What we have are Onan engine parts that are still in original packages. Parts include # 1-110-0902 Valve guide 1-110-0881 Valve 2-100-0880 Exhaust valve 1-302-0271 Meter 2-110-0902 Valve guide 2-101-0450 .020 Bearing 2-320-0540 Breaker 2-150-0694 Stud 1-214-0100 2brushes
This listing is for a new & genuine journal set of 0.010" undersize centre main bearings. Lister Petter part number 570-11171/010, suitable for LR2 SR2 SR3 SW2 SW3 engines. We also have them in standard size, 0.020" & 0.040" undersize.
**NEW** EVAPORATOR FAN MOTOR & BLADE Specs: 120V 60HZ .39A Impedance Protected End Play .010 min .060 max Rust Inhibitors: Varnish -Stator and Red Oxide-Rotor Oil: Omnilube 100 Deluxe Bearing System 2800 RPM .39A 24 Watts 120V Motor Measures 3.11" from back t
Lot Of 3 National Aperture MM-4M-Ex-50 Extended 50 Linear Travel Motorized Stages There are three stages configured in a 3 dimensional linear fashion. This unit was from a working demonstration used only a few times. Altho
The Starrett 25 Series Dial Indicator has a shockless, hardened steel gear train and jewel bearings. It is furnished with a lug-on-center back. Rugged and simple unit construction with a “universally fitting” design Sharp bezel serrations for positive grip Unbreakable crystal Hardened stainless steel stem No-glare satin finish on case Hardened stainless steel rack and spindle Massive bridge for rigid bearing support Hardened s
PLEASE NOTE this is a 30 FEET in length that is pulled out from the roll and then package in a static zip bag (see picture). Most people need only a small amount of solder instead of a whole roll and at fraction of the cost.
PLEASE NOTE the KESTER Solder wire is a 20 FEET in length that is pulled out from the roll and then package in an anti-static zip bag (see picture). Most people need only a small amount of solder instead of a whole roll (not included) an
Delta Rockwell Radial Arm Saw 14”16”18” Model No,33-400 Elevating Shaft Bearing Includes The Following Part Numbers: 424-040-17-0006 Elevating Shaft Bearing 901-0203-00-417 Flat Head Screw 902-010-40-1026 3/8-16 Hex Nut 904-02-020-1704 Lock Washer FOR THE FOLLOWING MODELS:
41 Pcs. Techniks Brand New 3mm to 26mm x 0.5mm ER 40 Precision Sealed Coolant Metric Collet Set. Techniks collets are Precision ground & hand inspected for close tolerance gurentee Features Larger plugs for 750 PSI coolant Use standard ER collet nuts Collapse Range: 0.010” Exclusive design reduces points of failure 50% Note: For coolant-thru tool applications.
35 Pcs. Techniks Brand New 3mm to 20mm x 0.5mm ER 32 Precision Sealed Coolant Metric Collet Set. Techniks collets are Precision ground & hand inspected for close tolerance gurentee Features Larger plugs for 750 PSI coolant Use standard ER collet nuts Collapse Range: 0.010” Exclusive design reduces points of failure 50% Note: For coolant-thru tool applications.
27 Pcs. Techniks Brand New 3mm to 16mm x 0.5mm ER 25 Precision Sealed Coolant Metric Collet Set. Techniks collets are Precision ground & hand inspected for close tolerance gurentee Features Larger plugs for 750 PSI coolant Use standard ER collet nuts Collapse Range: 0.010” Exclusive design reduces points of failure 50% Note: For coolant-thru tool applications.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
