bottoming tap for sale, brand-new and used.

WIDIA GTD 16006 5-40 HS G H2 2F BOTTOM FAST SPIRAL TAP 2748370 Spiral-Flute Taps • Blind Holes in General Machining Applications.Series 2314/5314 • Machine Screw and Fractional • Bottoming Chamfer Thread Size 5-40 Total Length 1.94mm Drill Cutting Length .56mm Shank Diameter .141mm Number Of Fl

Ground Thread Hand Tap Set This listing is for three (3) taps. Tap Size: 1/4-28Chamfers: Bottoming; Plug; TaperNumber of Flutes: 4Thread Limit: GH1

OSG - 1/2-20 UNF, H3, 3 Flute, Oxide Coated, Vanadium High Speed Steel Spiral Flute Tap Modified Bottoming Chamfer, Right Hand Thread, 3-3/8 Inch Overall Length, 1-21/32 Inch Thread Length, 0.367 Inch Shank Diam, Series 290 Features and Benefits Modified bottoming chamfers are similar to bottoming chamfers, but they are longer and have more teeth. They are used for threading blind holes and have 2 to 2-1/2 threads.

The Bath tap is 2 flute with a standard lead & the Greenfield is a 4 flute with the bottoming lead.Both are unused.

1/2-20 STI NF HIGH SPEED STEEL STRAIGHT FLUTE GA H3 4FLUTE BOTT HELICOIL TAP Size 1/2-20 STI Tap 4 Flute tap with a thread limit of H3 G A Oversize Made in USA H3 = Basic Plus .0010 to Plus .0015 Bottoming Chamfer Material is High Speed Steel 4 Taps All Together Brand New Taps. Still in plastic holders

This listing is for three 1/2-13 tap or tap set. Made by Greenfield in the USA. Part # 14284.

Quality products at affordable prices. Check out our

3/8-24 STI SPIRAL FLUTE TAP GH3 3FLUTE BOTTOM HSS Size is 3/8-24 and it is a STI Tap, High Speed Steel Tap. Its a 3 flute spiral flute tap. The Thread limit is a H3 and the thread and flute spiral is a right hand directional movement.

This listing is for one new old stock M12 x 1.75 3 piece tap set. Made by Kennametal in the USA. Part # KHSST28454.

This listing is for three 9/16-12 tap or tap set. Made by Hertel in the USA. Part # 07679962.

This listing is for three 7/16-14 tap or tap set. Made by Hertel in the USA. Part # 02385367.

(Lot# TP-81) New! Tap with Tap drill bit dispenser with 32 new taps & 48 new tap drill bits. Includes: Jobber & Screw machine.

This is a brand new and unused 3 piece set of taps from Greenfield . All made from hss and manufactured in the US. The 3 taps consist of the starter ( taper tap ) the intermediate tap and finally the finishing or bottoming ( plug tap ) 3 sets are available .......

This is some good tooling. Everything new and unused. Some is in cases, some is not.

YMW 3/8-24 Hand Taps (EDP# 381217) Thread Limit: H3Chamfer: BottomingNumber of Flutes: 4 Thread Length: 1-1/4"Overall Length: 2-15/16" Thread Standard: UNF

Union Butterfield 1/4-20 H3 4F hand tap set. Material: HSS Number of Flutes: 4 Size: 1/4-20 Thread Limit: H3 Type: 1500S