Blowers & Ventilators (Heating, Ventilating & Air Conditioning Parts) for sale, page 137

65106 115v 3000 rpm vent fan motor for nutone c68627, gemline em555, supco sm555

Plainview, New York, United States
Apr 22nd

THIS IS AN AFTERMARKET ITEM NOT OEMPACKARD 65106 Packard C-Frame Motor 115 Volts 3000 RPM Features

Fasco 7002-2633 furnace draft inducer blower motor assembly 1010975

Atascadero, California, United States
Mar 29th

FASCO 7002-2633 Furnace Draft Inducer Blower Motor Assembly 1010975 ALL PARTS ARE PROFESSIONALLY REMOVED, TESTED WORKING, CLEAN & READY TO USE MANY OTHER LOTS GOING UP THIS WEEK SO FOLLOW ME AS A SELLER AND CHECK BACK OFTEN BULK BUYS AVAILABLE FOR LOCAL PICKUP IN CEN

Dayton exhaust fan model 4yc95

Fort Wayne, Indiana, United States
Mar 29th

Dayton 81858 1/4 HP 115 Volts 1 PH22" square Fan 18" approx weight 23 lb Contact us at 260-747-6650 This listing is for 1 Fan. There are 3 Available &nbs

A.o. smith 326p404 motor

Albany, New York, United States
Mar 29th

rpm 1420 132 1150 hp 1/8 hzz60 5202-00023 -001 10 mfd/370v tested shafted 5 inch 2inch 1/2

La 11aa 005 carrier blower wheel, 4" dia., for gas furnace inducer

Waveland, Indiana, United States
Mar 29th

LA 11AA 005 Carrier Blower Wheel (for "plus-80" gas furnaces) - steel - new & unused - in original box

York blower wheel s1-02625529701

Hobart, Indiana, United States
Mar 29th

New mint sealed in factory box. is a steel blower wheel. Sixteen pounds in the box.

Patterson industrial high velocity fan 24" od. yoke mount included

Queen Anne, Maryland, United States
Mar 29th

As seen in the pictures this is a used but Very Nice Patterson barrel type fan. This fan is an industrial fan so will work well in large areas such as a warehouse or any open area. As seen in the pictures it comes with a yoke mount bracket.

New revcor fan blower wheel 1/2" id 7 7/16" od 3 3/8" width

Clover, South Carolina, United States
Mar 28th

REVCOR FAN BLOWER WHEEL 1/2" ID 7 /716" OD 3 3/8" WIDTH

Lau blower wheel 01332601 10 5/8x6x1/2 cw convex

Hollis Center, Maine, United States
Mar 28th

This is a new replacement blower wheel manufactured by Lau industries. I purchased it for my HVAC system but needed the CCW version (50/50 90 rule) so this was never used. It's possible to reverse the rotation if there is enough room in your blower housing and/or motor shaft to flip it from convex to concave.

Blower ametek/rotron 400 hz 115vac blower new

Endicott, New York, United States
Mar 28th

This is a NEW AMETEK/ROTRON 400 Hz single phase 115VAC blower. It requires a .1 uF capacitor. AS PICTURED If you win more than 1 item in less than 7 days, you can request an invoice from us.

Mars 10 by 9 direct-drive blower wheel

Kansas City, Missouri, United States
Mar 28th

Mars 10 by 9 direct-drive blower wheel. 50 bore CW concave 10.6 2 diameter by 9.5 width Free shipping in the lower 48 states

Exhaust fan for building

Maggie Valley, North Carolina, United States
Mar 28th

I bought this fan new for an exhaust system in a restaurant. It was never installed. I don't have any use for it.

Jabsco (xylem) 36760-0220 blower - flange mount - 200 cfm, 220 volt - new - !

Eugene, Oregon, United States
Mar 28th

This is a Jabsco (Xylem) 220 volt, 200 CFM blower.

Binks tubeaxial exhaust fan spray paint booth industrial commercial 3 hp motor

Bridgeton, New Jersey, United States
Mar 28th

I am selling a Binks model 30-4307 it's a 36 inch diameter exhaust fan from the paint booth comes with a 3 hp 3 phase Motor and belts I can strap this onto a pallet and ship it through a shipper of your choice such as The ones you find on uship

Fasco 8 " 1050 rpm 115v wood burner blower fan stove small furnace heater

Dundee, Ohio, United States
Mar 28th

YOU ARE Looking at A FASCO 115 VOLT 2.5 AMP 1050 RPM universal BLOWER WHEEL FAN HAS 9X8" SQUARE OUTLET MOUNTING FLANGE IS 11-1/2"X 10 1/2" ,HAS SHORT CORD WITH PLUG ATTACHED BLOWER USED TESTED AND RUNS OK GOOD FOR WOOD BURNER SMALLER FURNACE OR EXHAUST FAN Need more information or Something else , E mail , Thanks for looking."

Comair rotron mx2b3-028422 muffin-xl 115v-ac 120mm cooling fan d356600

Delta, Ohio, United States
Mar 28th

Tpi industrial workstation fan u18-te, 18" blade , 1/8 hp, wall mount

Coffeyville, Kansas, United States
Mar 27th

TPI INDUSTRIAL WORKSTATION FAN PART NUMBER: U18-TE MODEL NUMBER: D-RE-PSC-127/25-4P3SP-1/8 HP-A BLADE SIZE: 18" DIAMETER BLADE MATERIAL: ALUMINUM CONTROL TYPE: ON/OFF- 3 SPEED

Rheem ruud 62-24084-82 ignition control board

West Springfield, Massachusetts, United States
Mar 27th

Direct replacement control board for many Rheem, Ruud, and Weatherking Furnaces. Replaces 62-22694-01, 62-22694-02, 62-22694-03, 62-22694-11, 62-22694-12, 62-22694-82, 62-22694-83, 62-22694-91, 62-22737-06, 62-22737-07, 62-22737-08, 62-22737-10, 62-22737-87, 62-22737-88, 62-24044-01, 62-24044-81, 62-24044-91, 62-24045-01, 62-24046-01, 62-24084-01, 62-24084-02, 62-24084-71, 62-24084-81, 62-24084-91, 62-24084-82, 62-24084-92, and AS-58494-13.

Dayton 2rtj7 axial fan, 24vdc, 4-11/16in h, 4-11/16in w

Barnett, Missouri, United States
Mar 27th

Get your hands on this indispensable device now and see the difference it can make. Experience improved airflow with this axial fan and take your device's operation to the next level. The DAYTON 2RTJ7 Axial Fan is a powerful 24VDC unit measuring 4-11/16 inches in height and width.

Diel blower fan

New Haven, Connecticut, United States
Mar 27th

Diehl Blower Fan with 3 Phase AC Motor 24" H x 22.5" W x 24" D. , D1204 Frame, 1 HP, Rise 40, RPM 1140-60 Cycles, RPM 950- 50 Cycles 203-220 Volts. Some rust.