aluminum reducer for sale, brand-new and used.

AUCTION IS FOR TWO, NEW: Ilsco SPA-2 Dual Rated Splicer Reducers; 14-2 AWG Product Details • Large screw diameters maximize wire contact •

SquareTrade © AP6.0

Gardner Bender GSPA-2 14-2 AWG Aluminum Splicer and Reducer, 2-Pack

For your consideration, I have this Abart 2-1/4 gear speed reducer removed from a Federal Sign and Signal Thunderbolt outdoor warning siren. This gear speed reducer is used in the Thunderbolt siren horn rotator mechanism to reduce the speed from the siren horn rotator motor and drive the rotator. This gear speed reducer needs the gaskets resealed and new seals for the input and output shafts as they were slowly seeping oil by.

NEW SEMI-AUTOMATIC TORCH GAS CUTTING MACHINE CUTTER CG1-30B

GAS CUTTING MACHINE SEMI-AUTOMATIC CUT DOUBLE TORCH CG1-100 CUTTER BRAND NEW

Panduit PISR1/0-1 In-Line Splicer/Reducer, Clear Insulation, 1/0 AWG STR - #14 AWG STR/#8 AWG SOL - #14 AWG SOL Conductor Size Range, 0.95" Width, 1.41" Height, 2.91" Length

ALUMINUM SULFATE (HYDRATE) 99 % PURE 2 lb - FREE PRIORITY SHIPPING Uses of Aluminum Sulfate Al2O12S3, Aluminum sulfate has many different uses in day-to-day life, as well as being used in several essential industries. In fact, you probably come into contact with it on a daily basis without even knowing it! Household Uses Some of the most common uses of aluminum sulfate are found within the home.

E13 IPB-NA4-2S Aluminum Clear Pre-Insulated Power Bar 14 solid to 4 stranded For any combination of copper or aluminum SINGLE SIDED ENTRY For spl

So I have these cool Aluminum things. I think they are likely a gear reduction device, but who knows (if you tell me the right answer I will send you 2 for 1). All aluminum single part.6-7/8" tallnarrow end is 3" in diameterwide end is 6" in diameterThe place the belt is supposed to go is 13-1/2" in circumferenceThe narrowest part is 6-3/4" in circumferenceThey weight 8.5 ounces each.

Morris 90615 Morris Products 90615 aluminum Splice/Reducer, Mechanical Connector Type, 2 Screws, 2/0-#8 Wire Range >> Other Connectors, Tools & Accs

Huge NAP Gladu A45

Aluminum!, Lanj Tools Impact Socket Insert. Like all Lanj Tools impact socket inserts, this aluminum insert is machined out of solid round bar stock here in the USA in state-of-the-art facilities. Where light weight is a premium, and you are not using this insert for many cycles....this aluminum insert fits the bill.

One new of the following :

Aluminum Splicer Reducer 500 MCM - 3/0 AWG Aluminum Splicer Reducers are used for splicing two copper or aluminum wires of equal or different sizes. Made of 6061T-6 aluminum alloy. Tin plated for low contact resistance.

GREAT USED CONDITION ONLY USED A FEW TIMES OUR SHRINK WRAP WAS TOO THIN!

Please read carefully before you bid/buy Auction for: 2 Items Pulley 20 Teeth bore diameter 1/4" Timing Belt 396.24mm/15.6" length, 15 mm width Reducing Ratio 1:1 used for same ratio transmission Other belt length are available or for any custom belt length please contact us For full specif

Please read carefully before you bid/buy Auction for: 1 Item Pulley 40 Teeth bore diameter 1/4" 1 Item Pulley 20 Teeth bore diameter 1/4 " Timing Belt 16" 406.4mm length, 15 mm width Reducing Ratio 2:1 For full specification please visit