body shaft for sale, brand-new and used.

NEW IN BOX. DAYTON 5UKE7 GP MOTOR. TEFC, (TOTALLY ENCLOSED,FAN COOLED).

Small DC Electric Motor 02-08 VDC 8000rpm 0.8mN-m M10 Permanent magnet reversible with sleeve bearing. Very powerful for its small physical size. This motor mounts from the front via two small tapped holes.

YOU ARE BIDDING ON Direct Drive Blower, Split Phase Totally Enclosed Air Over Motor, HP 1/3, RPM 1725, Number of Speeds 1, Voltage 115 V, NEMA Frame 56Z, Body Diameter 6 1/8 Inch, Service Factor 1.00, Frequency 60 Hz, Mounting Cradle/Stud, Bearings Double Shielded Ball, Thermal Protection Manual, Shaft Dimensions 1/2 x 1 1/2 Inch, Full Load Amps 5.5, Rotation CW/CCW NEW , PACKAGE IS NOT IN GOOD CONDITION MODEL # 5M298 MFR : DAYTON

This is an auction for a NEW Mabuchi RS-550PF Motor with a 13,500 RPM CCW Rotation. The motor shaft has a Counter-Clockwise Rotation when looking directly at the front of the motor. This motor is New Old Stock (N.O.S.) from a bulk case, with no retail packaging.

This is an auction for a NEW Mabuchi RS-540SH-32105, Dual Shaft Motor with a 7,100 RPM CCW Rotation. The motor shaft has a Counter-Clockwise Rotation when looking directly at the front of the motor. This motor is New Old Stock (N.O.S.) from a bulk case, with no retail packaging.

Powerful little 12v motor for many hobby applications. Motor comes with a V-Groove pulley for use with O-Ring belt or can be removed for straight shaft connection. Rubber grommet on output end was apparently a motor mount and can also be removed.

Motor: Rated Voltage: 13.5 VDC Rated Speed: 50 RPM Rated Load: 60 Watts Rated Torque: 11.5 N-m (8.5 ft-lb) Mounting: M6 screw holes Shaft: 10mm shaft with 2 flats where flat to flat is 6.6mm and threaded end to fit a M6 tightening nut This motor is ideal for machinery, automotive, or home/garage projects. The gear motor is measured to be 7" long and motor itself has a diameter of 2.5 inches. Coupling: Secure Type: Set scr

NEW!! Quantity 2 in stock at time of original listing, NEW!!, Baldor special electric motor, catalog #36J231W726G1, 36J231W726G1, spec.

Dayton Fan Motor, 1/3 HP, 1100, 115 V, 48YZ, TEAO - 4ETE5 Air Circulator Motor Air Circulator Motor, Permanent Split Capacitor, Totally Enclosed Air-Over, 1/3 HP, Nameplate RPM 1100, Voltage 115, Full Load Amps 4.2, 60 Hz, 1 Phase, NEMA/IEC Frame 48YZ, Service Factor 1.0, Ambient 40 C, Insulation Class B, Number of Speeds 2, Yoke/Stud Mounting, Sleeve Bearings, Auto Thermal Protection, Rotation CCWLE, Body Dia 5 5/8 In, Length Less Shaft 6 5/8 In, Shaft Dia 5/8

var itemNumber = window.ebayItemID ?

Sunnysky X3508S KV580 Brushless Disc Motor for Quadcopter Multicopter Dynamic BalanceDescription: Sunnysky X3508S KV580 Brushless Disc Motor for Quadcopter Multicopter Dynamic Balance Specifications: - Stator Dia.: 35mm - Stator thickness: 8mm - No. of stator arms: 12 - No.

Compatible Groove Depth 0.007 inchesCompatible Groove Diameter 0.222 inchesCompatible Groove Width 0.018 inchesFor Outside Diameter 5/64 inchesFor Shaft Diameter

Standard External Retaining Ring, Tapered Section, Axial Assembly, PH15-7 Stainless Steel, Passivated Finish, 1/16" Shaft Diameter, 0.078" Thick, Made in US Retaining rings attach to a shaft (external) or install in a bore (internal), creating a shoulder to maintain component positioning within an assembly.

Crescent External Retaining Ring, Tapered Section, Radial Assembly, SAE 1060-1090 Carbon Steel, Phosphate Finish, 5/16" Shaft Diameter, 0.025" Thick, Made in US (Pack of 50) Retaining rings attach to a shaft (external) or install in a bore (internal), creating a shoulder to maintain component positioning within an assembly.

1738UC9C.2.98 New Huck Magna-Grip Rivet Collars, Part Number MCG-R20UL. Each bid quantity is for a Lot of Twenty-Five (25) Collars. You may bid / buy any number of lots, up to the total quantity available above.

NEW IN BOX--IN ORIGINAL FACTORY SHRINK WRAP. Box only opened to take pictures. These motors have a flat area machined onto the shaft for locking in a pulley or gear.