backflow ball valve for sale, brand-new and used.

NEW- Wilkins 975 XLUBV- 1 1/4 inch Backflow Device. RP ( NOT THE BACKFLOW VALVE PICTURED THIS ONE HAS UNION BALL VALVES ON BOTH ENDS ) Shipps To The Lower 48 States Only

New in box.850U Double Check Valve Assemblies with Union End Ball Valves are designed to prevent the backflow of pollutants that are objectionable but not toxic, from entering into the potable water supply. They feature a bronze body and union threaded ball valve end connections. Maximum Working Pressure: 175psi (12.1 bar).

NEW-USED... Wilkins 2 inch Ball Valve with 1/4 inch tap. This ball valve was salvaged off of a new, never installed Wilkins Backflow device.

Large lot of plumbing parts. 12 items well worth over $400 retail. 40 lbs of brass worth over $100 in scrap.

If you are local to Fort Worth, Tx, this item can be picked up as well. Message me for details! This is a brand new backflow preventer valve, never been used.

Used Wilkins 950XLT 2 inch DCV Backflow Preventer Wilkins Double Check Assemblies are backflow devices designed for installation on potable water lines to protect against both backsiphonage and backpressure of polluted water into the potable water supply. The Wilkins Double Check Assembly shall provide protection where a potential non-health hazard exists. New Price: $652.96

WATTS 909 LF 4" BACKFLOW PREVENTER WITH THE MANUAL NEW Description: Series 909 Reduced Pressure Zone Assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to back siphonage and or backpressure. It consists of FDA approved epoxy coated cast iron body construction with stainless steel trim, bronze ball valve shutoffs, and bronze test cocks.

LF007- Lead Free* 1" Double Check Valve Assemblies Description: Series LF007 Lead Free* Double Check Valve Assemblies prevent the backflow of contaminated water into the potable water supply. It consists of a Lead Free* cast copper silicon alloy (1/2 to 2 in) or fused epoxy coated cast iron (2 1/2 to 3 in) body construction that is easy to maintain and service. Ser

THIS AUCTION IS FOR A NEW CONBRACO 40-213-02

Apollo 71-500 Series Bronze Ball Valve, Two Piece, Inline, Spring-Close Lever, 1/2" NPT Female Connector Type: NPT Female | Item Length String: 2.25 inches | Number of Items: 1 | Part Number: 71-503-01 The Apollo 71-500 series two-piece inline ball valve is made of bronze and has a spring-close lever handle and female National Pipe Taper (NPT) threaded connections on both ends.

Apollo 70-600 Series Bronze Ball Valve, Two Piece, 3-Port Diverting, Lever, 3/4" NPT Female The Apollo 70-600 series two-piece three-port diverting ball valve is made of bronze and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass and has a zinc-plated steel lever handle with a vinyl sleeve for manual control.

Apollo 70-900 Series Bronze Ball Valve, Two Piece, 3-Port Diverting, Lever, 1" Solder End The Apollo 70-900 series bronze two-piece inline 3-port diverting ball valve has a lever handle and solder ends on all ends. The valve body is made of bronze for higher strength and corrosion resistance than brass. This valve has a zinc-plated steel lever handle with a vinyl sleeve for manual on/off control.

Apollo 75-100 Series Bronze Ball Valve, Two Piece, Inline, Lockable Lever, 1" NPT Female The Apollo 75-100 series two-piece inline ball valve is made of bronze and has a lockable lever-handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass.

NEW-USED.... Wilkins 2 inch Ball Valve. This ball valve was salvaged off on a NEW, never installed Wilkins Backflow Device.

New-Used.... Wilkins 1/14 inch ball valve. This ball valve was salvaged off of NEW, never installed Wilkins Backflow Device.

Apollo 71-500 Series Bronze Ball Valve, Two Piece, Inline, Spring-Close Lever, 1/2" NPT Female The Apollo 71-500 series two-piece inline ball valve is made of bronze and has a spring-close lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of bronze for higher strength and corrosion resistance than brass and has a stainless steel spring-close handle with a vinyl sleeve for manual on/off control.

The Apollo 72-100 series two piece inline high pressure ball valve is made of carbon steel and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made from carbon steel for greater strength and hardness than stainless steel and has a zinc phosphate coating for corrosion protection.

The Apollo series 76-100 two-piece inline ball valve is made of stainless steel and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This valve is made of stainless steel for resistance to corrosion and has a stainless steel 304 lever handle with a vinyl sleeve for manual on/off control.