aluminum bushing for sale, brand-new and used.

Here up for auction is the Gator Power 6" Grinding wheel For bench or top grinders. It comes with the bushing set. It's a 36 coarse.

BENCH / PEDESTAL GRINDING WHEEL, NORTON 42292 ALUNDUM / ALUMINUM OXIDE SIZE, 7" OUTSIDE DIAMETER WIDTH, 1" MOUNTING HOLE SIZE, 1" COMES WITH BUSHING FOR 1/2", 5/8" AND 3/4" GRIT, 36/46 MAX RPM, 3600 COLOR, LIGHT GRAY

ACE 21132 ALUMINUM OXIDE GRINDING WHEEL 6" X 1" X 1" 80 GRIT - FINE FOR USE ON BENCH TOP GRINDERS. INCLUDED ADJUSTABLE BUSHINGS TO FIT" 1", 3/4", 5/8" & 1/2" SHAFTS. THIS GRINDING WHEEL HAS SAT ON THE SHELF FOR YEARS, BUT HAS NEVER BEEN USED.

ACE 21134 ALUMINUM OXIDE GRINDING WHEEL 6" X 1" X 1" 36 GRIT - COARSE FOR USE ON BENCH TOP GRINDERS. INCLUDED ADJUSTABLE BUSHINGS TO FIT" 1", 3/4", 5/8" & 1/2" SHAFTS. THIS GRINDING WHEEL HAS SAT ON THE SHELF FOR YEARS, BUT HAS NEVER BEEN USED.

You are bidding on ( 1 ) new Norton 63054, 12" x 2" x 1 1/2", 24 Grit, Very Coarse Grinding Wheel P/N 66253263054 Bench & Pedestal Size - 12" Width - 2" Arbor - 1 1/2" w/ Bushing 1" & 1 1/4" Grit - 24 Material - Aluminum Oxide Made in USA Shipping will be USPS Priority Mail or UPS Ground for 23 lbs. We use Ebay Shipping Calculator to figure our shipping. We ship USPS Priority Mail unless item is listed with different shipping details.

New!! Norton 8" X 3/4" X 1" Bench / Pedestal Grinding Wheel. Norton Part Number 66253042316.

You are buying 1 De burring ,Polishing and blending wheel grit 240 1"X6" X1" I HAVE BUSHING IF NEEDED THANKS AL. O.(aluminum oxide) med. DENSITY I DO HAVE BUSHING FOR 1/2",5/8 ",3/4" FOR A LITTLE MORE PLEASE ASK MY WHEELS ARE ALL NEW TAKEN FROM ORIGINAL PACKING TO SHIP CHEAPER Thanks for looking and check my other listings ?

You are buying1Deburring ,Polishing and blending wheel grit 80 S.C. MEDIUM DENSITY (SILICON CARBIDE WILL DE BURR ALMOST ALL METALS AND GLASS) ?

SELLING 1 GENTLY USED PCS SPRUE BUSHING REAMER HR-1. I USED THIS NO MORE THAN 3 TIMES AND ONLY IN ALUMINUM AFTER MACHINING THE TAPER TO WITHIN APPROX .010" BASICLY I JUST FINISHED WITH IT AS YOU SHOULD. LIST PRICE IS $261.90

Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.

HI UP FOR SALE IS A AVIATION DRILL BLOCK WITH CHIP RELIEF CUT INTO THE BOTTOM OF THE BLOCK. USED FOR DRILLING AND MAINTAINING A 90 DEGREE HOLE. INSTALLED IN THE BLOCK ARE 5 HEADLESS PRESS FIT BUSHING THEY ARE A #10 .1935, #21 .1590, #30 .1285, #40 .0980 AND THE CENTER ONE IS 1/4 .2500.

UP FOR SALE IS THIS ALUMINUM OFF SET DRILL BAR MADE OF 6061 T6 ALUMINUM. THE BAR HAS A 3/8 I.D. PRESS FIT BUSHING INSTALLED IN IT.

HI UP FOR SALE IS A AVIATION DRILL BLOCK WITH CHIP RELIEF CUT INTO THE BOTTOM OF THE BLOCK. USED FOR DRILLING AND MAINTAINING A 90 DEGREE HOLE. THIS ONE IS FOR A 1/4 (.250) DIAMETER DRILL OR REAMER.

If you have any questions regarding this machine, please contact Michael @ (909) 652-1400. Make: Sunnen Country of Origin: USA Model #: MBC-1801D Serial #: 81707 Condition: Great, Although the photos show the machine has the foot pedal, it no longer has it attached and would need another one attached or fabricated to fit. Otherwise the machine runs as it should.

If you have any questions regarding this machine, please contact Michael @ (909) 652-1400. Make: Sunnen Country of Origin: USA Model #: MBC-1802D Serial #: 82628 Condition: Great Features: Setup and changeover are so fast and easy (even with Automatic Sizing) you can be running pieces on the hone long before you'd have a grinder ready to go. The universal honing fixure handles nine out of ten jobs.

CNC Machined from 6061 T6 Aluminum. Replaces Emco part number B4A 020 020. All that's included is the replacement part and the bronze bushing.

Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2009. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-383-7.

This Is a Custom Manufactured Accessory Design specificaly for the Hardnge Toolroom Lathe. This will hold the cross slide dead nuts.You can do a simple test for Cross slide movement. with a digital readout grab the tool holder and push and pull on the cross slide.

YOU ARE BIDDING ON 8 (3/4"INSIDE DIAMETER) SERRATED PRESS FIT BUSHINGS WITH AN OUTSIDE DIAMETER OF 1". TOTAL LENGTH IS 1" WITH 1/2" DEDICATED TO SERRATIONS. TOLERANCES ARE LESS THAN .001".