belt sprocket for sale, brand-new and used.

German made, 16 tooth timing belt pulley with flanges, one inch bore shaft size, keyed 1/4" square keyway with set screw hole and screw, designed to work with H-100 timing belts. This is a quality drive pulley, we can cut keyway in these pulleys if required, we also offer these pulleys without the keyway and setscrew in our other listings, You can find drilled tapped pulleys with set screws in another listing.

German made, 14 tooth timing belt pulley with flanges, one inch bore, smooth shaft designed to work with H-100 timing belts. This is a quality drive pulley, we can cut keyway in these pulleys if required, we can also drill and tap for set screw hole, You can find drilled tapped pulleys with set screws in another listing. Free Priority mail shipping in USA, Foreign buyers are welcome, shipping will be calculated after sale and you will be invoiced for shipping prior to shipment.

Listing is for a QTY of 2 R Pitch: 0.0982 No. Of Teeth: 26 Bore: 3/16 Outside Diameter: 0.8750 Material: Aluminum Anodized (Color may vary) Type: BELT SPROCKET Style: PIN HUB Face: 3/16 Pitch: 0.8125 Hub Diameter: 0.625 Set Screw Location: 0.125

On vacation, will ship October 10thExtended Template Holder for Wirth Morticing, Tenoning, Duplicating Machine (Wirth Machine not included) For copying gunstocks, furniture legs and other shapes that can be held between centers. Will accommodate templates and stock up to 8" diameter and 48" long.Lockable at any angle, a timing belt and sprocket keep the template and workpiece in register. 52" by 9" by 14" Fully functional and ready to use.

UP FOR AUCTION IS THIS GOODYEAR SYNCHRONIOUS TIMING BELT GEAR #W-28S MPB WITHOUT ORIGINAL BOX. IT COMES STANDARD WITH A 1/2" BORE, READY TO USE PLEASE CHECK ALL THE PHOTOS AND JUDGE FOR YOURSELF.HAPPY BIDDING!!!!!

NEW (Except for the Box that we tore when moving) Martin Sprocket & Gear Sheave Product Specifications

German made, CAST IRON 80 tooth timing belt pulley, one inch bore shaft size, designed to work with H-100 timing belts. This is a quality drive pulley, it is NEW OLD STOCK and has light surface rust but is guaranteed to be mechanically excellent. The Center bore was changed from 25 MM by bore & sleeve to 1" bore, these are secured with a drive pin as seen in the photos.

Stainless new without box 1" taperlock

Sprocket Pulley TL18L075 1108 FB BORE for:1108 TAPER LOCK BUSHING BORE SIZE: N/A TEETH / BELT PITCH :.3750 IN. BELT WIDTH: .7500 IN. NUMBER OF TEETH: 18 Condition: New List Price = $24.43 Loc: 232L1 Part# 10200

Used 10 HP Rexnord/Link Belt Gearmotor with U.S. Motors 10hp 3ph electric drive motor. Rexnord/Link Belt, Electrofliud Gearmotor: Model 10DDFF-82 S/N M00-15658-A110 HP rating, Ratio is 16.66, 97 RPM output speed with 1750 RPM input.

Pulley / Sheave Reducer Sleeve to reduce a 3/4" Bore Pulley, gear, sprocket, wheels,etc. to fit a Small Gas Engine / Motor with a 1/2" Shaft with a 3/16" Keyway slot Length is 3"

Pulley / Sheave Reducer Sleeve to reduce a 3/4" Bore Pulley, gear, sprocket, wheels,etc. to fit a Motor with a 15mm Shaft with a 3/16" Keyway slot

Shaft Adapter Pulley / Sheave Bore Reducer Sleeve to reduce a 5/16 Bore Pulley, gear, sprocket, wheels,etc. to fit a Motor with a 1/4" Shaft

(2) HYTROL (1) 10’x24” & (1) 5’x24” conveyors Model 138-ACC, S#180878. Both conveyors attached together are 15’ long. Rollers are about 1 3/8” diameter x 21” long.

This item is new without original packaging, opened for inspection by our QC department. Item is guaranteed non-DOA and covered under our 14-day return policy. Item comes to you exactly as pictured - nothing more, nothing less.

Conveyor drive motor RH side for full belt conveyor. As shown with sprocket and bolts. Wire connector plugin end.

Pulley / Sheave Reducer Sleeve to reduce a 5/8" Bore Pulley sprocket wheel to fit a Motor with a 9/16" Shaft with a 3/16"

German made, CAST IRON 120 tooth timing belt pulley, one inch bore shaft size, designed to work with H-100 timing belts. This is a quality drive pulley. It has a second 1" diameter hole in one spoke as shown exactly 4" offset from the center bore.