVOL-164D 1" SHANK THREADING/GROOVING TOOLHOLDER WITH CARBIDE INSERT

  • Ontario, Canada
  • Jun 1st
6" Lathe Face Plate 2-1/4" -6 TPI Threaded Hub

6" Lathe Face Plate 2-1/4" -6 TPI Threaded Hub

  • Lorain, Ohio, United States
  • Jun 1st
Actual Kurt USA 3/4 hex Milling Machine 6" Mill Vise Handle wrench Model D60-23A

Actual Kurt USA 3/4 hex Milling Machine 6" Mill Vise Handle wrench Model D60-23A

  • Grand Rapids, Michigan, United States
  • Jun 1st
Straight-tooth milling cutter 4.734x.121", 1" Hole 40tooth

Straight-tooth milling cutter 4.734x.121", 1" Hole 40tooth

  • Salt Lake City, Utah, United States
  • Jun 1st
Sandvik Balas C3 Collet Chuck .75" SHANK 7" OAL S6 6 C3NFM J2M (LOC1357B)

Sandvik Balas C3 Collet Chuck .75" SHANK 7" OAL S6 6 C3NFM J2M (LOC1357B)

  • Laingsburg, Michigan, United States
  • Jun 1st
System 3R 3R-321.2-4x90 Manual Lathe Chuck Mounted FM42

System 3R 3R-321.2-4x90 Manual Lathe Chuck Mounted FM42

  • Bloomfield, Connecticut, United States
  • Jun 2nd
2x NOS soviet GRAPHITE, CARBON rod, electrode (18mm x 255mm)! or MORE!

2x NOS soviet GRAPHITE, CARBON rod, electrode (18mm x 255mm)! or MORE!

  • Dnepropetrovsk, default, Ukraine
  • Jun 2nd
8x NOS soviet GRAPHITE, CARBON rod, electrode (18mm x 255mm)! or MORE!

8x NOS soviet GRAPHITE, CARBON rod, electrode (18mm x 255mm)! or MORE!

  • Dnepropetrovsk, default, Ukraine
  • Jun 2nd
Tapco Tune Up Kit For Windy SP Port-O-Brake - 10820

Tapco Tune Up Kit For Windy SP Port-O-Brake - 10820

  • Glen Ellyn, Illinois, United States
  • Jun 3rd
Chicago 8L10 Press Brake, 14GA x 10', 75 Ton with Autogauge CNC99 Backgauge

Chicago 8L10 Press Brake, 14GA x 10', 75 Ton with Autogauge CNC99 Backgauge

  • Plainville, Connecticut, United States
  • Jun 3rd
computer controlled coil transformer winder winding machine 0.03-1.8mm new

computer controlled coil transformer winder winding machine 0.03-1.8mm new

  • CN, China
  • Jun 3rd
THE DRILLING MACHINE Book by Bradley 1973 #RB233 Machinists Model Engineers

THE DRILLING MACHINE Book by Bradley 1973 #RB233 Machinists Model Engineers

  • Perth, Ontario, Canada
  • Jun 4th
DIAMOND FOR DRESSING GRINDING WHEELS

DIAMOND FOR DRESSING GRINDING WHEELS

  • Middletown, Connecticut, United States
  • Jun 4th
LOT of 29 NEW GRINDING WHEELS for ID OD GRINDER tool cutter 1 1/2" DIAMETER

LOT of 29 NEW GRINDING WHEELS for ID OD GRINDER tool cutter 1 1/2" DIAMETER

  • Milroy, Indiana, United States
  • Jun 4th
PROCUNIER TRU-TAP CNC HIGH SPEED TAPPING HEAD CAT 40 Cap. #6-1/4" Taps Ser.15000

PROCUNIER TRU-TAP CNC HIGH SPEED TAPPING HEAD CAT 40 Cap. #6-1/4" Taps Ser.15000

  • Louisville, Kentucky, United States
  • Jun 5th
DUMORE Automatic Drill Head 20-011 Not Fully Functional Loc: 2053

DUMORE Automatic Drill Head 20-011 Not Fully Functional Loc: 2053

  • Oregon, Ohio, United States
  • Jun 5th
TAPMATIC 50 TC/DC Reversible Tapping Attachment #6-1/2"

TAPMATIC 50 TC/DC Reversible Tapping Attachment #6-1/2"

  • Oregon, Ohio, United States
  • Jun 5th
Amada .562 x 1.250 tooling

Amada .562 x 1.250 tooling

  • Georgetown, Texas, United States
  • Jun 6th
Amada .510x 1.250 tooling

Amada .510x 1.250 tooling

  • Georgetown, Texas, United States
  • Jun 6th
Amada .850x1.125+120RC Rectangle

Amada .850x1.125+120RC Rectangle

  • Georgetown, Texas, United States
  • Jun 6th
Carbide Burr (SA-1) Cylindrical - Double Cut - 1/4 x 5/8 x 1/4 x 2

Carbide Burr (SA-1) Cylindrical - Double Cut - 1/4 x 5/8 x 1/4 x 2

  • Johnson City, New York, United States
  • Jun 7th
Carbide Burr (SM-4) Coarse Cut Cone - 3/8 x 5/8 x 1/4 x 2 1/2

Carbide Burr (SM-4) Coarse Cut Cone - 3/8 x 5/8 x 1/4 x 2 1/2

  • Johnson City, New York, United States
  • Jun 7th
Lapping Plate; 24"x36"; Challenge Model 739 (CTAM 9635)

Lapping Plate; 24"x36"; Challenge Model 739 (CTAM 9635)

  • Sicklerville, New Jersey, United States
  • Jun 7th
Brown & Sharpe Screw Machine Turret Lathe No. 65 Adjustable Tool Holder 65-122

Brown & Sharpe Screw Machine Turret Lathe No. 65 Adjustable Tool Holder 65-122

  • Flint, Michigan, United States
  • Jun 9th
New Automatic Screw Feeder Supplier 1.0 – 5.0 mm

New Automatic Screw Feeder Supplier 1.0 – 5.0 mm

  • CN,CN, China
  • Jun 9th
LOT OF 12 HSS #1 ACORN DIES 0-80 NF TO 10"-32 UNF TRW

LOT OF 12 HSS #1 ACORN DIES 0-80 NF TO 10"-32 UNF TRW

  • Ellington, New York, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies