Aqueous High Pressure Parts Washer Cabinet

US $3600

El Paso, Texas, United States
Jun 3rd

Open on mobile:
QR code

The Tempest™ Series of aqueous cabinet parts washers uses 600 psi of high-pressure aqueous cleaning solution power to scrub parts clean - no abrasives to damage precision machined parts. The ultimate in operator comfort, the Tempest™ 10/20S keeps the operator’s hands clean and out of cleaning solution. Operator simply slips hands into gloves and directs up to 600 psi fluid stream of heated cleaning detergent at parts. Fast heat-up, illuminated cabinet and window-clearing blower are standard on both units. Flexible neoprene gloves, safe and convenient air-actuated on/off foot pedal switch, and ergonomic working height maximize user comfort and result in increased efficiency. Adjustable hand-held spray nozzle can be set to a wide fan or pinpoint stream to direct cleaning power where needed. 150 mesh filter traps chips and solids and continuously filters fluid. · Up to 600 PSI and 180 GPH, 1 HP pump delivers cleaning power directly onto parts · 1,000 watt heater (Tempest™ 10) / 1,500 watt heater (Tempest™ 20S) provide heated (up to 115° F) aqueous fluid that cleans without grit · Window blower clears detergent and spray for parts viewing for efficient, accurate cleaning · Hinged front opening door allows full access to entire cleaning chamber · Variable output nozzle can be set from a wide fan to a pinpoint stream to allow operator to adjust cleaning force as needed · 36" W x 23" D x 23" H work chamber · 10 gallon solution reservoir; easy-to-change internal pail fits neatly below spray cabinet · Available in mild or stainless steel cabinet Optional Features: · Built in Air blow-off nozzle for parts drying (TEM-ABO) See Stainless steel model Motor Horsepower (HP) 1 Max. Parts Load (lb) 500 Spray Pressure (psi) 600 Operating Fluid Capacity (gal) 10 Electrical / Motor Information 115 V, 60 Hz, 1 Phase Heater Power (kW) 1000.00 Available Cleaning Action Brush (Optional)|Heated (Aqueous Only) (Standard)|High Pressure Spray (Standard) Available Cleaning Action Brush|Heated (Aqueous Only)|High Pressure Spray Call 866-540-7575 asive Media an up parts to prepare for multiple coating operations. You can also use it to create a blast-frost textured profile to surfaces (such as chrome or nickel plating) to maximize adhesion of any subsequent coating to be applied. This equipment is highly recommended for any general coatings business. 50 LB Abrasive Media