broach bit for sale, brand-new and used.

Draw Broach  Spline BSS-10-875C 7/8-10-B3 Has

3 3/4 "4 flute Cobalt roto broaches, 3 7/8"Unibar& Slugger 6 flute roto broaches 1 is 2" long & 2 are 4" long. 1 1 7/8" milling bit, 1 new 25/32"HSS split point silver & deming drill bit, and 3 1" HSS cobalt machine bits

(8) FACTORY RECONDITIONED Norseman 16342 5/8 x 2 Annular Cutter High Speed Steel Spira-Broach 13LSPCUTTERS ARE STILL IN THEIR CUTTER DIPPED CONDITION AND READY TO USE.ONE MONEY TAKES THEM ALLGOING TO THROW IN A 5/8 ROTABROACH CUTTER ALSO FACTORY RECONDITIONED ON THE WINNING BID (IT IS THE SILVER BIT IN THE PIC)

Broach was used a few times and then just put away in storage. Very good condition picture is exactly what you will get. Check for the additional sizes listed as well.

Broach was used a few times and then just put away in storage. Very good condition picture is exactly what you will get. Check for the additional sizes listed as well.

Broach was used a few times and then just put away in storage. Very good condition picture is exactly what you will get. Check for the additional sizes listed as well.

Broach was used a few times and numbers are worn off. . Very good condition picture is exactly what you will get.

Broach was used a few times and numbers are worn off. . Very good condition picture is exactly what you will get.

Broach was used a few times and then just put away in storage. Very good condition picture is exactly what you will get. Check for the additional sizes listed as well.

These are high performance rotary broaching bits. Please specify from size 5/16 or 8MM hex when ordering. Made from superior FORTE material Angular clamping flat prevents pull out Fits most rotary broaching tools All bits are 8MM diameter by 1.250 long 2x and greater depth of cut Special sizes available upon request for slightly higher cost

These are high performance rotary broaching bits. Please specify size from list below when ordering. Made from superior FORTE material Angular clamping flat prevents pull out Fits most rotary broaching tools All bits are 1.750" long x 1/2" shank 2x and greater depth of cut Most in stock to ship immediately Special sizes available upon request for slightly higher cost Sizes available STD Metric 3/32 2.0MM 7/64 &n

These are high performance rotary broaching bits. Please specify length, 1.250 or 28MM 1.103 Made from superior FORTE material Angular clamping flat prevents pull out Fits most rotary broaching tools that use 8MM shank bits Bits are 1.250" long for standard holders or 28mm long for swiss 2x and greater depth of cut Most in stock to ship immediatly See our othe ebay listings for more sizes Special sizes available upon request for slightly higher cost