Brand New!!! Fluke Networks Cable Iq Complete Service Kit Cable Qualifier

US $2900

Los Angeles, California, United States
Jan 29th

Open on mobile:
QR code

BRAND NEW NEVER USED!!!! Copper qualification tester troubleshoots and qualifies Ethernet network cabling speed (10/100/1000/VoIP). Qualifies - Tests if your existing Ethernet network cabling has the bandwidth to support voice, 10/100, VoIP or Gigabit Ethernet Troubleshoots - shows why existing Ethernet network cabling cannot support the network's bandwidth requirement (e.g. crosstalk at 11 meters) Discovers - detects what's at the end of any Ethernet network cable and displays device configuration (speed/duplex/pairing) Identifies unused switch ports that can be reallocated Graphically maps wiring configuration and shows distance to faults with Intelligent Wiremap Tests all copper cabling media: twisted-pair, coax, and audio cabling The network tech's vision into cabling bandwidth CableIQ qualification tester is the first cabling bandwidth tester for network technicians. This Ethernet network cable tester gives even the most novice tech the vision to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable. That means network techs can close trouble tickets faster, reduce on-call time, and save money by better utilizing their existing infrastructure. Reduce escalated problems by as much as 30% CableIQ qualification tester's powerful network troubleshooting capability and intuitive interface enable your frontline technicians to identify and troubleshoot a wider range of problems within your network infrastructure. Is the port active? Are the duplex settings matched? Is it a network problem or a Ethernet cable problem? Can the Ethernet cable support the required network bandwidth? CableIQ network cable tester is the only Ethernet cable tester that can answer all these questions before trouble tickets are escalated to the next level reducing problem escalation by up to 30%. Cable types supported UTP, STP, FTP, SSTP, RG6, RG59, audio and security Qualification autotests 1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax Supported tests Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection. Wiremap Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs. Find fault Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application Results storage Up to 250 qualification test results Power Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries Battery life 20 hours of typical use, without backlight Other battery types supported 4AA photo lithium, NIHM, NICAD Dimensions and weight 7in x 3.5in x 1.75in (17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg) » Bandwidth Qualification When you deploy Voice over IP (VoIP) or Gigabit Ethernet, you want to make sure that the existing cabling will support the bandwidth requirements of your new equipment. Your cabling was certified, but moves adds and changes have rendered many links incapable of running desired speeds. CableIQ quickly reveals whether a link, including patch cords, is qualified for voice, 10/100BASE-T, VoIP, or Gig. Knowing your cabling's bandwidth capabilities before upgrading can prevent countless hours of future downtime and labor hours wasted on unnecessary troubleshooting. See what speeds your existing cabling can support. CableIQ's four-second Autotest clearly indicates with a check mark which speeds and applications the tested cable can run. » Cable Troubleshooting Plug into any cable, patch panel, or wall jack and see both the cable details (length/wiremap) and far-end device details (speed/duplex settings) at once. A series of both cable and network test functions help you isolate connectivity problems. For instance, if Discover mode shows duplex settings are matched but the problem persists, run Autotest to see if the cabling can support the required bandwidth. If a link is not qualified, CableIQ provides detailed information on the nature and location of cabling performance faults such as crosstalk or large impedance changes. With CableIQ your techs can close trouble tickets faster by cutting cable troubleshooting time in half. Troubleshoot cabling faults in half the time. This screen shot represents a cabling link that did not qualify for 1000BASE-T because of a connection fault at 4.1 meters. » Infrastructure Discovery Free up 10% or more of your switch ports CableIQ's Discover mode shows you exactly what's at the far end of any cable. At the switch, test each cable one at a time. You can quickly see whether the cable is open at the far end, or is connected to a PC. Or use CableIQ's hub blink feature from the workstation to flash the corresponding switch port LED. You may be surprised at how many unused ports you can free up and redeploy using CableIQ. Determine where installed cables are routed, all from one location. Attach remote ID's in different locations, then perform multiple cable tests from the distribution center or wiring closet. CableIQ provides the wiremap, pair lengths, distance to fault, and remote ID number of each tested cabling link. » Intelligent Wiremap Intelligent wiremap tests for length, shorts, split pairs, or opens and displays with an intuitive graphical interface where a fault is located. CableIQ's Intelligent Wiremap shows pin 6 open at far end of tested cable (130 ft/34 meters). » IntelliTone Technology Locate cables and wires with superior accuracy CableIQ supports IntelliTone digital toning by: Finding cables easier and tracing with better accuracy than any other tool on the market Toning and tracing safely on a live network Providing two digital tones and four analog tones Featuring IntelliTone cable mapping; after tracing, use the IntelliTone Pro Probe 200 to verify wiremap » Easy-to-use Empower frontline techs with an easy-to-use-tool Intuitive user interface and graphical display guides user with little or no training required. Rotary knob makes learning easy and operation simple you always know what test mode is selected Portable, lightweight, rugged ergonomic design for easy field use Four AA batteries - Long lasting battery life for several weeks of testing Remote adapter doubles as a protective endcap.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Fluke Networks
Connectors	USB, RJ-11, RJ-45
Model	CIQ-KIT
MPN	Fluke Networks Cable IQ Kit
UPC	754082031963