blower heat for sale, brand-new and used.

This oven was in a pizza parlor we purchased. We have never used it to make pizza but we did make sure it ran before we took it out of the shop. It is a 1991 unit.

Wonderful ovens we've been using in our busiest store for the last ten+ years. Works like new with almost $1000 in extra parts including: brand new blower motor, conveyor motor,

Inducer motor assembly with the blower wheel and housing. You get everything pictured, the complete assembly that was in service until a month ago before the furnace was replaced. This will fit the older style Bryant & Carrier Weathermaker high 90+ and +90i variable speed models used in the intelligent models.

Tjernlund Level to Level Aireshare Fan-75 CFM #ASLL Brand new in original packaging. Item Weight: 12.00 lb(s) Product Information: Install this ultra-quiet 75 CFM cross flow blower to move heat from stoves and fireplaces to warm other levels of your house. U.S.A.

Motor has been tested and in good working order. It has been pulled from a working furnace with a failed heat exchanger. All wiring is in good shape and will provide capacitor with shipment.

70/30 Split Electric Conveyor OvenMfg: Turbo Chef Model: HHC2020ED-1909 The High h Conveyor 2020 offers high heat transfer rates for accelerated cooking, a small enough footprint to fit virtually any appication, and does not require the energy consumption and higher HVAC needs of a larger oven. Split belt technology offers you the option to cook two separate food items at once, as the split conveyor can run at the same speed or different speeds depending on the food items your preparing.

Sweet Pizza Oven! $7,000 firm 24" Deck = medium capacity stays cool to the touch on top. Laser activated conveyor, oven goes into power save mode but maintains heat High speed, pizza passes through in about five minutes for specs check out PS636g on Middleby's website purchased in 2012 brand new for $18,000Shop Closed down after 6 months of operationsitting in storage.

YOU ARE BIDDING ON A LEISTER CH-6060 HOT AIR BLOWER HEAT GUN TRIAC-S PLASTIC WELDER. SHOWS SIGNS OF NORMAL USAGE.

Lenk Corp LSP-60K Butane Soldering Iron Kit 30-70 Watt Range Blow Molded Case Soldering Hot Knife Blow Torch Heat Blower See Photos Please ask any questions before Bidding

I am selling a used machine that is great shape, recently serviced by PP authorized service company. Includes manual, and casters. Does not have a plug.

Simple, reliable, and hard-working...that’s the Shanklin high-performance proven shrink tunnel. Rugged, Reliable Compact Performer The Shanklin Model T-6HC Shrink Tunnel is similar to Model T-6XL, except that the opening height is 3" higher (10") to accommodate higher pro

Free Shipping! Sequencer RHEEM RUUD part #42-23116-01 Technical Data: Mounting: Angle Bracket w/Two Mounting Holes Heater Wattage/ Power Consumption: 24 VAC / 0.2A steady state / 0.55A maximum Heater Voltage (V): 24 Contact Configuration: DPST - NO No. of Poles: 2 On Timing - Pole 1 (seconds): 10-30 On Timing - Pole 2 (seconds): 10-30 Off Timing - Pole 1 (seconds): 30-60 Off Timing - Pole 2 (seconds): 30-60 Connections: 1/4 in.

Sequencing Relay 42-23116-09 Technical Data: Mounting: Angle Bracket w/Two Mounting Holes Heater Wattage/ Power Consumption: 24 VAC / 0.2A steady state / 0.55A maximum Heater Voltage (V): 24 Contact Configuration: TPST - NO No. of Poles: 3 On Timing - Pole 1 (seconds): 10-30 On Timing - Pole 2 (seconds): 10-30 On Timing - Pole 3 (seconds): 10-30 Off Timing - Pole 1 (seconds): 30-60 Off Timing - Pole 2 (sec

Relay - SPDT (24VAC coil) 42-25104-06 Technical Data: Contact Configuration: SPDT Contact Bias: NO / NC Coil Voltage (VAC): 24 Coil Frequency (Hz): 50/60 FLA at 120V (A): 14 FLA at 230V (A): 8 LRA at 120V (A): 84 LRA at 230V (A): 48 Resistive Rating at 277V (A): 25 Terminal Connections: 1/4 in.Quick Connects Where Used: Model: Part: Page: SSNJ 42-101208-01 Electrical Group, Fan Group S