Aluminum Angle 3/4 x 3/4 x 48 in, 1/8 in thick, NEW!, .75IN, USA!, US $4.83 – Picture 0

Aluminum Angle 3/4 x 3/4 x 48 in, 1/8 in thick, NEW!, .75IN, USA!, US $4.83 – Picture 1

Aluminum Angle 3/4 x 3/4 x 48 in, 1/8 in thick, NEW!, .75IN, USA!, US $4.83 – Picture 2

Aluminum Angle 3/4 x 3/4 x 48 in, 1/8 in thick, NEW!, .75IN, USA!, US $4.83 – Picture 3

Aluminum Angle 3/4 x 3/4 x 48 in, 1/8 in thick, NEW!, .75IN, USA!, US $4.83 – Picture 4

Aluminum Angle 3/4 x 3/4 x 48 in, 1/8 in thick, NEW!, .75IN, USA!, US $4.83 – Picture 5

Aluminum Angle 3/4 x 3/4 x 48 in, 1/8 in thick, NEW!, .75IN, USA!, US $4.83 – Picture 6

Aluminum Angle 3/4 x 3/4 x 48 in, 1/8 in thick, NEW!, .75IN, USA!, US $4.83 – Picture 7

Aluminum Angle 3/4 x 3/4 x 48 in, 1/8 in thick, NEW!, .75IN, USA!, US $4.83 – Picture 8

Aluminum Angle 3/4 x 3/4 x 48 in, 1/8 in thick, NEW!, .75IN, USA!, US $4.83 – Picture 9

Aluminum Angle 3/4 X 3/4 X 48 In, 1/8 In Thick, New!, .75in, Usa!

US $4.83

Old Fort, North Carolina, United States
Jan 30th

Open on mobile:
QR code

Aluminum Angle 3/4 x 3/4 x 48 in, 1/8 in thick, NEW!, .75IN, USA! Description – These are fabricated from a 3003 Aluminum Alloy and measure 3/4 x 3/4 x 48 x 1/8 thick. We ship from three locations including NC, OH, and sometimes from our truck. This angle is based on our ever popular 3/4in x 1/16 angle that we also sell. Note: The States of AK, AZ, CA, HI, ID, NM, NV, OR, TX, UT, WA, PR, and GU have shipping surcharges. Please check “Shipping Surcharges” section below for amounts before purchasing. If purchasing three or less angles, flats, or tubes, there is high risk of bending in shipping due abuse of the shipper. You are responsible for any damage unless you purchase the :”Protective Packaging Option” (see below). They can be bent, shaped, or reshaped much more that big chain store angles and flats before they break because of the 3003 alloy grade. Our angles have a rounded bend instead of an sharp edge common to most extruded angles. The electrical and thermal conductivity is higher for this type of aluminum than other grades. Some pieces may have magic marker on them or light scratches. Light scratches are common, magic marker is rare. Combined Shipping for Multiple Items If purchasing one type of an item click on “Shipping and Payments” tab to see the price break on shipping. Combined shipping is not available for multiple items because we stock items in multiple shipping centers and we can not predict which items will be available at which centers at the time of your order. We can often offer combined shipping by special arrangement if you are purchasing more that 12 items, please contact us by email or cell at: (six, seven, eight,)-(two, zero, zero)-(zero, eight, six, two). Lots of Applications and Uses! Can be used for: Ladder hangers, fences, signs, product design, hobbies, r/c, survey or garden stakes, electrical components, trailers, aircraft, automotive, drawers, furniture, outdoor, home, high power LED lighting, kennels, livestock, jewelry, cuffs, flashing, heat press transfer processes, radiators or thermal sinks, wind power, hangers for countertop deep fryer, guides for bubble wrap, balances as very cheap alternative to digital shipping postal scale, ruler, straightedge, vinyl cutter and sign cutting, hydroponics, wheel stops for portable gas power camping RV generator, brackets for hydrogen generation, Arduino projects, rulers, sliders of all kinds, mounts for infrared PIR occupancy motion sensor switch, CNC projects, little signs for laser engraving or routing, serial number tags, wind chimes, mobiles, for building 3D printer, wire holders of all kinds, and lots of other things! Visual Requirements These may have discolorations or splotches from time to time. This often looks white. This is rare, but if your application requires a good visual appearance please let us know in the notes section of your order so we may double check our stock and make sure you receive our best appearing pieces. Safety Notification These are formed through a fabrication process and may have sharp edges. We try to keep this to a minimum, but still recommend wearing gloves to protect your hands until they can be fully inspected to make sure it will be safe and will not cause injury to people for your application. Cutting Information and Custom Lengths or Different Sizes These cut easier than the big chain hardware stores because of its alloy. Most people use a fine metal tooth hacksaw, jig saw, and we have had reports of excellent results using a straight sheet metal shears. Ability to use a sheet metal sheers can lower the cutting and fabrication time of your project considerably. Warning: The use of circular saws can cause this material to jam and fly out violently. Most circular saws go too fast which cause the particles to become extremely hot and they fly much faster than wood that can create eye injuries. We can cut to length or cut different sizes for a cutting charge. For example we can take a 3/4 x 3/4 angle and make it a 1/2 x 3/4 angle. The cutting fees are as follows: Type of Cut First Cut Additional Cuts Example Cut to Length $4.00 $1.00 Cut Length from 48 In to 41 In Cut to Size $4.00 $4.00 Cut Size from 3/4 x 3/4 Angle to 1/2 x 3/4 Angle There is a tolerance of +/- 1/16 of an inch for dimensions 6 inches or less, and +/- 1/8 of an inch above 8 inches. If shipping international, many counties have a max shipping length less than 48in, which requires us to cut before shipping. For other custom sizes and lengths that we cannot cut down from our existing stock it usually $100 min because we are required to purchase full length or full sheet sizes from our suppliers. This applies to any dimension over 48in and any total width more than 12in. We can fabricate any size and shapes starting 1/2 in and we call also produce angles, channels and flats, in metric sizes. We have lengths longer than 48in but Minimum Order Quantity applies. For example a 1in angle uses 2in of material. 48/2 = 24 pcs. To figure cost: Cost = ((Desired Length / 48) * List price for 48in * Minimum Order Quantity) + $20. Shipping charges are additional. American Made! All my angles and flats are sourced and manufactured in the USA including all the raw materials that go into them. They are made in the states of NC and FL. Despite the lower price the quality is very consistent and high and we always strive to do better. Protective Packaging Option This option protects your items from shipping damage using a cardboard tube mailer. The cost of using this option is an extra $11.68 per order. Purchase quantities of 4 or more items do not need this option as the strength becomes so much more its very rare they get damaged. We must charge this much to cover our costs because the weight of the reinforement raises the weight of the order enough that we are required to use the more expensive priority or parcel rates. If you want the Protective Packaging Option please let us know in the notes section of your order when you pay and we will send you an invoice for the additional amount. Related Products or Packages I also have other aluminum angles or flats sizes available. You can find these by clicking on “Happy Stompers” store link at the top of this page. Item Description 1 Angle .50 x .50 x 48 in x 1/16 thick 2 Angle .63 x .63 x 48 in x 1/16 thick 3 Angle .75 x .75 x 12 in x 1/16 thick 4 Angle .75 x .75 x 16 in x 1/16 thick 5 Angle .75 x .75 x 48 in x 1/16 thick 6 Angle 1.0 x 1.0 x 48 in x 1/16 thick 7 Angle 1.0 x 2.0 x 48 in x 1/16 thick 8 Angle 1.5 x 1.5 x 48 in x 1/16 thick 9 Angle 1.5 x 1.5 x 48 in x 1/8 thick 10 Angle 2.0 x 2.0 x 48 in x 1/16 thick 11 Flat 1.00 x 48 in x 1/16 thick 12 Flat 1.50 x 48 in x 1/16 thick 13 Flat 1.50 x 48 in x 1/8 thick 14 Flat 2.00 x 48 in x 1/16 thick 15 Flat 3.00 x 48 in x 1/16 thick 16 Flat 4.00 x 48 in x 1/16 thick 17 Flat 5.00 x 48 in x 1/16 thick 18 Flat 6.00 x 48 in x 1/16 thick 19 Flat 12.00 x 48 in x 1/16 thick 20 Pro Channel .75 x .75 x .75 x 48 in x 1/16 thick 21 Round 0.75 x 48 x 1/16 thick 22 Round 1.00 x 48 x 1/16 thick 23 Round 1.50 x 48 x 1/16 thick 24 Square 1.00 x 48 x 1/16 thick 25 Square 1.50 x 48 x 1/16 thick 26 Rectangle 0.75 x 1.00 x 48 x 1/16 thick 27 C-Channel Offset 2.25 x 3 x .75 x 1/8 thick Shipping Surcharges and International Orders Your order may have a shipping surcharge depending on the State and quantity you order. Surcharges start at quantities of 1-4, depending on size and distance, and usually disappear when purchasing 8-10 or more pieces. These States and maximum surcharge rates are as follows: State Max Surcharge AK 65% AZ 55% CA 55% HI 65% ID 55% NM 50% NV 55% OR 65% TX 50% UT 50% WA 65% US Protectorates 65% APO/FPO 65% If there is a surcharge you will be notified after the order with the amount and additional instructions will be sent by email to the email that is listed on your Paypal account. We can ship this item internationally, but please inquire with us before purchasing to get a price quote on the shipping costs, and necessary length requirements and cutting charges. Compare and Save, Buy More Save More After you add up all the shipping and taxes my price runs about 1/4 to 3/4 the price of big chain sources depending on how many you buy. The more you buy the cheaper each angle or flat costs. And I always have them in stock. Compare and save! 3003 Aluminum Alloy These angles or flats are made from 3003 Aluminum Alloy. This alloy is about 20% stronger than 1xxxx series having high strength and fatigue resistance. It has excellent corrosion resistance. They are easy to work with and can be polished, brazed, welded, machined, drilled, riveted, bolted, cut, bent, re-bent, sanded, grounded, painted, filed, and buffed to an almost mirror like finish. It can be bent and re-bent more times than higher number alloys before it becomes brittle and breaks. Does not become brittle in extreme subzero weather and keeps its structural strength to 700-900 degrees Fahrenheit melting at about 1150 degrees. Its high electrical conductance is good for making electrical components or for using as grounding stakes. They dissipate heat quickly making for good custom thermal radiators and heat sinks of all kinds. Customer Feedback: “I like the radius on the corner compared to the square cornered hardware store angles. I used them for the perimeters of the instruments panels on my homebuilt biplane. I used one straight piece for the bottom and slotted one to bend for the top and side perimeter. Attached them with 3/32" flush head aircraft rivets. I also used them to reinforce the sheet metal on the engine cowl side gull-wing style access doors. I also used them to build a triangulated frame to support and attach a battery box. an excellent product and a good price, highly recommended” Bob Questions and Answers: Q. Some of your product descriptions for 1/16 metal says it is less than 1/16th of an inch thick, how much less is it? A. The actual thickness is .050in and 1/16th of an inch is .0625in. The difference adds up to about the thickness of 5 to 6 sheets of paper. Q. Are they straight? A. They are very straight with straightness comparable to a sheet of glass. Send Us Your Pictures We love to see the creative projects of our customers. Please send us your pictures and we will upload them to our web pages to help inspire other creative individuals. If you are making something to sell as your profession please let us know and we will help promote your product in our newsletters and photo galleries. PAYMENT METHOD: Special additional handling and shipping charges for all international orders. Most people pay through the Paypal.com website. Please pay immediately after purchasing as this simplifies the payment tracking process and will result in you receiving your item several days sooner. We handle some orders, such as bulk or distributor orders over the phone. There is a processing fee to place an order over the phone as a private party using a credit card. DELIVERY, TRACKING, SHIPPING CENTERS, CANCELATIONS, SHIPPING SURCHARGES, AND GREEN PACKAGING: Same day Next Day 2nd Day 3rd Day 90% 7% 2% <1% 90% of our orders are shipped the same day if placed by 3pm Eastern time unless noted otherwise. We are hit about 97% in getting our shipments out by next business day. There however are exceptions because we travel a lot in our work and don’t always have access to a shipping center or other factors outside our control. If your delivery date is critical please contact us before ordering. Most items over $20 have shipping numbers, but not all our shipping centers have upload ability for our shipping numbers. We have multiple shipping centers and will ship from the closest one whenever possible. Our company policy does not allow us to release any information regarding our customers or their purchases. For this reason we cannot positive feedback for your prompt payment. We cannot cancel an order once it has shipped and must be processed through return and refund process. Surcharges and International Orders – Some states may have surcharge shipping rates. These states may include AK, HI, CA, WA, OR, ID, NV, AZ, NM, and TX. If there is a surcharge you will be notified after the order with the amount and additional instructions will be sent by email for making the payment to the email listed in your Paypal account. If you feel the surcharge is too high we will refund the order. Smaller items that ship by letter rates, such as a singe DVD, usually do not have surcharge. We can ship almost all items internationally, but please inquire with us before purchasing to get a price quote on the shipping costs. We use recycled packaging materials in packing our items for shipment. We will use a bicycle when possible to bring the items to the nearest shipping center to reduce the environmental impact as much as possible. RESOLVING AN ISSUE: The fastest and best way to resolve an issue is to contact us directly by email or phone (six, seven, eight,)-(two, zero, zero)-(zero, eight, six, two). Do not open an eBay or Paypal case as it creates extra labor for us and can delay the resolution process by up to 30 days. Once a case is opened they draft the full purchase price of the item from our account and do not restore it for up to 30 days after the case is closed. This increases our product costs and lowers our customer service to you and future customers. Only open a case if you can-not resolve the issue by contacting us first. GREEN SOLAR COMPANY These angles and flats are sold under the Green Solar Company that was formed in 2012 to help develop innovative solutions that lowers costs of using electrical solar power. The development of low cost aluminum angles for the trim pieces and the seals was critical in helping to achieve this goal. These angles are now available for lots of different applications. The Green Solar Company operates under the management of the ASPS Dance Company which shares this store.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	ASPS
Country/Region of Manufacture	United States
Model	ASPS
Country of Manufacture	United States