Anritsu Mt8850a Bluetooth Test Set

US $1300

  • Southlake, Texas, United States
  • Jun 8th
  Anritsu MT8850A Bluetooth Test Set Description      The Anritsu MT8850A makes RF measurements on Bluetooth modules and Bluetooth  products, quickly and at low cost. All measurements are made in accordance  with the Bluetooth RF Test Specification. MT8850A establishes a Bluetooth  link with the EUT (Equipment Under Test) using standard signalling. MT8850A  is the Master, establishing the link by Paging the EUT. The EUT BT address  can be entered manually or through the GPIB port. If the EUT BT address is  not known, you can use Inquiry or read the address directly through the EUT  HCI interface (RS 232). Test Mode is then activated in the EUT and RF  measurements performed. When the EUT is in Test Mode, the MT8850A has  complete control over its operation. The EUT can be put into loopback or TX  test mode, frequency hopping can be disabled or the EUT sent to defined TX  and RX frequencies as required by the test specification. The MT8850A runs a  selected test script. A test script comprises of all (or a user selected  subset) of the available RF measurements. The user can modify the  measurements by editing test frequencies, number of bits/packets tested,  hopping On or Off, whitening On or Off, and Pass/Fail limits. Pre programmed  "qualification" and "quick test" scripts plus user-defined scripts. Script  results can be viewed on the screen and accessed over the GPIB. In addition  any individual measurement can be run continuously     Unit is Very Good condition, Fully Tested and come with 14 Day ROR  90 Day Warranty! UNIVERSITY and Corporate P.O.'s Welcome!!  

Directions

Similar products from High Voltage Generators for Automation, Project Boards & Batteries

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies