bolt block for sale, brand-new and used.

AVAILABLE FOR SALE FUSE BLOCK , HERE ARE THE SPECS : Max. Voltage 600 Amps AC100 Number of Poles 3 Connector Type Box Mounting StyleBolt Down Fuse Block Design Open Fuse Length 2-15/16" Fuse Dia. 13/16" Wire Size

Littelfuse POWR-GARD LFH250601CIDClass H Fuse block Ampere Rating (A): 60Fuse Type: Class H/KIndicating: YesMounting Method: Bolt-In / DIN RailVAC (V): 250 LittelfuseLFH250601CID250V 60Amps2-4 AWG 50in/lbs6-14 AWG 25in/lbsCU-AL 60/75Use Class H Fuses

SET OF 24 TOP GRADE, RUGGEDIZED, HIGH TEMPERATURE, ELEMENTALLY HARDENED, PRECISION TOLERANCE, N48H NEODYMIUM, RARE EARTH, PERMANENT MAGNETS This auction is for an entire set of 24 magnets. The dimensions of each magnets is 2 inches long x 1 inch wide x 5/16 of an inch thick. They are magnetized through their thickness for use in windmills, generators, magnet motors, alternators, etc.

SET OF 12 TOP GRADE, RUGGEDIZED, HIGH TEMPERATURE, ELEMENTALLY HARDENED, PRECISION TOLERANCE, N48H NEODYMIUM, RARE EARTH, PERMANENT MAGNETS This auction is for an entire set of 12 magnets. The dimensions of each magnets is 2 inches long x 1 inch wide x 5/16 of an inch thick. They are magnetized through their thickness for use in windmills, generators, magnet motors, alternators, etc.

Genuine U.S. Military Issue Surplus   Hydraulic Block with Control (?)   We are not sure who manufactured this part, the only markings we found on the item were the following. On the hydraulic block it has....

L.S. Starrett / Weber Gage Block Set in a wooden box, this is the 1" square blocks with a hole in the middle. It is a very nice set the wooden box has a drawer that pulls out, it stores specialty blocks.

*************Buy 2 get 1 FREE************** Buy 2 cd titles through the auction or fixed price format listings and during the check-out process send a message to request a free CD title of your choice. ***************************************** Item Description This Ebay listing is for the sale of a CD ROM publication of a Text book of Elementary Blacksmithing suitable for technical and vocational school students. O

Item Description This Ebay listing is for the sale of a CD ROM publication of a Text book of Elementary Blacksmithing suitable for technical and vocational school students. Originally published in 1920. CD ROM Title: Forge Practice.

The Master Gun Parts handle fits our Garand Receiver Wrench and Winchester Model 70 Receiver Block. The MGP handle mounts in the parallel position to the wrench block so that the handle points out, instead of down as with many other handles. With the handle level, it is easier to tighten or loosen the receiver by pushing downward on the handle.

This is a used poly or plastic v block. Has 1/2" threaded holes in the base. Pictures are part of the description.

Generic riser block kit machined to fit the Delta 14" band saw with a 7/8" hexagon post.

Generic riser block kit re-machined to fit the Delta 14" bandsaw with a 15/16" round upper guide post. Cross references and interchanges with Delta model 28-284 riser block kit 15/16" Diameter Guide Post now reversible for flat or radius end locking screws Colors may vary from picture. 15/16" guide post has a flat milled on one side and a round groove on the other for both types of height adjusting screws, (flat or round end), to bear on and to align the upper guide bracket.

New billet aluminum replacement rear clamp block for your Delta Unisaw fence This is a replacement clamp block for the rear of the early style Unisaw fence. The early style fence is shown in photo #2. This fence is identified by the presence of the small rear clamp tighening knob above the lever lock at the operator side