+ Post new Ad
BRAND NEW BIG KNURLING WHEELS DIES, WE PAID $1165 FOR THESE, US $249.00 – Picture 0
BRAND NEW BIG KNURLING WHEELS DIES, WE PAID $1165 FOR THESE, US $249.00 – Picture 1
BRAND NEW BIG KNURLING WHEELS DIES, WE PAID $1165 FOR THESE, US $249.00 – Picture 0
BRAND NEW BIG KNURLING WHEELS DIES, WE PAID $1165 FOR THESE, US $249.00 – Picture 1

Brand New Big Knurling Wheels Dies, We Paid $1165 For These

US $249.00

  • Vero Beach, Florida, United States
  • Jan 30th
Open on mobile:
QR code
THIS IS A BRAND NEW SET OF KNURLING WHEELS, THE PROJECT NEVER WENT THROUGH SO WE HAVE NO USE FOR THEM.THIS SET IS A 0.6237 MM BETWEEN THE TEETH, I BELEIVE THAT CONVERTS TO 28.8 TPI 45 DEGREE BUT I AM NOT SURE, SO PLEASE CHECK YOUR SELF. THE WHEELS ARE AROUND 6 INCHES IN DIAMETER, 40 MM WIDE AND THE CENTER HOLE IS 54 MM. THESE ARE VERY EXPENSIVE AND WE GOT THEM FOR $1165 A SET BECAUSE WE BOUGHT MULTIPLE SETS. THIS AUCTION IS FOR A SET OF 2 WHEELS, TO MAKE A DIAMOND PATTERN. I HAVE 3 OTHER SETS AVAILABLE TOO. 2 SETS OF 0.26M IT IS AROUND 30 TPI 30 DEGREE, THEY ARE 6 INCHES IN DIAMETER AND 2 INCHES WIDE AND THE CENTER HOLE IS 54 MM. 1 SET OF 0.90 MM IT IS AROUND 28 TPI 30 DEGREE, THEY ARE 6 INCHES IN DIAMETER AND 2 INCHES AND THE HOLE IS 54 MM. HAPPY BIDDING.

Directions

Similar products from Tools for Other Machines

PowAir Air Press Feed 12" Air Feed (Used)

PowAir Air Press Feed 12" Air Feed (Used)

  • Lynnwood, Washington, United States
  • Jan 30th
Faimond CNC Diamond Faceting Machine, Model Futura 4AX, READY TO WORK!

Faimond CNC Diamond Faceting Machine, Model Futura 4AX, READY TO WORK!

  • Pawtucket, Rhode Island, United States
  • Jan 30th
TRIBOS-SVL tool extension 1/2 inch .500

TRIBOS-SVL tool extension 1/2 inch .500

  • Hot Springs National Park, Arkansas, United States
  • Jan 30th
KRAFT TOOL CO. 48" Weigh-Lite Concrete Finish Broom CC158; 765139611588

KRAFT TOOL CO. 48" Weigh-Lite Concrete Finish Broom CC158; 765139611588

  • Norfolk, Virginia, United States
  • Jan 30th
Samsung SL 25B-500, CNC Lathe

Samsung SL 25B-500, CNC Lathe

  • Watertown, Connecticut, United States
  • Jan 30th
USED WYSONG 6' x 1/4" Mechanical Shear

USED WYSONG 6' x 1/4" Mechanical Shear

  • Watertown, Connecticut, United States
  • Jan 30th
Malco PL1 Metal Stud Crimper

Malco PL1 Metal Stud Crimper

  • Elizaville, New York, United States
  • Jan 30th
Atlas 10" & 12" Lathe - Mitre Gear w/ Bolt / OC 35

Atlas 10" & 12" Lathe - Mitre Gear w/ Bolt / OC 35

  • Long Beach, California, United States
  • Jan 30th
grinding wheel balancing arbor/ ///////

grinding wheel balancing arbor/ ///////

  • Greenfield, Indiana, United States
  • Jan 30th
grinding wheel balancing arbor

grinding wheel balancing arbor

  • Greenfield, Indiana, United States
  • Jan 30th
Malco TSHD Heavy Duty Metal Cutting Turbo Shear Drill Attachment Turboshear

Malco TSHD Heavy Duty Metal Cutting Turbo Shear Drill Attachment Turboshear

  • Sevierville, Tennessee, United States
  • Jan 30th
VINTAGE DUMORE HAND GRINDER electric machine shop die tool PRTS or REPAIR

VINTAGE DUMORE HAND GRINDER electric machine shop die tool PRTS or REPAIR

  • Milroy, Indiana, United States
  • Jan 30th
Dapra Biax 7 EL Scraper with Case 7 EL

Dapra Biax 7 EL Scraper with Case 7 EL

  • Grand Haven, Michigan, United States
  • Jan 30th
NEW TOOL MAKERS INTERNATIONAL R-7 1ST OP D/G SEAMER ROLL D367498

NEW TOOL MAKERS INTERNATIONAL R-7 1ST OP D/G SEAMER ROLL D367498

  • Delta, Ohio, United States
  • Jan 30th
30" OGP XLO-827 OPTICAL COMPARATOR, DRO, POWER Tbl, 10X/20X/31.25X, SURF. ILL.

30" OGP XLO-827 OPTICAL COMPARATOR, DRO, POWER Tbl, 10X/20X/31.25X, SURF. ILL.

  • Harrison, New Jersey, United States
  • Jan 30th
Powermatic 66 Tbl SAW WOODWORKING, 10", 5HP, Tilt Blade

Powermatic 66 Tbl SAW WOODWORKING, 10", 5HP, Tilt Blade

  • Harrison, New Jersey, United States
  • Jan 30th
48" L 24" W Unknown 4' X 2' BLACK GRANITE SURFACE PLATE GRANITE SURFACE PLATE, O

48" L 24" W Unknown 4' X 2' BLACK GRANITE SURFACE PLATE GRANITE SURFACE PLATE, O

  • Harrison, New Jersey, United States
  • Jan 30th
3.15" Dia. 63.6' L ft Iemca KID 16 BAR FEED

3.15" Dia. 63.6' L ft Iemca KID 16 BAR FEED

  • Harrison, New Jersey, United States
  • Jan 30th
400 TAPER 1Pc QUANTITY Valenite Indexable Face Mill TOOL HOLDER

400 TAPER 1Pc QUANTITY Valenite Indexable Face Mill TOOL HOLDER

  • Harrison, New Jersey, United States
  • Jan 30th
30" 14 Jones & Lamson EPIC 130 OPTICAL COMPARATOR, QUADRA CHECK III DRO

30" 14 Jones & Lamson EPIC 130 OPTICAL COMPARATOR, QUADRA CHECK III DRO

  • Harrison, New Jersey, United States
  • Jan 30th

People who viewed this item also vieved

ORIGINAL SOUTH BEND SPANNER WRENCH LATHE TOOL 1 1/2" SPINDLE 3201NK1

ORIGINAL SOUTH BEND SPANNER WRENCH LATHE TOOL 1 1/2" SPINDLE 3201NK1

  • Edison, New Jersey, United States
  • May 25th
1 Bison 7-873-108 adapter for lathe chuck 8212-10 1/2"-8

1 Bison 7-873-108 adapter for lathe chuck 8212-10 1/2"-8

  • Graham, North Carolina, United States
  • May 25th
NOS NEW CLAUSING ATLAS METAL LATHE NO. 7025 2" CLAMP DOG MACHINIST TOOLING

NOS NEW CLAUSING ATLAS METAL LATHE NO. 7025 2" CLAMP DOG MACHINIST TOOLING

  • Ridgefield, Washington, United States
  • May 25th
VECTRAX 3 Axis CNC Vertical Milling Machine w/Centroid M15 Control 3 Axis DRO

VECTRAX 3 Axis CNC Vertical Milling Machine w/Centroid M15 Control 3 Axis DRO

  • Louisville, Kentucky, United States
  • May 26th
VALENITE 5-FLUTE 1-1/2" INDEXABLE MILLING CUTTER #539.63.212

VALENITE 5-FLUTE 1-1/2" INDEXABLE MILLING CUTTER #539.63.212

  • Cadiz, Kentucky, United States
  • May 26th
VALENITE 2-FLUTE 1-1/4" INDEXABLE MILLING CUTTER #539.62.624

VALENITE 2-FLUTE 1-1/4" INDEXABLE MILLING CUTTER #539.62.624

  • Cadiz, Kentucky, United States
  • May 26th
24" GROB Vertical Band Saw Type NS24

24" GROB Vertical Band Saw Type NS24

  • Paramount, California, United States
  • May 29th
Kasto Racine HBA 360UA Automatic Horizontal Band Saw AU 14.2"x14.2"

Kasto Racine HBA 360UA Automatic Horizontal Band Saw AU 14.2"x14.2"

  • Orange, California, United States
  • May 29th
Delta 20" Vertical Bandsaw, 4500 RPM, 12" Work Height, 24" x 24" Table.

Delta 20" Vertical Bandsaw, 4500 RPM, 12" Work Height, 24" x 24" Table.

  • Fullerton, California, United States
  • May 29th
Macklin Assorted Fine Grinding Wheels

Macklin Assorted Fine Grinding Wheels

  • Pomona, California, United States
  • May 29th
Carborundum Cup Grinding Wheels

Carborundum Cup Grinding Wheels

  • Pomona, California, United States
  • May 29th
Yuasa 550-001 Wheel Radius & Angle Dresser w/ Service Manual & Case

Yuasa 550-001 Wheel Radius & Angle Dresser w/ Service Manual & Case

  • Mount Pleasant, South Carolina, United States
  • May 29th
Mitsubishi Model M55J Ram EDM CNC Sinker 3R Spindle Fire suppression System

Mitsubishi Model M55J Ram EDM CNC Sinker 3R Spindle Fire suppression System

  • Lake Saint Louis, Missouri, United States
  • May 30th
EDM Wire Brass 0.30mm 3.49KG (7.69 lb) 1100 N/mm2

EDM Wire Brass 0.30mm 3.49KG (7.69 lb) 1100 N/mm2

  • Corona, California, United States
  • May 30th
Drive gear for many System 3R rotating spindles

Drive gear for many System 3R rotating spindles

  • Warren, Michigan, United States
  • May 30th
#6-1/2" JT33 SELF REVERSING TAPPING HEAD,3 & 4 MT SHANKS & 2 COLLETS (3900-1501)

#6-1/2" JT33 SELF REVERSING TAPPING HEAD,3 & 4 MT SHANKS & 2 COLLETS (3900-1501)

  • Chino, California, United States
  • May 30th
#0-1/4" JT33 SELF REVERSING TAPPING HEAD,2 & 3 MT SHANKS & 2 COLLETS (3900-1251)

#0-1/4" JT33 SELF REVERSING TAPPING HEAD,2 & 3 MT SHANKS & 2 COLLETS (3900-1251)

  • Chino, California, United States
  • May 30th
#0-1/4" JT6 SELF REVERSING TAPPING HEAD, 2 & 3 MT SHANKS & 2 COLLETS (3900-1250)

#0-1/4" JT6 SELF REVERSING TAPPING HEAD, 2 & 3 MT SHANKS & 2 COLLETS (3900-1250)

  • Chino, California, United States
  • May 30th
1) Fenn High Production Heavy Duty Tube End Forming Machine 0 Used - AM13756

1) Fenn High Production Heavy Duty Tube End Forming Machine 0 Used - AM13756

  • Cleveland, Ohio, United States
  • Jun 1st
Parker Tube End Beading & Flaring Machine - Used - AM14707

Parker Tube End Beading & Flaring Machine - Used - AM14707

  • Cleveland, Ohio, United States
  • Jun 1st
PINES HYDRAULIC TUBING BENDER 5 HP 10100-69328

PINES HYDRAULIC TUBING BENDER 5 HP 10100-69328

  • Ellington, New York, United States
  • Jun 1st
Sunnen GY25-J45 One KeyWay Stone Set Diameter Range 2.5" To 3.3"

Sunnen GY25-J45 One KeyWay Stone Set Diameter Range 2.5" To 3.3"

  • Tampa, Florida, United States
  • Jun 2nd
Sunnen GY25-J87 One KeyWay Stone Set Diameter Range 2.5" To 3.3"

Sunnen GY25-J87 One KeyWay Stone Set Diameter Range 2.5" To 3.3"

  • Tampa, Florida, United States
  • Jun 2nd
18 x 24" Large Cast Iron Lapping Plate by Corban Scraping & Machinery Model 1824

18 x 24" Large Cast Iron Lapping Plate by Corban Scraping & Machinery Model 1824

  • Redwood City, California, United States
  • Jun 2nd
NEW SET OF 3 RSVP 3/8-16 UNC RA2 THREAD ROLLS / CHASERS FETTE NAMCO R

NEW SET OF 3 RSVP 3/8-16 UNC RA2 THREAD ROLLS / CHASERS FETTE NAMCO R

  • Pomona, California, United States
  • Jun 6th
NEW SET OF 3 RSVP M8 - 10 X 1 RA2 THREAD ROLLS / CHASERS FETTE NAMCO

NEW SET OF 3 RSVP M8 - 10 X 1 RA2 THREAD ROLLS / CHASERS FETTE NAMCO

  • Pomona, California, United States
  • Jun 6th
NEW SET OF 3 RSVP M12 X 175 RA2 THREAD ROLLS / CHASERS FETTE NAMCO

NEW SET OF 3 RSVP M12 X 175 RA2 THREAD ROLLS / CHASERS FETTE NAMCO

  • Pomona, California, United States
  • Jun 6th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies