This is a lot of (12) used 7/16" x 3" NC Titanium bolts with (12) nuts, (24) flat washers and (12) lock washers, these were installed on a PVC pipe flange and removed before the pipe was energized.
You are buying the actual item shown in the photo and described below: These are Brand New Anchor Bolts. High Quality ITW Red Head Concrete Anchor Bolts 3/4" X 5-1/2", use 3/4" drill Pac
This item is: 60 LBS: Mixed Bolts Nuts & Washers Lot, Grade 5, Grade 8, Very good Mix of Types. I am estimating that 95% or better of these bolts/nuts/washers are brand new (just to be safe in case a few used ones made it into the mix). A good portion of this lot is grade 5, there is some grade 8 mixed in.
Alcoa / Marson Steel Back-Up Washers / Spacers Size '4' Round Quantity: 1,000 washers Back-up Washers (or spacers) are used when fastening soft materials or to compensate for oversize holes where access to both sides of the work is possible.
Bag of 100 pcs of Jergens black hardened setup or fixture washers. Great for use with socket head cap screws or anywhere a serious washer is needed. 13/64" I.d.
Up for bid, 4 large heavy washers. They look unused, just have minor surface wear from being unwrapped in the bottom of a box with other metal items. They are steel, measure 3-1/2 inches across outside edges, 1-3/4 inches across inside hole, and 1/8 inches thick.
I have a lot of 60 piece 2 1/2 inch flat washers up for bid. They are weathered, but still in good shape. The outside measurement is 2 1/2 " with a 1 " inside diameter.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
