+ Post new Ad
BRUNSWICK PRECISION 12" INSPECTION V BLOCK SINE BLOCK, US $790.00 – Picture 0
BRUNSWICK PRECISION 12" INSPECTION V BLOCK SINE BLOCK, US $790.00 – Picture 1
BRUNSWICK PRECISION 12" INSPECTION V BLOCK SINE BLOCK, US $790.00 – Picture 2
BRUNSWICK PRECISION 12" INSPECTION V BLOCK SINE BLOCK, US $790.00 – Picture 3
BRUNSWICK PRECISION 12" INSPECTION V BLOCK SINE BLOCK, US $790.00 – Picture 0
BRUNSWICK PRECISION 12" INSPECTION V BLOCK SINE BLOCK, US $790.00 – Picture 1
BRUNSWICK PRECISION 12" INSPECTION V BLOCK SINE BLOCK, US $790.00 – Picture 2
BRUNSWICK PRECISION 12" INSPECTION V BLOCK SINE BLOCK, US $790.00 – Picture 3

Brunswick Precision 12" Inspection V Block Sine Block

US $790.00

  • Rochester, New York, United States
  • Jan 30th
Open on mobile:
QR code
SquareTrade © AP6.0 BRUNSWICK PRECISION 12" INSPECTION V BLOCK SINE BLOCK This is an Auction for a Brunswick Engineering Inspection Block. This inspection block is a multi-use - v-block, 10" Sine block that can be staged from 5 sides. Ground and lapped within very precision tolerance. Dimensions - 4" wide X 5 1/4" High X 12" Long Includes beautiful Hardwood Carrying Case. I will fully guarantee this item-new cost $2400. We have lots of quality inspection tools available - see my other auctions. Shipping in the Continental US is $19.90 - I have very competitive rates for our always welcomed International bidders. Thanks for looking! If you have any question on this item please call us at 1-800-826-3433 (9 - 5pm Eastern). Pay me securely with your Visa or MasterCard through PayPal!
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer Brunswick Engineering
Type Inspection Block

Directions

Similar products from Supporting Blocks & Sets

MACHINIST STEEL PARALLEL SET UP BLOCK 1-1/2" X 2" X 2-3/4"

MACHINIST STEEL PARALLEL SET UP BLOCK 1-1/2" X 2" X 2-3/4"

  • Chino, California, United States
  • Jan 30th
NEW - Right Angle 90 Degree Machining Set Up Angle Block 12" X 8" X 7"

NEW - Right Angle 90 Degree Machining Set Up Angle Block 12" X 8" X 7"

  • Suffern, New York, United States
  • Jan 30th
Starrett 651A5Z Dial Indicator W/O Deep Hole Attachment

Starrett 651A5Z Dial Indicator W/O Deep Hole Attachment

  • Colchester, Connecticut, United States
  • Jan 30th
Set Up Block, 7-1/2"W x 37"H x 10" D, (6) T-Slots (25834)

Set Up Block, 7-1/2"W x 37"H x 10" D, (6) T-Slots (25834)

  • Cincinnati, Ohio, United States
  • Jan 30th
Two different metric, machinist blocks, medium size, steel ________________A-30

Two different metric, machinist blocks, medium size, steel ________________A-30

  • Saint Louis, Missouri, United States
  • Jan 30th
Set Up Block, 7-1/2"W x 37"H x 10" D, (6) T-Slots (25836)

Set Up Block, 7-1/2"W x 37"H x 10" D, (6) T-Slots (25836)

  • Cincinnati, Ohio, United States
  • Jan 30th
MACHINIST STEEL PARALLEL SET UP BLOCK - 1/2" X 1" X 11-1/4"

MACHINIST STEEL PARALLEL SET UP BLOCK - 1/2" X 1" X 11-1/4"

  • Chino, California, United States
  • Jan 30th
Devlieg Angle Block, 14"x16-1/2" Top, 16"x16-1/2" Vert., 3T-Slots / Face (25837)

Devlieg Angle Block, 14"x16-1/2" Top, 16"x16-1/2" Vert., 3T-Slots / Face (25837)

  • Cincinnati, Ohio, United States
  • Jan 30th
Set Up Block, 7-1/2"W x 37"H x 10" D, (6) T-Slots (25835)

Set Up Block, 7-1/2"W x 37"H x 10" D, (6) T-Slots (25835)

  • Cincinnati, Ohio, United States
  • Jan 30th
ALORIS CXA 5 # 3 MOORSE TAPER HOLDER

ALORIS CXA 5 # 3 MOORSE TAPER HOLDER

  • Perrysburg, Ohio, United States
  • Jan 30th
Vintage Light Weight Arm to Hold Items

Vintage Light Weight Arm to Hold Items

  • Cynthiana, Kentucky, United States
  • Jan 30th
Machinist Holding/Grinding Block 2 1/16 X 2 5/8 X 2 5/8

Machinist Holding/Grinding Block 2 1/16 X 2 5/8 X 2 5/8

  • Cynthiana, Kentucky, United States
  • Jan 30th
Brown & Sharpe Magnetic Chuck Transferring V-Blocks - No. 756

Brown & Sharpe Magnetic Chuck Transferring V-Blocks - No. 756

  • Old Hickory, Tennessee, United States
  • Jan 30th
V Block,Taft-Peirce Style No. 9130 Machinist V Block & Clamp & Screws, USA

V Block,Taft-Peirce Style No. 9130 Machinist V Block & Clamp & Screws, USA

  • Saunderstown, Rhode Island, United States
  • Jan 30th
Machinists 12/5D BUY NOW USA Magnetic Transfer Pad for grinding

Machinists 12/5D BUY NOW USA Magnetic Transfer Pad for grinding

  • Lutz, Florida, United States
  • Jan 30th
Machinists 12/5D BUY NOW Buy Now

Machinists 12/5D BUY NOW Buy Now

  • Lutz, Florida, United States
  • Jan 30th
Starrett 278 V-Blocks Pair With Clamps USED

Starrett 278 V-Blocks Pair With Clamps USED

  • Byron, California, United States
  • Jan 30th
81 Pc Rectangular Steel Gage Block from .050 to 4" Set in case

81 Pc Rectangular Steel Gage Block from .050 to 4" Set in case

  • Madison Heights, Michigan, United States
  • Jan 30th
STARRETT WEBBER 63 Pc Square Steel Gage Block Incomplete Set in case

STARRETT WEBBER 63 Pc Square Steel Gage Block Incomplete Set in case

  • Madison Heights, Michigan, United States
  • Jan 30th
LOT of MACHINIST PARALLELS machinist tools Flat rate shipping

LOT of MACHINIST PARALLELS machinist tools Flat rate shipping

  • Kokomo, Indiana, United States
  • Jan 30th

People who viewed this item also vieved

Bull-Nose Live Center; #2 Morse Shank (CTAM 9614)

Bull-Nose Live Center; #2 Morse Shank (CTAM 9614)

  • Sicklerville, New Jersey, United States
  • Jun 7th
ROYAL 10909 Pipe And Bull Head Live Center-Taper:5 MT

ROYAL 10909 Pipe And Bull Head Live Center-Taper:5 MT

  • Duncan, South Carolina, United States
  • Jun 7th
ROYAL 10910 Pipe And Bull Head Live Center-Taper:6 MT

ROYAL 10910 Pipe And Bull Head Live Center-Taper:6 MT

  • Duncan, South Carolina, United States
  • Jun 7th
Suburban Tool INC.Taft Peirce sine bar. Very nice in wood case Item 6

Suburban Tool INC.Taft Peirce sine bar. Very nice in wood case Item 6

  • Walland, Tennessee, United States
  • Jun 7th
Suburban Precision Angle Plate

Suburban Precision Angle Plate

  • Sahuarita, Arizona, United States
  • Jun 7th
5" Precision Hardened and ground Sine Bar in Wooden Case VERY NICE!!!! fowler?

5" Precision Hardened and ground Sine Bar in Wooden Case VERY NICE!!!! fowler?

  • Hadley, Pennsylvania, United States
  • Jun 7th
7/8 5C Collets Type: round Collet Size (Inch):.-875

7/8 5C Collets Type: round Collet Size (Inch):.-875

  • MA, United States
  • Jun 9th
NEW TSD AF118 COLLET 7/16" ROUND STK 4565

NEW TSD AF118 COLLET 7/16" ROUND STK 4565

  • Wadley, Alabama, United States
  • Jun 9th
1=Lot of 8-Pc`s Erickson 180DA Collets, Sizes as Noted

1=Lot of 8-Pc`s Erickson 180DA Collets, Sizes as Noted

  • Milford, Michigan, United States
  • Jun 9th
Vtg. J.H. Williams C Clamp No.Cc-404-4", Deep Throat 2-3/4" CC-404

Vtg. J.H. Williams C Clamp No.Cc-404-4", Deep Throat 2-3/4" CC-404

  • Kalamazoo, Michigan, United States
  • Jun 9th
Knu-Vise V-200 Used Verticle Clamps (QTY 2) Aircraft Tool

Knu-Vise V-200 Used Verticle Clamps (QTY 2) Aircraft Tool

  • Fenton, Missouri, United States
  • Jun 9th
Starrett 161-D Parallel Clamps

Starrett 161-D Parallel Clamps

  • Greenfield, Tennessee, United States
  • Jun 9th
Heinrich pneumatic 4" vise w/ micro adj ratchet

Heinrich pneumatic 4" vise w/ micro adj ratchet

  • Montebello, California, United States
  • Jun 9th
Machinist Or Toolmakers Hardened Vise (1 1/2" Capacity)

Machinist Or Toolmakers Hardened Vise (1 1/2" Capacity)

  • Wheatland, Pennsylvania, United States
  • Jun 9th
JAPAN ERON 3 " VISE

JAPAN ERON 3 " VISE

  • El Monte, California, United States
  • Jun 9th
Toolmex-Tmx 16.0" 3-Jaw "SET-TRU" Semi-Steel Body Lathe Chuck, 0.0006" T.I.R

Toolmex-Tmx 16.0" 3-Jaw "SET-TRU" Semi-Steel Body Lathe Chuck, 0.0006" T.I.R

  • Hamden, Connecticut, United States
  • Jun 9th
metal spinning mandrel,metal spinning form

metal spinning mandrel,metal spinning form

  • Bennington, New Hampshire, United States
  • Jun 9th
Allison Model 200 8” Metel Lathe Chuck 3 Jaw

Allison Model 200 8” Metel Lathe Chuck 3 Jaw

  • Independence, Kentucky, United States
  • Jun 9th
Leathercraft Kit-Dark Brown Journal

Leathercraft Kit-Dark Brown Journal

  • Hickory Hills, Illinois, United States
  • Oct 26th
Pro Series HHIP Pro Series by HHIP 3900-5550 ER-32 Coolant Thru Spring Collet,

Pro Series HHIP Pro Series by HHIP 3900-5550 ER-32 Coolant Thru Spring Collet,

  • USA, United States
  • Oct 26th
HHIP 3901-5033 Collet Chuck for ER-32, 100 mm Diameter

HHIP 3901-5033 Collet Chuck for ER-32, 100 mm Diameter

  • USA, United States
  • Oct 26th
HAAS CONTROLLER 5C 7 PIN CNC MILL ROTARY CONTROL INDEXER BLACK Not tested

HAAS CONTROLLER 5C 7 PIN CNC MILL ROTARY CONTROL INDEXER BLACK Not tested

  • Brea, California, United States
  • Nov 11th
Yuasa 8" Kurt style vice

Yuasa 8" Kurt style vice

  • Burlington, Connecticut, United States
  • Nov 11th
THREADWELL TANGI - MATIC RADIUS & ANGLE GRINDING WHEEL DRESSER 5431 MACHINE SHOP

THREADWELL TANGI - MATIC RADIUS & ANGLE GRINDING WHEEL DRESSER 5431 MACHINE SHOP

  • Xenia, Ohio, United States
  • Nov 11th
48"x40" Rolling Steel Assembly Set Up Work Table 1/4" Top 2"x2" Legs W/ Shelf

48"x40" Rolling Steel Assembly Set Up Work Table 1/4" Top 2"x2" Legs W/ Shelf

  • Middlebury, Indiana, United States
  • Nov 21st
JERGENS Serrated Master Key 1-11/16" x 1" x 1/2" x 1/2" x 3/8" hole WORK-HOLDING

JERGENS Serrated Master Key 1-11/16" x 1" x 1/2" x 1/2" x 3/8" hole WORK-HOLDING

  • Jeddo, Michigan, United States
  • Nov 21st
Huron KT8 EH Chuck Jaws - Lot of (3)

Huron KT8 EH Chuck Jaws - Lot of (3)

  • Loveland, Ohio, United States
  • Nov 21st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies