+ Post new Ad
Antique Leblonde Horizontal Vertical Milling Machine Pwr Fd 220v 1ph 11"x34" 1B, US $4500 – Picture 0
Antique Leblonde Horizontal Vertical Milling Machine Pwr Fd 220v 1ph 11"x34" 1B, US $4500 – Picture 0

Antique Leblonde Horizontal Vertical Milling Machine Pwr Fd 220v 1ph 11"x34" 1b

US $4500

  • Millstadt, Illinois, United States
  • Oct 29th
Open on mobile:
QR code
Used Leblonde milling machine with 11"x34" table Knee type  220v 1ph spindle motor and a 110 volt for the power feed.  Mill has horizontal spindle as well.  This machine was originally line shaft powered but was change along the way to vertical and the power feed was reworked removing the original ate pulley and one gear.  Now horiz spindle is one speed and power feed is 8 speeds.  It has nice large hand wheels but no dials on the X as handle have been change at some point. There is one crack in side of column which shouldn't pose any problems. Power feed has flat belt drive. The ways have dinges and some scratches and are in average condition for its age.  Backlash is almost none in the X as nut is new and 1/8 turn in the Y. This mill runs fine, power Feed on the table has 8 speeds and works fine. Table has  a few mill and drill marks. Aftermarket vintage Rusnok vertical head 1/2 hp with BS9 taper one toolholder 1/2".  It is a model 1B first one I have ever seen. This machine can be picked up from my shop which is 10 miles south and east of downtown Saint Louis, Missouri, forklift loading is free. Email me for a shipping quote. Machine will be ready for pickup almost anytime, if crating is required it will take at least 2 days to prep. Please check out my other auctions. Thanks for looking. This machine is for sale locally, so the auction may be cancelled due to a local sale. Please read our feedback, 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction. Items are described as accurately and honestly as I can but are sold as is unless otherwise specified, so please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days ... buyer will be charged $10 per week there-after for storage unless prior arrangements are made.

Directions

Similar products from Tools for Milling Machines

INGERSOLL INDEXABLE FACE MILL 2J1E-40R01 K-3044981-D STK 10373Z

INGERSOLL INDEXABLE FACE MILL 2J1E-40R01 K-3044981-D STK 10373Z

  • Wadley, Alabama, United States
  • Oct 30th
ISCAR HELIDO INDEXABLE FACE MILL MF FVX 01.50-05-0.50-05 STK 10372Z

ISCAR HELIDO INDEXABLE FACE MILL MF FVX 01.50-05-0.50-05 STK 10372Z

  • Wadley, Alabama, United States
  • Oct 30th
Gamet Chuck Cylinder (29269)

Gamet Chuck Cylinder (29269)

  • Cincinnati, Ohio, United States
  • Oct 30th
GORTON MODEL 9J VERTICAL MILLING MACHINE MOTORIZED BED LOW HOURS 2 AXIS-US NAVY

GORTON MODEL 9J VERTICAL MILLING MACHINE MOTORIZED BED LOW HOURS 2 AXIS-US NAVY

  • Wilkes-Barre, Pennsylvania, United States
  • Oct 29th
B&S milling machine with Bridgeport head Brown & Sharpe 1953

B&S milling machine with Bridgeport head Brown & Sharpe 1953

  • Steele, Alabama, United States
  • Oct 29th
Milling cutter face mill Ultra-Mill UT3731

Milling cutter face mill Ultra-Mill UT3731

  • Hayward, Wisconsin, United States
  • Oct 29th
PRECISION COMPONENTS END MILL EXTENSION LRX-.750-9 STK 10337Z

PRECISION COMPONENTS END MILL EXTENSION LRX-.750-9 STK 10337Z

  • Wadley, Alabama, United States
  • Oct 29th
Ultra Mill UT3731

Ultra Mill UT3731

  • Hayward, Wisconsin, United States
  • Oct 29th
Ex-Cell-O Mill with Centroid 3 Axis CNC

Ex-Cell-O Mill with Centroid 3 Axis CNC

  • Culver, Indiana, United States
  • Oct 29th
ETM NMTB 50 3/8" END MILL HOLDER STK 7780

ETM NMTB 50 3/8" END MILL HOLDER STK 7780

  • Wadley, Alabama, United States
  • Oct 29th
BEAVER TOOLS NMTB 50 1-1/4" END MILL HOLDER STK 7777

BEAVER TOOLS NMTB 50 1-1/4" END MILL HOLDER STK 7777

  • Wadley, Alabama, United States
  • Oct 28th
NMTB 50 1/2" END MILL HOLDER STK 7779

NMTB 50 1/2" END MILL HOLDER STK 7779

  • Wadley, Alabama, United States
  • Oct 28th
Bridgeport Milling Machine 2 HP, 3 Phase 220/440, Vari Speed, 42" Table

Bridgeport Milling Machine 2 HP, 3 Phase 220/440, Vari Speed, 42" Table

  • Plainville, Connecticut, United States
  • Oct 28th
Bridgeport Milling Machine Table Shaft

Bridgeport Milling Machine Table Shaft

  • Staten Island, New York, United States
  • Oct 28th
PRECISION COMPONENTS END MILL EXTENSION LRM-.250-40-3 STK 10261Z

PRECISION COMPONENTS END MILL EXTENSION LRM-.250-40-3 STK 10261Z

  • Wadley, Alabama, United States
  • Oct 28th
2 MOON #204 KEYSEAT CUTTERS CKY350 M42 STK 9301

2 MOON #204 KEYSEAT CUTTERS CKY350 M42 STK 9301

  • Wadley, Alabama, United States
  • Oct 28th
PRECISION COMPONENTS END MILL EXTENSION LRX-.500-5 STK 10251Z

PRECISION COMPONENTS END MILL EXTENSION LRX-.500-5 STK 10251Z

  • Wadley, Alabama, United States
  • Oct 28th
ISCAR 3 Flute, 45° Helix, Medium Length, Solid Carbide Endmill, ISCAR-5622188

ISCAR 3 Flute, 45° Helix, Medium Length, Solid Carbide Endmill, ISCAR-5622188

  • Wichita, Kansas, United States
  • Oct 27th
PRECISION COMPONETS END MILL EXTENSION LRM-.500-55-1 STK10777Z

PRECISION COMPONETS END MILL EXTENSION LRM-.500-55-1 STK10777Z

  • Wadley, Alabama, United States
  • Oct 27th
INGERSOLL 5/8 BALL NOSE INDEXABLE INSERT END MILL 5/8 SHANK LOC1243

INGERSOLL 5/8 BALL NOSE INDEXABLE INSERT END MILL 5/8 SHANK LOC1243

  • Sidney, Ohio, United States
  • Oct 27th

People who viewed this item also vieved

Hardinge collet stop

Hardinge collet stop

  • Burton, Ohio, United States
  • Jan 30th
LARGE DIE HEAD COULD BE H&G OR GEOMETRIC NO MARKINGS ON HEAD

LARGE DIE HEAD COULD BE H&G OR GEOMETRIC NO MARKINGS ON HEAD

  • Cheshire, Connecticut, United States
  • Jan 30th
DIE HEAD COULD BE H&G OR GEOMETRIC NO MARKINGS ON HEAD

DIE HEAD COULD BE H&G OR GEOMETRIC NO MARKINGS ON HEAD

  • Cheshire, Connecticut, United States
  • Jan 30th
Set of 5 US Made Chucking Reamers

Set of 5 US Made Chucking Reamers

  • Leland, Illinois, United States
  • Jan 30th
Power Feed Unit For 20" Clausing Drill Press

Power Feed Unit For 20" Clausing Drill Press

  • Kalamazoo, Michigan, United States
  • Jan 30th
33.5" Arm 8.25" Column Sharp RD-820 RADIAL DRILL, 3 HP, #4MT, Power Elevation &

33.5" Arm 8.25" Column Sharp RD-820 RADIAL DRILL, 3 HP, #4MT, Power Elevation &

  • Harrison, New Jersey, United States
  • Jan 30th
Ebbco Package Filter System, Wire EDM

Ebbco Package Filter System, Wire EDM

  • Troy, New York, United States
  • Jan 30th
NEW ROSEMOUNT 01151-0211-0002 FITTING ADAPTOR FOR PRESSURE TRANSMITTER

NEW ROSEMOUNT 01151-0211-0002 FITTING ADAPTOR FOR PRESSURE TRANSMITTER

  • Milton Freewater, Oregon, United States
  • Jan 30th
2004482260 Charmilles Roller for Charmilles edm wire cut machine

2004482260 Charmilles Roller for Charmilles edm wire cut machine

  • ??, ???, China
  • Jan 30th
PRESS BRAKE DIE TOOLING - 2-WAY DIE 5.25" SQUARE 12" LONG

PRESS BRAKE DIE TOOLING - 2-WAY DIE 5.25" SQUARE 12" LONG

  • Chicago, Illinois, United States
  • Jan 30th
PRESS BRAKE DIE TOOLING - 4-WAY DIE 3.75" SQUARE 11" LONG

PRESS BRAKE DIE TOOLING - 4-WAY DIE 3.75" SQUARE 11" LONG

  • Chicago, Illinois, United States
  • Jan 30th
PRESS BRAKE DIE TOOLING - IRON WORKER - 85° DIE 4" OPEN 7" LONG

PRESS BRAKE DIE TOOLING - IRON WORKER - 85° DIE 4" OPEN 7" LONG

  • Chicago, Illinois, United States
  • Jan 30th
SUNNEN HONE TRUING SLEEVE S-323

SUNNEN HONE TRUING SLEEVE S-323

  • Wadley, Alabama, United States
  • Jan 30th
2002 37" AEM/TIMESAVER 500 SERIES TWO HEAD BELT GRINDING/FINISHING MACHINE

2002 37" AEM/TIMESAVER 500 SERIES TWO HEAD BELT GRINDING/FINISHING MACHINE

  • Harrison, New Jersey, United States
  • Jan 30th
2006 37" TIMESAVER "3100 SERIES" BELT GRINDER/BRUSH WET FINISHING MACHINE

2006 37" TIMESAVER "3100 SERIES" BELT GRINDER/BRUSH WET FINISHING MACHINE

  • Harrison, New Jersey, United States
  • Jan 30th
1978 BLANCHARD MODEL: 20CK-36" ROTARY SURFACE GRINDER, w/HIGH COLUMN

1978 BLANCHARD MODEL: 20CK-36" ROTARY SURFACE GRINDER, w/HIGH COLUMN

  • Harrison, New Jersey, United States
  • Jan 30th
10" Swg 20" cc Landis 1R OD GRINDER, HYD. Tbl, AUTO PLUNGE, RAPID, SPARKOUT TIME

10" Swg 20" cc Landis 1R OD GRINDER, HYD. Tbl, AUTO PLUNGE, RAPID, SPARKOUT TIME

  • Harrison, New Jersey, United States
  • Jan 30th
14" Swg 40" cc Brown & Sharpe 1440U OD GRINDER, HYD. Tbl, AUTO INFEED, DOUBLE SW

14" Swg 40" cc Brown & Sharpe 1440U OD GRINDER, HYD. Tbl, AUTO INFEED, DOUBLE SW

  • Harrison, New Jersey, United States
  • Jan 30th
CARBIDE INSERT ENGINE LATHE or MILL 1" x 7 1/2" BORING BAR tool holder 1/4" hss

CARBIDE INSERT ENGINE LATHE or MILL 1" x 7 1/2" BORING BAR tool holder 1/4" hss

  • Milroy, Indiana, United States
  • Jan 30th
ENGINE LATHE or MILL 3/4" x 11" BORING BAR tool holder 3/16" hss bit

ENGINE LATHE or MILL 3/4" x 11" BORING BAR tool holder 3/16" hss bit

  • Milroy, Indiana, United States
  • Jan 30th
TWO - 3 MORSE TAPER LIVE LATHE CENTERS engine metal holder tool mt STURDI-MATIC

TWO - 3 MORSE TAPER LIVE LATHE CENTERS engine metal holder tool mt STURDI-MATIC

  • Milroy, Indiana, United States
  • Jan 30th
2011 AJAX-TOCCO PACER-T 250 KW INDUCTION HEATER / GENERATOR, VERY LOW HOURS

2011 AJAX-TOCCO PACER-T 250 KW INDUCTION HEATER / GENERATOR, VERY LOW HOURS

  • Harrison, New Jersey, United States
  • Jan 30th
NICE 250 KVA ALPHIL SPOT WELDER w/ INTERLOCK INDUSTRIES MODEL iii 108 CONTROL

NICE 250 KVA ALPHIL SPOT WELDER w/ INTERLOCK INDUSTRIES MODEL iii 108 CONTROL

  • Harrison, New Jersey, United States
  • Jan 30th
2007 LNS QUICK SIX MAGAZINE BARFEED WITH 5/16" - 3-1/8" CAPACITY

2007 LNS QUICK SIX MAGAZINE BARFEED WITH 5/16" - 3-1/8" CAPACITY

  • Harrison, New Jersey, United States
  • Jan 30th
Dennison 6-Ton Multipress C-Frame Type Hydraulic Press - Used - AM10791

Dennison 6-Ton Multipress C-Frame Type Hydraulic Press - Used - AM10791

  • Cleveland, Ohio, United States
  • Jan 30th
DoAll Band Saw Wheel C80 Horizontal Bandsaw Machine Shop Tool New List $800

DoAll Band Saw Wheel C80 Horizontal Bandsaw Machine Shop Tool New List $800

  • Akron, Ohio, United States
  • Jan 30th
STARRETT 1-1/8 HOLE SAW 29mm VH0118 EDP55087 Bearcat

STARRETT 1-1/8 HOLE SAW 29mm VH0118 EDP55087 Bearcat

  • Hinsdale, Illinois, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies