+ Post new Ad
ANGLE PLATES CAST IRON SET OF (2) WITH T-SLOTS 18 X 36 X 18, US $1300 – Picture 0
ANGLE PLATES CAST IRON SET OF (2) WITH T-SLOTS 18 X 36 X 18, US $1300 – Picture 0

Angle Plates Cast Iron Set Of (2) With T-slots 18 X 36 X 18

US $1300

  • Wallingford, Connecticut, United States
  • May 30th
Open on mobile:
QR code
(2) CAST IRON T-SLOTTED ANGLE PLATES EACH PLATE IS: 18" WIDE 36" HIGH 18" DEEP 7 SLOTS, 5 1/2" ON CENTER FEEL FREE TO EMAIL LRBROWNCO@SBCGLOBAL.NET FEEL FREE TO CALL 203-265-5639

Directions

Similar products from Fittings & Plates

angle block, 4 1/4" h x 2 5/8" w x 3 3/8" l (approx 11/16" thick

angle block, 4 1/4" h x 2 5/8" w x 3 3/8" l (approx 11/16" thick

  • Elkhorn, Wisconsin, United States
  • May 30th
Machinist sin plate, 5 1/4" x 4" table

Machinist sin plate, 5 1/4" x 4" table

  • Elkhorn, Wisconsin, United States
  • May 30th
Interstate Precision Sine Plate 12" x 6" x 2-1/2"

Interstate Precision Sine Plate 12" x 6" x 2-1/2"

  • Venice, Florida, United States
  • May 30th
VTG. MACHINIST ANGLE BLOCK , 3" x 3" x 3 1/2"W

VTG. MACHINIST ANGLE BLOCK , 3" x 3" x 3 1/2"W

  • Berlin, Connecticut, United States
  • May 30th
Toggle Switch Cover-Up White Taymac Corp Standard Switch Plate MW 5070W

Toggle Switch Cover-Up White Taymac Corp Standard Switch Plate MW 5070W

  • San Antonio, Texas, United States
  • May 30th
SUBURBAN TOOLMAKERS SINE VISE SV-337-S1 STK5817

SUBURBAN TOOLMAKERS SINE VISE SV-337-S1 STK5817

  • Wadley, Alabama, United States
  • May 30th
PALMGREN , 6" x 6" TILTING MILLING , DRILLING TABLE

PALMGREN , 6" x 6" TILTING MILLING , DRILLING TABLE

  • Berlin, Connecticut, United States
  • May 30th
SOUTH BEND-LOGAN-ATLAS 1 1/2" x 8 TPI

SOUTH BEND-LOGAN-ATLAS 1 1/2" x 8 TPI

  • Portland, Maine, United States
  • May 30th
Hardinge Chart Thread Plate NEW ME 0006331

Hardinge Chart Thread Plate NEW ME 0006331

  • Los Angeles, California, United States
  • May 30th
HARDINGE SPEED INDICATOR PLATE and Dial 6.5x4 inches

HARDINGE SPEED INDICATOR PLATE and Dial 6.5x4 inches

  • Los Angeles, California, United States
  • May 30th
BISON 8240 Lathe Chuck Back Plate 10" NEW old Stock 8240-10-6 Made in Poland

BISON 8240 Lathe Chuck Back Plate 10" NEW old Stock 8240-10-6 Made in Poland

  • Stuart, Oklahoma, United States
  • May 30th
Bridgeport BP 12193540 R-8 Collet Screw Set

Bridgeport BP 12193540 R-8 Collet Screw Set

  • San Jose, United States
  • May 30th
HHIP 3900-1625 5C Horizontal/Vertical Angle Collet Fixture

HHIP 3900-1625 5C Horizontal/Vertical Angle Collet Fixture

  • USA, United States
  • May 30th
Six station Turret Top Plate Hardinge AHC

Six station Turret Top Plate Hardinge AHC

  • Peabody, Massachusetts, United States
  • May 30th
Starrett Jack Screw, Jack Only (Model No. 191A)

Starrett Jack Screw, Jack Only (Model No. 191A)

  • Littleton, Colorado, United States
  • May 30th
UNKNOWN MAKER 5C COLLET INDEXING-SPINNING FIXTURE

UNKNOWN MAKER 5C COLLET INDEXING-SPINNING FIXTURE

  • Hadley, Pennsylvania, United States
  • May 30th
MAGNETIC TRANSFER " V " BLOCK PARALLIETS

MAGNETIC TRANSFER " V " BLOCK PARALLIETS

  • Oldtown, Maryland, United States
  • May 29th
Machined Angle Plate - SKU# P 47556 DIMENSIONS: 3"x 3"x 3"

Machined Angle Plate - SKU# P 47556 DIMENSIONS: 3"x 3"x 3"

  • Birmingham, Alabama, United States
  • May 29th
MACHINIST TOOL MAKERS LATHE COMPOUND CROSSLIDE CROSS SLIDE

MACHINIST TOOL MAKERS LATHE COMPOUND CROSSLIDE CROSS SLIDE

  • Toms River, New Jersey, United States
  • May 29th
Starrett No 191 Jack Screw VINTAGE with original box USA

Starrett No 191 Jack Screw VINTAGE with original box USA

  • O'Fallon, Missouri, United States
  • May 29th

People who viewed this item also vieved

NEW MT1 LONG NOSE LIVE CENTER MORSE TAPER 1 MEDIUM DUTY LATHE LIVE CENTER

NEW MT1 LONG NOSE LIVE CENTER MORSE TAPER 1 MEDIUM DUTY LATHE LIVE CENTER

  • Diamond Bar, California, United States
  • Jan 30th
Lot of 2 Winter VM0797 Center

Lot of 2 Winter VM0797 Center

  • Peoria, Illinois, United States
  • Jan 30th
NEW 4.72" (120mm) MT4 Bull Nose Live Center Morse taper #4 BULL HEAD FOR LATHE

NEW 4.72" (120mm) MT4 Bull Nose Live Center Morse taper #4 BULL HEAD FOR LATHE

  • Diamond Bar, California, United States
  • Jan 30th
Hard Serrated Top Chuck Jaws Set OF 3, 2" wide 37/8" long Height 40MM Slot 21MM

Hard Serrated Top Chuck Jaws Set OF 3, 2" wide 37/8" long Height 40MM Slot 21MM

  • Milwaukee, Wisconsin, United States
  • Jan 30th
Jacobs Spindle Nose Chuck 91-C6 w/D1-6 Mount or D1-5 Adapter

Jacobs Spindle Nose Chuck 91-C6 w/D1-6 Mount or D1-5 Adapter

  • Cedar Rapids, Iowa, United States
  • Jan 30th
LATHE CAMS FOR SETTING SOFT CHUCK JAWS BORING SOFT JAWS RAM PRODUCTS

LATHE CAMS FOR SETTING SOFT CHUCK JAWS BORING SOFT JAWS RAM PRODUCTS

  • Jamestown, New York, United States
  • Jan 30th
Hargrave12" C-Clamp "400-Series" Drop-forged Steel ~ Model 412 (Single Clamp)

Hargrave12" C-Clamp "400-Series" Drop-forged Steel ~ Model 412 (Single Clamp)

  • Auburn, Washington, United States
  • Jan 30th
Woodworking Metalworking RC Aircraft Clamp Vise Carr Lane CL-550-HTC Workbench

Woodworking Metalworking RC Aircraft Clamp Vise Carr Lane CL-550-HTC Workbench

  • Yuma, Arizona, United States
  • Jan 30th
Slot Nut M12? Slot Nuts Clamping arbor nuts? about 40 pieces

Slot Nut M12? Slot Nuts Clamping arbor nuts? about 40 pieces

  • Berlin, Connecticut, United States
  • Jan 30th
GTC0906 3/4" Pipe Tap Collet Erickson Brand 1pc

GTC0906 3/4" Pipe Tap Collet Erickson Brand 1pc

  • Trenton, Michigan, United States
  • Jan 30th
100PG-0265 17/64 TG Style Collet Parlec Brand 1pc

100PG-0265 17/64 TG Style Collet Parlec Brand 1pc

  • Trenton, Michigan, United States
  • Jan 30th
A393.09-STC8-0563TH 9/16 Collet Sandvik Brand 1pc

A393.09-STC8-0563TH 9/16 Collet Sandvik Brand 1pc

  • Trenton, Michigan, United States
  • Jan 30th
WNX-SF-3/16 Cylindrical Body Cleco Fastener

WNX-SF-3/16 Cylindrical Body Cleco Fastener

  • Fort Worth, Texas, United States
  • Jan 30th
CAST IRON 17 1/2" x 9" TABLE EXTENSION

CAST IRON 17 1/2" x 9" TABLE EXTENSION

  • Baltimore, MD, United States
  • Jan 30th
Carr Lane 13BLRV Receiver Bushing NEW (Lot of 3)

Carr Lane 13BLRV Receiver Bushing NEW (Lot of 3)

  • Wilmington, Ohio, United States
  • Jan 30th
Quick Slide Drill Press Vise, 4 Inch Jaw Width, Pro-Series Quality

Quick Slide Drill Press Vise, 4 Inch Jaw Width, Pro-Series Quality

  • Chino, California, United States
  • Jan 30th
Coolant Pump Kit For Drilling Milling And Lathe Machine

Coolant Pump Kit For Drilling Milling And Lathe Machine

  • Columbus, Ohio, United States
  • Jan 30th
8x6x5" Precision Slotted Angle Plate Webbed All New Item # 3402-0309

8x6x5" Precision Slotted Angle Plate Webbed All New Item # 3402-0309

  • Carrollton, Ohio, United States
  • Jan 30th
2005 A.G.Davis 4 / 5 Axis Trunion Type Rotary Table - NEW COST APPROX.$100,000

2005 A.G.Davis 4 / 5 Axis Trunion Type Rotary Table - NEW COST APPROX.$100,000

  • Poway, California, United States
  • Feb 15th
HAAS 5C CONTROL BOX 7 PIN CNC MILL ROTARY TABLE 5C INDEXER WITH OPERATOR MANUAL

HAAS 5C CONTROL BOX 7 PIN CNC MILL ROTARY TABLE 5C INDEXER WITH OPERATOR MANUAL

  • Carpentersville, Illinois, United States
  • Feb 15th
Nikken CNC-200FA Rotary Table With Fanuc Servo A06B-0313-B001 #7000

Nikken CNC-200FA Rotary Table With Fanuc Servo A06B-0313-B001 #7000

  • Carpentersville, Illinois, United States
  • Feb 15th
Collet Chuck Split Sleeve Morse Taper Shank 1 USA Qty 2

Collet Chuck Split Sleeve Morse Taper Shank 1 USA Qty 2

  • Louisville, Kentucky, United States
  • Feb 17th
DA200 3/4" 7.1" Long Straight Shank Collet Chuck Craftsman USA TE200-0750

DA200 3/4" 7.1" Long Straight Shank Collet Chuck Craftsman USA TE200-0750

  • Los Angeles, California, United States
  • Feb 17th
Jacobs collet chuck, Monarch 10EE lathe, D1-3

Jacobs collet chuck, Monarch 10EE lathe, D1-3

  • Lewisville, Pennsylvania, United States
  • Feb 17th
Pair of VULCAN GOOSE NECK CLAMP NO. 78 FORGED USA HOLD DOWN and one Short

Pair of VULCAN GOOSE NECK CLAMP NO. 78 FORGED USA HOLD DOWN and one Short

  • New Haven, Michigan, United States
  • Feb 22nd
CMCTW Set of Four Steel Parallels in Fitted Case Toolmakers Machinists

CMCTW Set of Four Steel Parallels in Fitted Case Toolmakers Machinists

  • Claremont, California, United States
  • Feb 22nd
MAGNETIC GRINDING BLOCKS/ 123 BLOCKS/ MAGNA-LOCK TYPE CLAMPS

MAGNETIC GRINDING BLOCKS/ 123 BLOCKS/ MAGNA-LOCK TYPE CLAMPS

  • Wausau, Wisconsin, United States
  • Feb 22nd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies