angle bolt for sale, brand-new and used.

Specifications Working Load Limit: 1,350 LBS Image of Specifications for Machine Eye Bolt - Stainless Steel"A" = 3/8" "B" = 1-9/16" "C" = 1" "D" = 3/4" "E" = 11/16" Description Machine eye bolts are often referred to as lifting eye bolts since they are commonly used as a connection point in lifting systems. Shoulder machinery eyebolts should always be used for angled lifts, because the shoulder gives it greater strength.

Crosby, 3/4" x 2-1/4" HR-125UNC Swivel Hoist Ring, #1016931 RATED FOR 5000 LBS RFID EQUIPPED NEW STILL SEALED ****THE CROSBY GROUP ******* All components are alloy steel, Quenched and Tempered Rated a

42 frame 1 speed 1075 RPM All-angle mounting TEAO enclosure Diameter: 5"; HP: 1/4-1/6; Volts: 208-230; RPM: 1075; Speeds: 1; F/L Amps: 2.00; Efficiency: 65.0%; Shaft Diam.: 1/2"; Shaft Length: 3"; Rot.: Rev.; Bearing Type: Dbl-Sld Ball; Wt. Lbs.: 12.0; Capacitor to Match: G21-933; NEMA Frame: 42; Type: PSC; Phase: Single;

#header, #subheader, #leftpane, #rightpane, #showcase ul, #seo, ul.tablinks, #largeimage, #design, #customhtml, #descriptiontitle, #ImageID { display: none; } #showcase a { visibility: hidden; } #background { text-align: center; } #container { border: 1px solid #999; text-align: center; width: 770px; margin: 0px auto; } * html #container { width: 772

Aluminum Angle 3/4 x 3/4 x 24 in, 1/16 in thick Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed. They are slightly less than a 1/16 of an inch thick.

ebay money back policy applies Any machine shop own

This table was purchased a number of years ago for a project that did not take place. It was mounted one time and placed on the shelf. It has very little staining due to the packing grease.

Uryu UAN-701R-60C Torque Control Angle Nutrunner, Assembly Tool TORQUE CONTROL ANGLE NUTRUNNER (MECHANICAL-CUT) The New UAN-611R & UAN-701R series Torque Control Angle Nutrunners offer exceptional fastening performance in the areas of productivity, ergonomics, reliability and quality. Six Per formance Advantages 1. Instant shut-off providing increased accuracy and reduced reaction.

Uryu UAN-701R-30C Torque Control Angle Nutrunner, Assembly Tool TORQUE CONTROL ANGLE NUTRUNNER (MECHANICAL-CUT) The New UAN-611R & UAN-701R series Torque Control Angle Nutrunners offer exceptional fastening performance in the areas of productivity, ergonomics, reliability and quality. Six Per formance Advantages 1. Instant shut-off providing increased accuracy and reduced reaction.

Uryu UAN-611R-40C Torque Control Angle Nutrunner, Assembly Tool TORQUE CONTROL ANGLE NUTRUNNER (MECHANICAL-CUT) The New UAN-611R & UAN-701R series Torque Control Angle Nutrunners offer exceptional fastening performance in the areas of productivity, ergonomics, reliability and quality. Six Per formance Advantages 1. Instant shut-off providing increased accuracy and reduced reaction.

Uryu UAN-701R-40C Torque Control Angle Nutrunner, Assembly Tool TORQUE CONTROL ANGLE NUTRUNNER (MECHANICAL-CUT) The New UAN-611R & UAN-701R series Torque Control Angle Nutrunners offer exceptional fastening performance in the areas of productivity, ergonomics, reliability and quality. Six Per formance Advantages 1. Instant shut-off providing increased accuracy and reduced reaction.

Uryu UAN-611R-30C Torque Control Angle Nutrunner, Assembly Tool TORQUE CONTROL ANGLE NUTRUNNER (MECHANICAL-CUT) The New UAN-611R & UAN-701R series Torque Control Angle Nutrunners offer exceptional fastening performance in the areas of productivity, ergonomics, reliability and quality. Six Per formance Advantages 1. Instant shut-off providing increased accuracy and reduced reaction.

Untitled Document