bearing bore for sale, brand-new and used.

Up for sale is a "NEW OLD STOCK" GE120 KRR-B RADIAL INSERT BALL BEARING. I recently purchased a lot of larger bushings, bearings, and bearing assemblies. They are all in great condition and they will all go up for auction.

SMC MGPL12-20Z cyl, compact guide, ball brg, MGP COMPACT GUIDE CYLINDER The new style MGP has a shorter guide rod and thinner plate resulting in a weight reduction of up to 17% over the original MGP.??The series is designed for high side load applications found in material handling, lifting and stopping. The?cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body.

Features: 50mm bore and 75mm stroke, double action and single rod, 1.0Mpa. Adjustable cushion on both cylinder end covers to make sure the cylinder works very smoothly, safly and with low noise. With self-lubricating bearing, the piston rod is lubrication free.

Features: 40mm bore and 75mm stroke, double action and single rod, Max Pressure1.0Mpa. Adjustable cushion on both cylinder end covers to make sure the cylinder works very smoothly, safly and with low noise. With self-lubricating bearing, the piston rod is lubrication free.

Features: 40mm bore and 75mm stroke, double action and single rod, 1.0Mpa. Adjustable cushion on both cylinder end covers to make sure the cylinder works very smoothly, safly and with low noise. With self-lubricating bearing, the piston rod is lubrication free.

Features: 40mm bore and 50mm stroke, double action and single rod, 1.0Mpa. Adjustable cushion on both cylinder end covers to make sure the cylinder works very smoothly, safly and with low noise. With self-lubricating bearing, the piston rod is lubrication free.

Features: 40mm bore and 25mm stroke, double action and single rod, 1.0Mpa. Adjustable cushion on both cylinder end covers to make sure the cylinder works very smoothly, safly and with low noise. With self-lubricating bearing, the piston rod is lubrication free.

This is for a very lightly used (cycled a few times to test) Bimba Pneumatic Slide, TBA-850-EM, Linear Bearing Slide, TWIN BORE AIR TABLE, 8mm Bore x 50mm Stroke Please look at all photos, as this is the actual item you will receive. Payment I accept PayPal only; please pay within 3 days of close or item will be relisted. Shipping Most items are packed and shipped within 24 hours after payment is received.

SquareTrade © AP6.0 2 TOL-O-MATIC 2 FINGER AIR GRIPPER W/SENSORS GPP100 This is a Fixed Auction for up to 2 Brand New Tol-O-Matic 2 Finger Air Gripper with sensors, Model # GPP100. PLEASE NOTE: Each Bid is for ONE Gr

Quantity 4 of CARRIER P461-2901 RUBBER CARTRIDGE BEARING BORE 1 3/16" O.D. 2 1/2" NEW IN UNOPENED BAG

BORE: 63CUSHION - HEAD: HMI cylinders incorporate the longest cushion sleeve and spear that can be accommodated within the standard envelope without reducing the rod bearing and piston bearing lengths.MOUNTING STYLE: Head Trunnion - A one-piece head and retainer is used on 100mm-200mm bore sizes – G1 dimension. On 160 and 200mm bores, the bolted gland is recessed, with tie rods screwed into the head.SERIES: HMIPORTS: "R" BSPT Parallel Thread (Standard) (Taper Thread): 3/4SPEC

Features: 63mm bore and 100mm stroke, double action and single rod, 0.1-9Mpa. Adjustable cushion on both cylinder end covers to make sure the cylinder works very smoothly, safly and with low noise. With self-lubricating bearing, the piston rod is lubrication free.

This is for up to 2 Pneumatic SMC Magnetic Rodless Cylinder Slider Type/Slide Bearing, Model #CDY1S15H-250 with 10"(250mm) of stroke and 15mm bore. Each bid is for ONE Slide With no external leakage, the CY series can be used in many diverse environments. Magnetically coupled cylinders have a wide range of applications, and save mounting space.

FABCO-AIR DOUBLE END 2" BORE 1/2" PANCAKE AIR CYLINDER B-321-X-U This is an Auction for a Double Acting Pneumatic Fabco-Air Pancake Air Cylinder, Model # B-321-X-U with 1/2" of stroke with a 3/4" piston - 2" Bore.

UP TO 2 HYDRO-LINE 2" STROKE AIR CYLINDERS 2" BORE R5R-2X2 B-.63-2-N-N-N-2-2-X This is an Auction for up to 2 Pneumatic Hydro-Line High Pressure Flange Mount Cylinders, Model R5R-2X2 B-.63-2-N-N-N-2-2-X. Each Bid is for ONE Cylinder. This cylinder has 2 Inches of Stroke, 2" Bore, overall length is 8 1/2", Piston measures .625" and up to 250 PSI.