allen nut for sale, brand-new and used.

Item is one 1500 ohm hum balance or trim potentiometer made by Allen Bradley. Device is labeled KS-5563-L5 Type J. Portion of device markings may be a date code that may vary.

These are new potentiometers 1) Allen Bradley type AB, 1.0 Meg Ohms, 1/4" dia x 1/4" shaft 1) Ohmite Type J, 2.0 Meg Ohms, 1/4" dia x 1/2" shaft Solder eye terminals on both 1 mounting nut included Shipping Information:

Potentiometer, 10-Turn, 10K? ±5%, 2W, Panel Mount, Solder Lug Bourns #3590S-2-103 FEATURES Bushing Mount Metal Shaft and Bushings Wirewound Solder Lugs Sealable (Full Body Seal) Designed For Use In HMI Applications SPECIFICATIONS ELECTRICAL CHARACTERISTICS Standard Resistance: 10K Ohms Total Resistance Tolerance: ±5 % Independent Linearity: ±0.25 % Effective Electrical Angle: 3600 ° +10 °, -0 ° Absolute Minimum Resistance: 1 Ohm

Item is one 250K ohm hum balance or trim potentiometer made by Allen Bradley. Device is labeled B-458575-121 Type J. Portion of device markings may be a date code that may vary.

rfbat .BOXTABLE{ border:1PX solid #FFF;} .BOXTABLE td{ border:1PX solid #FFF;} .STYLE39 {font-family: Verdana, Arial, Helvetica, sans-seri

0-10K ohm single turn pot by AB or Allen Bradley 4 units as shown will be included in the package comes with 3 round solder tabs, locking washers and nut shaft is ~1/4" did not measure Type J JAIN056PI03UA

Enerpac S6000 Hydraulic Torque Wrench Features: Maximum Torque

Sold As: ProAM Off-Road Heavy Duty Front Grub Screw w/ Nut - Set of Four These heavy duty front grub screws have been heat treated to the same standard as the German OEM grub screws, but feature a smaller 3/16" Allen. This design allows the grub screws to be stronger and less likely to crack than the current brittle aftermarket grub screws on the market. For use for VW front beam torsion leaf arm adjusters.

THIS ITEM IS FOR 1 (ONE): ALLEN-BRADLEY TYPE J POTENTIOMETER AS FOLLOWS: 5K (5,000) OHM 2 WATT LOCKING SCREWDRIVER ADJUST LINEAR TAPER VOLTAGE: 500 vDC across terminals APPROX. DIM: 1 1/8" OD X 1/2" deep NEW, old stock with lockwasher, mounting nut, and locking nut. ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUANANTEED.

Cementex 60 piece insulated tool kit in case very nice

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (one): ALLEN-BRADLEY, TYPE J, SHORT SHAFT POTENTIOMETER 500K (500,000) OHM 2 WATT POTENTIOMETER MADE IN U.S.A. LOG (AUDIO) TAPER (at 50% shaft rotation, resistance is about 10% of total from CCW terminal to wiper.) DIM: 1 1/8" DIA X 9/16" BEHIND PAN

Enerpac S6000 Hydraulic Torque Wrench Features:

Crown Nut is $62 from IKA 4 Large Flange Allen Head Screws 1 Smaller Allen Head Screw Came off an MDH-2000 or DR-2000 See other related parts for sale - 5" auger / 7" mixing props / 11" rotor / 18" flange

New Old Stock Lot of (2) Allen Bradley

Up for sale is a brand new Kitagawa Z-260 6-Jaw Custom Built Chuck with a direct A2-5 mount. It is not in the original box. Includes Chuck Wrench, Mounting Chuck Nut, Mounting Bolts, Black ID Plug, 1 set of brand new soft jaws with T Nuts, mounting bolts and Allen Wrenches.

About us Shipping

About us Shipping