Bendix King V Series APCO P25 Base Station/Repeater, ICOM, Relm, Westel DRB-25, US $2,999.00 – Picture 0

Bendix King V Series APCO P25 Base Station/Repeater, ICOM, Relm, Westel DRB-25, US $2,999.00 – Picture 1

Bendix King V Series APCO P25 Base Station/Repeater, ICOM, Relm, Westel DRB-25, US $2,999.00 – Picture 2

Bendix King V Series APCO P25 Base Station/Repeater, ICOM, Relm, Westel DRB-25, US $2,999.00 – Picture 3

Bendix King V Series APCO P25 Base Station/Repeater, ICOM, Relm, Westel DRB-25, US $2,999.00 – Picture 4

Bendix King V Series APCO P25 Base Station/Repeater, ICOM, Relm, Westel DRB-25, US $2,999.00 – Picture 5

Bendix King V Series Apco P25 Base Station/repeater, Icom, Relm, Westel Drb-25

US $2,999.00

Pasadena, Maryland, United States
Jan 29th

Open on mobile:
QR code

Brand New in Factory Boxes Removed from boxes to test for proper operation on the programmed test frequencies Check with programming software. Presently programmed with test frequencies 100 Watt Base Station/Repeater capable of APCO P25 (standard) and analog conventional operation as a Base Station and Repeater VHF 136 to 174 MHz Modules Included: 0.5 PPM Controller VHF Transceiver 136 - 174 MHz VHF Power Amplifier, 100 Watts, 136 - 174 MHz Power Supply Interface Module (rear panel) Expandable to a dual repeater or repeater with RF link by adding additional modules. See Feature Summary below RF Connections: N-Female No Duplexer This repeater has been labeled and sold by Bendix King as V Series, ICOM DRB-25, Relm V Series, and ADI DMR-Zoneva...Also E.F. Johnson Model 5600. This particular repeater is labeled BK Radio manufactured by Westel Wireless. Includes Programming Software (Windows XP) and Serial Cable Installation and Operator Manual (144 pages) included as PDF on CD. The DRB-25 supports simultaneous analog and digital P25 operation. VHF (136 - 174 MHz) frequency band. 100 W (VHF) RF output. Configurable as single or dual channel with any mix of frequency bands, channel modes and output powers by adding additional modules. 512 programmable channels per radio, with each channel programmable as Project 25 digital or TIA / EIA 603 analog. Programmable channel scan of up to eight channels. Optional RS232, Ethernet and general purpose I/O interfaces. Optional 2-wire or 4-wire+E&M wireline interfaces for remote control or telephone interconnect. Compatible with industry standard tone remote control consoles. User-friendly configuration and diagnostic software for local or remote configuration (for use under Windows 3.1, Windows 95 or Windows NT 4.0 and Windows XP). Self-test diagnostic routines. 110 VAC and 12 VDC operation. Desktop configuration Special shipping notes: Unit will be shipped in at least 2 boxes. The radio cabinet will be shipped separately from the modules. Unit can be shipped internationally in multiple shipments to keep under weight limits. Please message me for full shipping estimate I am willing to work with all prospective buyers to achieve the most agreeable shipping arrangements. I am open to any reasonable offers from Ebay buyers with a good buying history. Payment is expected within 3 days after acceptance of offer unless I accept a prior agreement. I accept Credit Cards (Visa, Master Card, Discover) Key Features (from the ICOM Literature) Built-in P25 IMBE vocoding and P25 OFB DES encryption Simultaneous operation and linking DIGITAL and ANALOG Simultaneous operation and linking VHF and UHF Base station/repeater operating modes Direct connection to existing tone remote and console systems, PSTN and microwave links Multiple call types (including individual calls and group calls) IP-enabled providing VoIP and Web-based real-time control and user, Web-diagnostic, monitoring and alarm information using corporate intranets and public internets Easy programming via Windows® P25 Digital and Analog Interoperability, All in One Box. The DRB-25 is a compact base station/repeater unit, fully compatible with the APCO Project 25 (P25) standard of secure digital radio. Its high power, features and flexibility make it an ideal building block for conventional radio networks. The DRB-25 supports simultaneous analog and digital P25 operation. Its crossband feature permits communication across different bands as well, making the DRB-25 a highly cost effective migration to digital radio. Applications The DRB-25’s modular design and software based features make it an extremely flexible building block for a wide range of network applications. The DRB-25 can operate in a stand-alone mode or within a conventional network using remote repeaters. Its compatibility with P25 means that it is ideal for use by public safety organizations requiring a high level of security and interoperability, as well as public utilities (such as power companies) and transport organizations (such as railways). Available in both VHF and UHF bands the DRB-25 can easily be implemented in a wide range of situations. Interconnection to the PSTN or a microwave bearer is available through a standard 2-wire or 4-wire + E&M interface. The DRB-25’s compact dual radio configuration is a very cost effective solution for remote locations. One channel can be used as a base station or repeater for general communications, while the second channel acts as a link to other base stations or repeaters. Fully Software Controlled The DRB-25’s modular design means there’s no field tuning, adjustments, or alignments necessary. Once the unit is set to your specifications, any future changes are a simple hot-swap of the appropriate module. Built-in PC Web Server Control / monitor your system remotely via a built-in ethernet port. Watch critical user info, analyze system activity, transmit, receive, perform diagnostics, monitor NAC activity, change channels, view signal levels, and more, all from a PC Web browser Linking Flexibility The DRB-25 may be configured with one or two independent channels. Each channel may operate as an analog and/or a P25 digital repeater or may also be programmed to autosense the mode of a received signal and thus be shared between analog and digital users. With built-in P25 vocoding and DES encryption the DRB-25 may be connected directly to existing tone-based remote and console equipment using 2W and 4W E/M circuits. Direct connection to 2W telephone lines for analog and P25 digital calls is also supported. “IP enabled” connection to corporate intranets and public internets and providing VoIP and control, monitoring and diagnostics through and built-in Web server. Link Different Modes Applicable during a migration to digital operation or for interoperablity or to provide interoperability between analog and digital users operating in the same geographic area. The users may be operating in different frequency bands. Link Wide Areas Two DRB-25s each configured with 2 channels may be used in either analog or digital mode to provide coverage over a wider area. The coverage and linking channels may use different bands. The DRB-25s are transparent to CTSS/CDCSS and P25 signaling.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Westel/Bendix King, ICOM
Country/Region of Manufacture	Australia
Model	DRB-25 APCO P25 BK V Series
Frequency Range	136 - 174 MHz