Applied Montion Products Stac6-s-110 Stepper Motor Controller

US $249.00

Simi Valley, California, United States
Jan 29th

Open on mobile:
QR code

· The Item is being sold AS-IS but was removed from service in a working condition, but not tested since. I have 3 total of these, but this auction is for ONE only. The description below is from the manufactures website and is a current product. Currently Selling NEW for $800. FeFeatures: ThrThree pulse-based control modes: step & direction, A/B quadrature, CW/CCW pulse · Velocity (oscillator) control mode with sophisticated joystick operation · Streaming serial command mode (SCL) for commands sent from a host PC or PLC using RS-232 or RS- 485 serial communication · Multi-axis stored program mode (200 line capability) using SiNet Hub 8 or SiNet Hub 444 · 7 digital inputs, 3 digital outputs, all optically isolated · 2 analog inputs, +/-10 volt range · Stall detection and prevention with encoder feedback · Advanced anti-resonance algorithm · Torque ripple smoothing · Microstepping to 51,200 steps/rev · Idle current reduction The STAC6-S stepper drive is a powerful, two-phase, bipolar step motor drive for high-speed, high-torque applications. It employs sophisticated current control designed for optimal smoothness over a wide speed range. Anti-resonance, torque ripple smoothing, and microstepping work together to bring step motor performance to a new high. The STAC6-S operates on single-phase 120 VAC and outputs up to 6.0 A/phase (peak-of-sine) to the step motor. It features over-voltage, over-temperature, and over-current protection and is complemented by a specially matched set of low-loss NEMA 23 and NEMA 34 frame step motors. The STAC6-S can operate in the following control modes: pulse & direction, velocity (oscillator), and streaming serial (SCL) commands. It is also recommended for use with Applied Motion’s SiNet Hub 444 and SiNet Hub 8 multi-axis motion hubs. For connecting to external devices such as limit switches, proximity or photoelectric sensors, PLC I/O, lamps, and other devices, the STAC6-S stepper drive comes with 7 digital inputs, 3 digital outputs, and 2 single-ended analog inputs (analog inputs can be wired together as 1 differential analog input). The STAC6-S stepper drive comes with an RS-232 port for configuration and programming. It also provides an RS-485 port for streaming serial (SCL) and Q commands over serial networks with up to 32 axes. Each STAC6 drive comes with an encoder feedback connector for applications that demand a higher level of position control than ordinary open-loop step motor systems can provide. Use our double-shaft step motors with incremental encoders and activate either Stall Detection or Stall Prevention in the drive. Stall Detection notifies the system as soon as the required torque is too great for the motor, which results in a loss of synchronization between the rotor and stator, also known as stalling. Stall Prevention automatically adjusts motor speed to maintain synchronization of the rotor to the stator under all conditions. This unique feature allows step motors to operate in a much broader range of applications than previously possible, such as torque-control. The Stall Prevention feature also performs static position maintenance, which maintains the position of the motor shaft when at rest. Additionally, the inclusion of the optional encoder allows the motor to be precisely homed to the index (marker) pulse. The STAC6-S is UL Recognized (File No. E310506), CE approved, and RoHS compliant.

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	Applied Motion Products
MPN	5000-111
Model	STAC6-S
Country/Region of Manufacture	Unknown