SKF MB 5 Lockwasher, Steel, 25mm Bore, 1.25mm Thick Bore Diameter String: 25 mm | Item Thickness String: 1.25 mm This SKF MB or W series steel lock washer with interior and exterior tabs is suitable for use in locating a bearing on a shaft or adapter sleeve. The washer has an interior tab that locks into the shaft keyway and exterior tabs that lock the nut (sold separately) in position when one of the washer tabs is bent over into one of the slots around the circumference of the nut.
Machine frame for CNC milling machine or machining center Quality, made in Austria Included in delivery 1 machine frame according to Description . Including all axes , machine table , linear technology , ball screws etc. ...
We are selling a used SMC MXS25-20 Dual Rod Air Slide Table Cross Roller Guide w/stroke adjustment. It is used but clean and fully functional, perfect for saving money on your project. BORE 25mm STROKE 20mm From the SMC website: Applications that call for precise movement ranging from 10-150mm (1/2-6") typically require a cylinder and a precision guide. The MXS accomplishes this by integrating a cross roller bearing with a guide and two small air cylinders for compact force generation.
This is in used condition with some minor wear, working order. Model number MXS12-30. 12MM BORE 30MM STROKE Straight from the manufacturers website: Applications that call for precise movement ranging from 10-150mm (1/2-6") typically require a cylinder and a precision guide. The MXS accomplishes this by integrating a cross roller bearing with a guide and two small air cylinders for compact force generation.
This is from our inspection lab, used for Laser Interferometer. Consists of two(2) Newport Corp, Fountain Valley, CA linear stages - 425 crossed roller bearing type, includes Starret actuators, arranged as an XY Table. Stage 1 = X axis = 50mm travel, Stage 2 = Y axis = 25mm travel.
(2) ABS (Left and Right) Makerbot Replicator 2X Dual Extruder Upgrade - Delrin Plunger Replacement: We had serious problems using the delrin plunger system so we purchased a spring loaded extruder upgrade but still had a few problems with not having enough pressure from the spring to keep the plastic against the drive gear (slippage). This is a redesigned upgrade which uses a heavier and stiffer spring then what is normally used.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.