Aluminum Knobs & Amplifiers (Passive Electrical Components) for sale, page 118

Dual stacked solid aluminum red line concentric control tuning knob set

Albuquerque, New Mexico, United States
Jan 29th

Vintage Solid Aluminum Dual-Stacked Knob Set Pulled from vintage equipment, this concentric knob set is made of solid aluminum. Knurled edges with separate red indicator lines. Lower knob is 1" in diameter x 0.50" tall, hole for 1/4" shaft.

Red dakaware dual stacked pointer control knob daka-ware fine tuning

Albuquerque, New Mexico, United States
Jan 29th

Vintage Stacked Red Dakaware Knob Set Pulled from vintage equipment, this concentric knob set is made of darkish-red plastic. Bottom knob is marked Daka-Ware Made in Chicago on underside. Upper knob is not marked.

Lot of 4 grey plastic skirted control white arrow knobs for 1/4" shaft ~ tuning

Albuquerque, New Mexico, United States
Jan 29th

Set of 4 Knobs Pulled from vintage equipment, set of 4 knobs is made of grey plastic with white arrow indicator. Measures 1.16" in diameter at skirt x 0.74" tall. Hole for 1/4" shaft (notice that it will accommodate both a regular pot shaft and a more unusual D-shaped one.

Black 1.5" skirted 0 to 10 control knob dial for d-shaped shaft ~ tuning dial

Albuquerque, New Mexico, United States
Jan 29th

Skirted Control Knob Black plastic control knobs feature a skirted dial marked 0 to 10. Skirt measures 1.5". Knob stands 0.65" tall.

Black dakaware dual stacked pointer control knob daka-ware fine tuning

Albuquerque, New Mexico, United States
Jan 29th

Vintage Stacked Black Dakaware Knob Set Pulled from vintage equipment, this concentric knob set is made of black plastic, possibly Bakelite. Bottom knob is marked Daka-Ware Made in Chicago on underside. Upper knob is not marked.

Tektronix dual stacked calibration "cal" knob ch1/ch2 volts div skirted dial

Albuquerque, New Mexico, United States
Jan 29th

Tektronix Calibration Knob Set Pulled from used equipment, this Tektronix dual-stacked calibration knob set features a clear plastic numbered skirt on the bottom knob. Grey portion measures 1.93" from front to back. Skirt is 1.15" in diameter.

Grey buttons,260-0950-40,1.5 cm diameter,push in,10 pcs

Henderson, Nevada, United States
Jan 29th

VEGASELECTRONICSLLC PRESENTS;

Qty 1 knob ms91528-1e1b by ehc 5/8 in dia 1/8 shaft black w. white dot - nos

Vaudreuil-Dorion, Quebec, Canada
Jan 29th

Qty 1 Knob MS91528-1E1B by EHC 5/8 in Dia 1/8 Shaft. Black w. White Dot.

Qty 1 knob ms91528-1hh2b by ehc 5/8 in dia 1/4 shaft black w. white mark - nos

Vaudreuil-Dorion, Quebec, Canada
Jan 29th

Qty 1 Knob MS91528-1HH2B by EHC 5/8 in Dia 1/4 Shaft Black w. White Mark. New old stock (NOS) item.

Qty 1 knob ms91528-1k2b by ehc 5/8 in dia 1/4 shaft black - nos

Vaudreuil-Dorion, Quebec, Canada
Jan 29th

Qty 1 Knob MS91528-1K2B by EHC 5/8 in Dia 1/4 Shaft Black. New old stock (NOS) item. WE WILL COMBINE SHIPPING ON MULTIPLE ITEM ORDERS.

Induro tripods 479-080 low profile knob for video heads with 10 mm shaft black

United States
Jan 29th

The Lotoons Store NEW Induro Tripods 479-080 Low Profile Knob for Video Heads with 10 mm Shaft Black

Alco p/n kln700b1/4 solid aluminum, machined knobs, for 1/4" shaft nos 3/4"od

Quincy, Michigan, United States
Jan 29th

THIS ITEM IS FOR 1 (ONE): ALCO (TYCO or TE CONECTIVITY) TOP QUALITY KNOB. These are machined solid aluminum knobs. Alco P/N is: KLN700B1/4 OD: .750" HT: .625" HOLE: FOR 1/4" SHAFT, 2 set screws COLOR: BLACK, STRAIGHT KNURL, W/WHITE INDICATOR LINE ON SIDE AND TOP These are top quality, made in Japan, and are New, Old Stock.

Knobs, collet type with optional colored tops 1/4 inch shaft

Rising Fawn, Georgia, United States
Jan 29th

High Quality collet type knobs for 1/4 inch shaft. Each knob supplied with both a red and a black cover. Body of knob is black.

10 x wafer connector 2.54mm 2 pins right angle - ztzshop -free shipping

Bangkok, Thailand
Jan 29th

Descriptions 10 x Wafer Connector 2.54mm 2 Pins Right Angle Detail Manufacturer : GTK Manufacturer Part No : 700102RT RoHS Compliance

Red knob for 1/8" shaft w/pointer .710" od x .735"w 1 pcs.

Quincy, Michigan, United States
Jan 29th

THIS ITEM IS FOR (1) ONE: RED KNOB FOR 1/8" SHAFT DIM: .710" OD X .735" H KNURLED RED PLASTIC WITH WHITE LINED POINTER. ALUMINUM INSERT, SPUN ALUMINUM CAP, WITH 2 SET SCREWS. Very nice quality & condition.

Knob for 1/8" shaft .579" od x .335 h solid metal nos

Quincy, Michigan, United States
Jan 29th

THIS ITEM IS FOR (1) ONE: KNOB FOR 1/8" SHAFT SIZE: .579" OD X .335" H KNURLED METAL, CHROME LIKE FINISH 1 SET SCREWS. Very nice quality New, old stock. Buyer pays S&H, $2.95 in USA, $7.95 worldwide.

Knob for 1/8" shaft .7" od x .61"h black # 1n1b - m91528 series

Quincy, Michigan, United States
Jan 29th

THIS ITEM IS FOR (1) ONE: KNOB FOR 1/8" SHAFT .7" OD X .61" H KNURLED BLACK MATTE PLASTIC. ALUMINUM INSERT, 2 SET SCREWS. MADE BY CONTROL KNOBS, INC.

1/4" shaft collet knobs 15 mm no sifam/selco sp150-250 black nos

Quincy, Michigan, United States
Jan 29th

LOT OF 1 (one), SIFAM/SELCO P/N SP150-250, BLACK COLLET KNOB WITH NUT CAP. DIM: 15 MM at BASE 12 MM at TOP 13.5 MM HEIGHT SHAFT: 1/4 INCH Just screw down the nut to tighten onto a 1/4" OD shaft. The pictures show the complete knob, the parts to the knob, and the sixth picture shows the knob installed on a pot (NOT included).

Alco solid aluminum, machined knobs, # kb500b1/4 top quality for 1/4" shaft nos

Quincy, Michigan, United States
Jan 29th

THIS ITEM IS FOR 1 (ONE): ALCO (TYCO or TE CONECTIVITY) TOP QUALITY KNOB. These are machined solid aluminum knobs. Alco P/N is: KB500B1/4 OD: .500" HT: .787" HOLE: FOR 1/4" SHAFT, 2 set screws COLOR: BLACK W/WHITE INDICATOR ON TOP Straight knurl These are top quality and are New, Old Stock.

Aluminum pointer knobs for 1/8" shaft small size 3/8"w x 11/16"l nos

Eau Claire, Michigan, United States
Jan 29th

THIS ITEM IS FOR 1 (ONE) ALUMINUM POINTER KNOB FOR 1/8" SHAFTS. VERY SMALL SIZE APPROX. DIM: 3/8" OD X 11/16" LONG.