belt driven exhaust fan for sale, brand-new and used.

Plans to build the PowerHouse 4-Cycle Gas Engine The "PowerHouse" engine is a long stroke design for medium to low speed operation. By having a long stroke, it is capable driving a load such as a generator or pump at a leisurely pace. It is made from bar stock and was designed to be as easy to build as possible while retaining good looks.

Please Call Eaton Compressor at 877-283-7614 or Email Us At megan@polarcompressor.com For A Lead Time

Please Call Us At 877-283-7614 or Email Us For A Lead Time This is our 15 HP, 3 Cylinder, 2-Stage, air compressor pump. The 15HP 3 Cylinder Pump will produce 35CFM if ran with a 10HP Motor at 600RPM.. This pump can go to 200 PSI, but what we tell all of our customers is even though the compressor will go to a higher pressure, you should run it at the lowest pressure possible to maintain the air pressure needed.

Please Call Eaton Compressor At 877-283-7614 Or Email Us At megan@polarcompressor.com For A Lead Time / Shipping Quote WE ACCEPT VISA, MASTERCARD, DISCOVER AND AMERICAN EXPRESS MODEL# APP

Please Call Eaton Compressor At 877-283-7614 Or Email Us At megan@polarcompressor.com For A Lead Time MODEL# APP2I0524T This is our 5 HP In-line, 2-Stage, air compressor pump with 24 CFM Displacement, 17 CFM @ 175 PSI, and 20 CFM @ 100 PSI. This unit has an SCFM @ 175 of 17. This is usable air or "free air" at pressure – 175 PSI.

This is a custom made "small parts" open front bench spray booth. This booth is in supurb condition and can be used for exhausting overspray from airbrush painting, spray adhesives, or other harmful fume products. Size: 27" x 20" opening / 15" x 20" x 1" filter / 1/4 HP motor (thermally protected) / 115 volts / 4.5 amps / 12" diameter belt driven tube axial fan / 8" exhaust / weight 130lbs.

Greenheck Centrifugal Downblast Exhaust Fan, Roof Mount, Belt Driven 1/4 HP. Never used or installed comes with power switch and Instructions. The top cover had some dents and some scratches.

Greenheck Centrifugal Upblast Exhaust Fan, Roof Mount, Belt Driven 1/4 HP, 23" Fan. Never installed comes with grease drain, power switch and Instructions. The top cover had a dent and some scratches.

48" Galvanized Fan and Housing with 2 HP 208-230/460 3 Phase ODP Motor, Belt Driven, All Pullys and Belts Included. In the Original Crate. This Fan was Bought for New Warehouse,Owner Decided to Use 2 Smaller Fans.

This is a custom made "small parts" open front bench spray booth. This booth is in superb condition and can be used for exhausting overspray from airbrush painting, spray adhesives, or other harmful fume products. Size : 27" x 20 opening / 15" x 20" x 1" filter / 1/4 HP motor (thermally protected) / 115 volts / 4.5 amps /12" diameter belt driven tube axial fan / 8" exhaust / weight 140 lbs.

Call or Email For Freight Quote / Lead Time **Paying Via Credit Card or PayPal Results In A 3% Handling Fee** APP3Y2062T 62CFM Air Compressor Pump Specifications: Solid cast iron 2-stage 3 Cylinder W design piston series pump, oil lubricated design to extend pump life, rated at up to 50,000 hours (based on B-10 bearing life rating) Ram-Tek - solid steel, heavy gauge rods, designed for ma

this is a 1/2 horsepower belt driven 6 bladed 36 inch exhaust fan used but in great working condition. these were used in chicken houses. most of these are set up at 230 volt can be converted to 115 volt.

this is a 1 horsepower belt driven 6 bladed 48 inch exhaust fan it is used. it is currently set at 230 volts can be switched to 115 volts. these were used in chicken houses they work great belts are in great condition.