brass elbow for sale, brand-new and used.

Automatically dispenses a correct dilution of Dish Detergent or Liquid Sanitizer. Installed above kitchen sink. ASSE certified air gap proportioner Stainless steel cover Flow rate 4GPM, Mixing Rate: 1:10 to 1:512 adjusted by (21) metering tip included Standard Accessory:

Wall mount faucet installation kit comes with everything you need to properly install a wall mounted faucet. The threaded end of the elbow attaches to the end of your faucet, while the unthreaded end is soldered to a 1/2" copper water inlet pipe. Each wall mount faucet installation kit includes: -(2) 1/2" Brass Elbows (1 threaded end) -(2) 1/2" Brass Nipples -(2) Rubber Washers -(2) Lock Nuts

CONTACT ME FOR BETTER PRICE QUOTE! AND COMBINE SHIPPING RATE

Single Splash Mount Faucet w/ 3-1/2" Gooseneck Spout No Lead NO LEAD faucets are required for California and Vermont! (No Lead faucets is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193.) Product Features: Forged brass body with

Wall Mount Faucet 3-1/2" Gooseneck Spout Single Backsplash Base

These Plaques are highly polished and difficult to photogragh due to the reflective finish.They are cast with high quality bronze alloy.They have a raised pattern that highlights the lettering and frame.The dimensions are 7 1/8 inches wide and 2 1/8 inches high.All sales include brass mounting screws.We specialize in custom brass rail systems including foot rails,elbow rails,hand rails and spinning poles. We can be reached at 215-249-0188

DWV Fittings Drain, waste and vent fittings (DWV) are used in residential and commercial sanitary systems.   NIBCO metal fittings are made from the highest quality raw materials. Wrot fittings are made from commercially pure copper mill products per ASTM B75 Alloy C12200 and conform to ANSI/ASME B16.29.   Cast fittings are made per ASTM B584 Alloy C84400 and conform to ANSI/ASME B16.23. DWV 45° Elbow C x C - Cast, #806 Dezincification resistant ASTM B584 Alloy C84400, ASME B16.23 Size 4"

These Push Plates are mirror polished and difficult to photogragh due to the reflective finish.They are cast with high quality bronze alloy and protect your door finish.They have a raised rope pattern. All sales include brass mounting screws.We specialize in custom brass rail systems including foot rails,elbow rails,hand rails and spinning poles. Visit us at worthingtonforge.com.

142126 New-No Box, Parker BFSE-18N Lot-2 Brass Fittings, 90Deg Elbow, 1/8 NPT, . Item is New, unused, no factory packaging. Austin Surplus SKU: 142126 Location: GRG-R15-P10-S04-C-0000408

Two elbows, both 3/8" to 1/2", new, never used

Just like the title says lot of 5 oxygen clean from swagelok

UP FOR AUCTION 8 SHARK BITE 1/4" ELBOW PUSH FITTI

Krome Dispense Keg Coupler 90° Elbow Great for a 90° turn if you have issues with clearance. Bought this for $23.75 at the local homebrew store, opened it, and never made the switch to Sanke. I would have needed this to get clearance in my kegerator.

This auction is for 5 pcs of original Parker 2214P-6-6. FREE SHIPPING

This auction is for 10 pcs of original Parker 2214P-6-6. FREE SHIPPING

Application : Industical blowing,Blowing dust ,lathe scrap iron blowing include : 1x Mov-02 mechanical valve1 x 1/8” BSP brass muffler1 x 1/8” male - 1/4” male brass adapter1 x 1/4” Female -1/2 male brass adapter1 x QE-04 quick exhaust valve1 x DIY spring

As Pictured:

Size: 1/2 in. x 1/2 in. Type: Drop Ear Elbow Degree: 90 Degree Connection Type: C x F, Sweat x FPT Material: Brass Condition: New Quantity: 10 Pieces Comes with FREE teflon tape Priority shipping