air tank regulator for sale, brand-new and used.

SquareTrade © AP6.0

Kobalt Portable Compressed CO2 Regulator with 20 oz. Tank & Hose in Hard Case extra o rings for the tank With manual The rubber cap which should be over the gauge is missing - see picture gauge, there should be a rubber gasket here. Also one of the screws inside the gauge is loose and running around inside their doesn't affect use though War of the hard case clips are missing Otherwise looks to be in Good Used Condition - Tested see photos Great for your Air Nailer, Stapler, Roof Guns, etc.

1X PRESSURE REGULATOR - P/N 90150 P/N 90150 may be used to regulate air pressure from an air tank to any pressure between 0-200 PSI. This is useful for installations that supply air to locking differentials, & air tools. The regulator also provides an easy-to-read gauge that allows adjustment of inline pressure, a 1/4" NPT compression fitting for tank pressure side and a t-fitting that will allow regulated pressure to be fed to two location SPECIFICATION:

* WE ACCEPT CREDIT CARDS* YOU CAN PAY WHEN YOU PICK IT UP! Porter Cable 1.7-HP 20-Gallon Portable Air Compressor Oil-Free Portable Compressor •Sealed pump simplifies maintenance- just drain the tank regularly •Horizontal tank is balanced to move easily around the job site 150 PSI Maximum Tank Pressure •Stores more air for longer tool runtimes 120 PSI Cut-In Pre

Primefit R3802G Intermediate Air Regulator with Steel-Protected Gauge at 100-PSI, 3/8-Inch NPT

Opened but never used and good as new.  Locking air regulator for precisely regulating and maintaining constant air pressure Accurate downstream air pressure regulation between 1 and 145-PSI High impact locking composite regulator knob and steel protected gauge 80-SCFM at 100-PSI with 3/8-inch NPT ports From the Manufacturer   About Primefit Prime Fit Inc. and its affiliated companies have been one of the leading global manufacturers of Pneumatic Tools, Air Accessories and Air Hoses since 1976.

var itemNumber = window.ebayItemID ?

You are bidding on a MSA Ultralite II SCBA fireman’s air supply set up.  This auction includes: 45 SCF @ 2216 psig air tank with 30-minute valve backpack carrier for the air bottle with reflective straps pressure demand regulator with its own 30-minute gauge mask safety bell hardshell carrying case This set up was owned by a local government agency but never used. It is essentially brand new even though the tank has a mfg date of 1995.  The set up is in excellent condition.

var itemNumber = window.ebayItemID ?

Hi you are Bidding on a good working condition Scott 2.2 tank with regulator and tank and tank strap and air pressure guage SCOTT AIR-PAK 2.2 INDUSTRIAL SCBA KIT WITH 2216 BOTTLE- 1/2 HOUR AND PRESUR-PAK REGULATOR WITH VIBRALERT 2216 PSI SCBA W / VIBRALERT. Thanks and Good Luck on your Bids.

Please Call Us At 877-283-7614 or Email Us For A Lead Time This is our Factory-Direct 5.5 HP Honda Driven, V-2 Cylinder, 100% Cast Iron Construction Compressor. We have been building top-quality compressors here at our factory for over 31 years. We build ONLY the best quality or we do not build it!!!

Please Call Us At 877-283-7614 or Email Us For A Lead Time This is our Factory-Direct 5.5 HP Honda Driven, V-2 Cylinder, 100% Cast Iron Construction Compressor. We have been building top-quality compressors here at our factory for over 31 years. We build ONLY the best quality or we do not build it!!!