Aluminum Knobs & Amplifiers (Passive Electrical Components) for sale, page 127

1.5 inch ohmite model 5150 heptagonal control knob - lot of 10

Cambridge, Massachusetts, United States
Jan 29th

Ohmite Manufacturing Model 5150 control knob, for use on Ohmite rheostats (Models H,J,G,K and L) or any potentiometers or other rotary controls with a 1/4” shaft. Uses a slotted set screw. The knob is 1.5” diameter at the skirt and 3/4” thick at center.

2 solid aluminum skirted pointer knobs 1.37" w/black cap & screw connection

Albuquerque, New Mexico, United States
Jan 29th

2 Pointer Knobs Pulled from used equipment, this pair of knobs is made of solid aluminum with a skirted base and fluted barrel. Measures 1.37" in diameter at the skirt x 0.92" tall. Hole for shaft is 0.32" in diameter.

Two ( 2 ) grayequipment split shaft potentiometer rotary knobs

Shirley, New York, United States
Jan 29th

Two ( 2 ) GrayEquipment Split Shaft Potentiometer Rotary Knobs Picture actual items shipped Has two set screws to tighten on shaft. See pictures.

Black 1.5" clear skirted 0 to 10 control knob ~ tuning dial plastic aluminum top

Albuquerque, New Mexico, United States
Jan 29th

Skirted Control Knob Black plastic control knobs feature a clear-skirted dial marked 0 to 10. Skirt measures 1.5". Knob stands 0.85" tall.

3 solid 1/2" aluminum knurled knobs ~ brass lined control tuning ~ screw connect

Albuquerque, New Mexico, United States
Jan 29th

3 Knobs Pulled from used equipment, this trio of knobs is made of solid aluminum with knurled barrels. Measure 1/2" in diameter x 5/8" tall. Hole for shaft is 1/8" in diameter.

Lot of vintage knobs

Murrieta, California, United States
Jan 29th

LOT of Vintage Knobs PLEASE READ ENTIRE DESCRIPTION! For sale: Lot of Vintage Knobs Condition: Varied. Some are better than others.

Black 1" skirted white line pointer knob ~ made in japan ~ brass lined

Albuquerque, New Mexico, United States
Jan 29th

Pointer Knob Pulled from used equipment, this retro style knob was made in Japan of hard plastic. Skirted white line pointer with fluted sides. Measures a fraction less than 1" in diameter (0.912") x 0.59" tall.

Lot of 5 black plastic 3/4" pointer knobs ~ spline style, no set screws

Albuquerque, New Mexico, United States
Jan 29th

Lot of 5 Pointer Knobs Pulled from used equipment, set of 5 pointer knobs are made of lightweight black plastic with a white dot and indented groove along the edge to serve as pointer. They measure 3/4" in diameter x 2/3" tall and are spline style for 1/4" shaft. Not a set screw type knob.

Set of 6 black 3/4" knurled knobs w/aluminum trim control pointer tuning

Albuquerque, New Mexico, United States
Jan 29th

Lot of 6 Pointer Knobs Pulled from used equipment, set of 6 pointer knobs are made of weighty hard black plastic with aluminum inset in the top. Finely knurled sides to barrels. One of them has a white line to serve as a pointer, all have a black dot on top.

(25) black knob with white pointer soft touch - tayda electronics

Grandview, Missouri, United States
Jan 29th

Manufacturer: Tayda Electronics AUCTION IS FOR 25 KNOBS Soft Touch - High Quality Suitable for use with Rotary Potentiometers or Rotary Switches with Split Shaft 6mm Diameter BLACK WITH WHITE POINTER for Easy Identification Ideal for Mixer Boards Height: 17mm Bottom Diameter: 16mm Top Diameter: 12mm

Lot x 2 potentiometer control volume knob cap silver

Miami, Florida, United States
Jan 29th

Lot x 2 Potentiometer Control Volume Knob Cap Silver

Philmore 3040 ribbed knob with skirt indicator line

Elmwood Park, New Jersey, United States
Jan 29th

Popular Philmore Knob #3040. Ribbed with skirt indicator line. Black bakelite material, brass insert for 1/4" shaft with set screw.

Round knobs gibraltar - (knurled, fluted & mushroom) male 1/2-13

New Bedford, Massachusetts, United States
Jan 29th

Round Knobs Gibraltar - (Knurled, Fluted & Mushroom) MALE 1/2-13

Philmore 277ap black pointer knob qty: 1 per pack

Elmwood Park, New Jersey, United States
Jan 29th

Popular Philmore Knob #277AP. Black pointer knob with indicator line. 1.25" long.

Lot of 28 vintage beveled top black knobs ~ nos ~ for radios & electronics

Saugerties, New York, United States
Jan 29th

This auction is for the above pictured lot of 28 vintage knobs complete with set screws. New Old Stock Email me with any questions you may have and check out my other auctions for more vintage knobs ~ always happy to combine shipping charges when possible. Thanks for looking and happy bidding!

Lot of 5 dual stacked pointer control knobs fine tuning ~ concentric

Albuquerque, New Mexico, United States
Jan 29th

Lot of Dual Stacked Knobs Pulled from vintage equipment, this lot of 5 concentric knob sets are made of plastic with a metal core. Bottom knobs measure 0.70" in diameter, not including the pointers. Each pair is 1.16" tall.

Tiny red & dark grey knurled knob 0.369" diameter x 0.397" tall ~ for 1/8" shaft

Albuquerque, New Mexico, United States
Jan 29th

Tiny Two-Tone Knob Pulled from vintage equipment (most likely Tektronix), tiny two-colored knob could work as the upper knob for a dual stacked set, or on its own with a potentiometer that has a 1/8" shaft. Measures 0.369" in diameter x 0.397" tall. Set screw on the side.

3 black knurled pointer knobs ~ brass lined hard plastic ~ white line ~ spline?

Albuquerque, New Mexico, United States
Jan 29th

3 Pointer Knobs Pulled from used equipment, this trio of knobs is made of hard plastic with knurled barrels. Brass lined. Measure 0.8" in diameter x 0.58" tall.

2 black wing nut pointer knobs 1" across ~ knurled white line aluminum tops

Albuquerque, New Mexico, United States
Jan 29th

2 Pointer Knobs Pulled from used equipment, set of two of knobs is made of hard plastic with knurled barrels and aluminum trim on top. Short wing nut style extrusions to each side make the knobs easier to turn. White line down on of the sides.

Multipart 1.5" control dial knob ~ picoseconds/nanosceconds ~ aluminum w/brass

Albuquerque, New Mexico, United States
Jan 29th

Dial Control Knobs Unusual used multipart knob looks like it's designed to dial in picoseconds and nanoseconds. Made of solid aluminum (lower black part is anodized), with a black plastic cam on top. Brass insert liner for 1/4" shaft.