Authentic Efusion Dna 200 Box Mod By Lost Vape color Black Only*

US $560

Atlanta, Georgia, United States
Jun 19th

Open on mobile:
QR code

You will receive a ***BLACK***Authentic Efusion DNA 200 Box Mod by Lost Vape The Lost Vape EFusion DNA 200 builds upon the foundation of the Esquare and EPetite chassis, integrating the most advanced chip today in the Evolv DNA 200, a FullyMax 1300mAh 3 Cell LiPo (equivalent to a 3900mAh 3.7V) with a XT30 connector, and the precision and beautiful craftsmanship that Lost Vape has come to be known for. Manufactured out of 6061 T6 Aluminum, then anodized, the chassis of the EFusion maintains the replaceable and removable carbon fiber door paneling as well as the beloved form factor from previous models. Precision milled Stainless Steel buttons retain the ultra responsive and smooth feel, while maintaining the classic layout that offers easy to reach button placement alongside the 1A Micro USB Port. The EFusion features a XT30 LiPo connection, allowing users to service and switch out the pack (Please refer to EScribe documentation. Please note, removal and replacement of LiPo pack voids warranty and is ONLY intended for advanced users), while the integrated FullyMax 1300mAh 14.4 Watt Hour 11.1V 3 Cell LiPo provides top notch performance, stability, and has the equivalent battery life to a 3900mAh 3.7V cell. Loaded with a DNA200 chipset by Evolv, the EFusion has the incredible accuracy and capability that comes with the DNA 200, featuring 97% output efficiency, fully customizable output performance via EScribe, a 200W maximum output,full temperture control, and screen customization options. The combination of cutting edge output and a beautifully designed and manufactured chassis meet. Product Features: Removable and Replaceable Carbon Fiber Doors 6061 T6 Aluminum Chassis Anodized Precision Milled Stainless Steel Buttons Ultra Responsive and High Surface Stainless Steel 510 Connection Nickel Plated Brass Contact 1300mAh FullyMax 3 Cell LiPo 14.4W Hour 11.1V Equivalent to a 3900mAh 3.7V Cell XT30 Connection Allows for the removal and servicing of battery Please Note: Removal and servicing of existing battery will void warranty. This feature is intended for advanced users ONLY and requires additional diagnostic and set-up through EScribe. Product Specifications: 85mm by 60mm by 25mm DNA 200 Features: 1 to 200W Output Range 100W Kanthal Range (Able to be changed through Escribe) 200W Max Temperature Range 1 to 9V Output 0.1 to 2.0 ohm Kanthal Resistance Range 0.08 to 1.0 ohm Temperature Sensing Range Temperature Range 200 to 600 Degrees Fahrenheit Cell by Cell Monitoring Cell Balancer 1A USB Charger Atomizer, Weak Battery, Temperature, Resistance, Auto Power Down, and Heat Protection Escribe Configure and Modify the operation of the DNA 200 Autosensing Temperature Resistance Lock Mode Stealth Mode Power Lock Mode Power Preset Mode Resistance Lock Max Temperature Adjustment Efficiency 97% Output Current Continuous Max 50A Output Current Instantaneous Peak 55A Input Voltage 9 to 12.6V Input Current 0.5 to 23A Screen On Current 18mA Quiescent Current 4.5mA Power Down Current 5uA Current Owner's of the EFusion Should Follow the Following Steps to Ensure Maximum Performance! 1.) Download and Install EScribe via the link provided below (PC Only Currently). 2.) Start EScribe and Connect the EFusion to your PC 3.) When prompted, upgrade your Efusion to the latest firmware version. 4.) Navigate to the 'Mod' tab in Escribe. Verify that under 'Type', 'Lithium Polymer' is selected. 5.) Press 'Watt-Hour Calculator'. Confirm that you know the battery type installed. 6.) Change Value '720' to '1300' and Confirm. 7.) Confirm that 14.43 Watt Hours (Wh) is calculated, then click 'Yes' 8.)Your Lost Vape EFusion DNA 200 is now up to date!

Authentic Efusion Dna 200 Box Mod By Lost Vape **color Black Only***

Authentic Efusion Dna 200 Box Mod By Lost Vape color Black Only*