+ Post new Ad

BT Tool Holders

The average price for current category was $62.14 last month.

There are 3384 ads in this category.

CRITERION MICROBORE INDEXABLE BORE HEAD SL-202 CAT50 CT50 CT TOOL HOLDER LMSI

Criterion microbore indexable bore head sl-202 cat50 ct50 ct tool holder lmsi

  • Sun Valley, California, United States
  • Jan 30th
CRITERION MICROBORE SL-202CAT 50
DEVLIEG MICROBORE 50CT INDEXABLE BORE HEAD CAT50 CT50 CT TOOL HOLDER haas LMSI

Devlieg microbore 50ct indexable bore head cat50 ct50 ct tool holder haas lmsi

  • Sun Valley, California, United States
  • Jan 30th
DEVLIEG MICROBORE 50CTCAT 50
Royal 10215 Heavy Duty CNC Spindle Type Live Center Extended Point 5MT USA LMSI

Royal 10215 heavy duty cnc spindle type live center extended point 5mt usa lmsi

  • Sun Valley, California, United States
  • Jan 30th
ROYAL PRODUCTSLIVE CENTER5MT
PARLEC SHRINKER C50-126-FS CAT 50 CAT50 CT50 CT SHRINK FIT TOOL HOLDER LMSI

Parlec shrinker c50-126-fs cat 50 cat50 ct50 ct shrink fit tool holder lmsi

  • Sun Valley, California, United States
  • Jan 30th
PARLEC SHRINK FITC50-126-FSI.D. 1,250"
1,000" I.D. KEY PRODUCTS K-7931 CAT50 Right Angle Head 90 Degree CT50 CAT LMSI

1,000" i.d. key products k-7931 cat50 right angle head 90 degree ct50 cat lmsi

  • Sun Valley, California, United States
  • Jan 30th
KEY PRODUCTSK-79311" RIGHT ANGLE 90 DEGREE HEAD
KEY PRODUCTS K-7929 CAT50 Right Angle Head 90 Degree CT50 CAT 50 HAAS CNC LMSI

Key products k-7929 cat50 right angle head 90 degree ct50 cat 50 haas cnc lmsi

  • Sun Valley, California, United States
  • Jan 30th
KEY PRODUCTSK-7929RIGHT ANGLE 90 DEGREE HEAD
KENNAMETAL S16T-STUPR8 INDEXABLE BORING BAR TOOL HOLDER LATHE HAAS CNC MORI LMSI

Kennametal s16t-stupr8 indexable boring bar tool holder lathe haas cnc mori lmsi

  • Sun Valley, California, United States
  • Jan 30th
KENNAMETALBORING BARS16T-STUPR8 205
4" COMMAND C6S5-1500 19190-19 FACE SHELL MILL CAT 50 CAT50 CT50 TOOL HOLDER LMSI

4" command c6s5-1500 19190-19 face shell mill cat 50 cat50 ct50 tool holder lmsi

  • Sun Valley, California, United States
  • Jan 30th
COMMAND4" FACE / SHELL MILL HOLDERC6S5-1500
"NEW" RICHMILL COMPRESSION TAPPING TAP TOOL HOLDER CAT40 CT40-RTN22-2 CT LMSI

"new" richmill compression tapping tap tool holder cat40 ct40-rtn22-2 ct lmsi

  • Sun Valley, California, United States
  • Jan 30th
At Leopard Machine Sales, we pride ourselves on our zero re-stocking fee policy and accept returns within 7 days of purchase. We also assist with locating the right equipment for your needs, from boring mills to tube benders. Our knowledgeable staff strives to deliver quality products and services to meet your needs.
"NEW" NIKKEN CAT50-SLB36-120 CT50 CT CAT TOOL HOLDER TOOLHOLDER HAAS CNC LMSI

"new" nikken cat50-slb36-120 ct50 ct cat tool holder toolholder haas cnc lmsi

  • Sun Valley, California, United States
  • Jan 30th
NIKKENCAT50CAT50-SLB36-120
"NEW" NIKKEN CT40 MT3 MORSE TAPER TOOLHOLDER CT CAT40-MTA3-135 TOOL HOLDER LMSI

"new" nikken ct40 mt3 morse taper toolholder ct cat40-mta3-135 tool holder lmsi

  • Sun Valley, California, United States
  • Jan 30th
NIKKENCAT40-MTA3-135 CAT40 MT3 MORSE TAPER HOLDER
"NEW" PARLEC C50-16HP3 C5016HP3 CAT50 CAT 50 CT50 CT TOOL HOLDER TOOLHDER LMSI

"new" parlec c50-16hp3 c5016hp3 cat50 cat 50 ct50 ct tool holder toolhder lmsi

  • Sun Valley, California, United States
  • Jan 30th
PARLECCAT 50 TOOL HOLDERC50-16HP3
NEW! Lyndex Nikken BT-50 1" Balanced Endmill Holder 4" long B5006-1000

New! lyndex nikken bt-50 1" balanced endmill holder 4" long b5006-1000

  • Prospect Heights, Illinois, United States
  • Jan 30th
BRAND NEW! In its original packaging! Manufacturer: Lyndex Nikken Taper: BT-50 Diameter: 1" Gage Length: 4" Balanced: Yes
BT 40 Endmill Holder Lot (Maritool)

Bt 40 endmill holder lot (maritool)

  • Punta Gorda, Florida, United States
  • Jan 30th
Lot of 9 Maritool Endmill Holders. 1 pc. 1/8 x 2.5 1 pc.
BT 40 ER-16 Collet Toolholder (Maritool)

Bt 40 er-16 collet toolholder (maritool)

  • Punta Gorda, Florida, United States
  • Jan 30th
Maritool ER-16-120 Collet Toolholder Accepts all ER16 collets Made from alloy steel hardened to 54 - 56rc Balanced to G2.5 at 20,000 rpms Concentricity is less than .0001 at collet face All critical surfaces precision ground Coolant through capability Gage length is 120mm (4.75 inches) Internal screw included Rear thread for pull stud is M16 X 2.0 MariTool Part# is BT40-ER16-120
BT 40 ER-32 Collet Toolholder (Maritool)

Bt 40 er-32 collet toolholder (maritool)

  • Punta Gorda, Florida, United States
  • Jan 30th
Tool Holder accepts all ER32 collets Made from alloy steel hardened to 54 - 56rc Balanced to G2.5 at 20,000 rpms Concentricity is less than .0001 at collet face All critical tool holder surfaces precision ground Coolant through capability Gage length is 100mm (4.0 inches) Internal screw included Rear thread for pull stud is M16 X 2.0 MariTool Part# is BT40-ER32-100
BT40 DRILL CHUCK TOOL HOLDER (Maritool)

Bt40 drill chuck tool holder (maritool)

  • Punta Gorda, Florida, United States
  • Jan 30th
Drill Chuck is screwed from the back to ensure it does not come out during high cutting loads All critical surfaces precision ground Made from alloy steel hardened to 54 - 56rc Jaws are hardened to over 60rc Balanced to 15,000 rpms Gage length is 110mm (4.3 inches) This unit can hold shanks from .019-.511 (.5-13mm) Rear thread for pull stud is M16 X 2.0 Wrench included MariTool Part# is BT40-APU13-110
NICE ACME FETTE N-1 THREAD ROLLING HEAD W/ 5/8" SHANK 1/4" - 7/16" RANGE

Nice acme fette n-1 thread rolling head w/ 5/8" shank 1/4" - 7/16" range

  • Cleveland, Ohio, United States
  • Jan 30th
ACME FETTE THREAD ROLLING HEAD MODEL N-1 1/4" - 7/16" (M6-M12) ROLL RANGE 4° HELIX 5/8" SHANK Very good used condition, as pictured. Head has a set of 5/16"-24 rolls with it. Payment due within 48 hours of purchase.
"NEW" RICHMILL CT50-SL1.1/4-4.00 CAT50 CT 50 CAT TOOL HOLDER 1.250" CT50 LMSI

"new" richmill ct50-sl1.1/4-4.00 cat50 ct 50 cat tool holder 1.250" ct50 lmsi

  • Sun Valley, California, United States
  • Jan 30th
RICHMILLCAT 50 TOOL HOLDERCT50-SL1.1/4-4.00
5" LYNDEX FACE SHELL MILL CAT CAT50 CT50 TOOL HOLDER MITSUBISHI SG20R0506E LMSI

5" lyndex face shell mill cat cat50 ct50 tool holder mitsubishi sg20r0506e lmsi

  • Sun Valley, California, United States
  • Jan 30th
LYNDEX / MITSUBISHI5" FACE / SHELL MILL HOLDERSG20R0506E

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies