+ Post new Ad
Burndy - QPX442C - VERSITAP1000 Kcmil(Run)Num.2 Str(Tap) - (Pack of 1), US $354.55 – Picture 0
Burndy - QPX442C - VERSITAP1000 Kcmil(Run)Num.2 Str(Tap) - (Pack of 1), US $354.55 – Picture 0

Burndy - Qpx442c - Versitap1000 Kcmil(run)num.2 Str(tap) - (pack Of 1)

US $354.55

  • Clawson, Michigan, United States
  • Jun 7th
Open on mobile:
QR code
Our eBay Store Burndy - QPX442C - VERSITAP1000 Kcmil(Run)Num.2 Str(Tap) - (Pack of 1) Product Details Burndy - QPX442C - VERSITAP1000 Kcmil(Run)Num.2 Str(Tap) - (Pack of 1) - Burndy QPX442C WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.  
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Burndy
MPN QPX442C
UPC 781810344750

Directions

Similar products from Molds, Forms & Ejection Pins

Used 32 Oz Carafe Blow Mold

Used 32 Oz Carafe Blow Mold

  • Hialeah, Florida, United States
  • Jun 11th
Used Jar Blow Mold

Used Jar Blow Mold

  • Hialeah, Florida, United States
  • Jun 11th
Used Cosmetic Shampoo Blow Mold

Used Cosmetic Shampoo Blow Mold

  • Hialeah, Florida, United States
  • Jun 11th
Used 22 Oz Oil Blow Mold

Used 22 Oz Oil Blow Mold

  • Hialeah, Florida, United States
  • Jun 9th
Plastic Injection Mold lifting claw - Separator - Pick up near Detroit, Mi

Plastic Injection Mold lifting claw - Separator - Pick up near Detroit, Mi

  • Warren, Michigan, United States
  • Jun 9th
Mold & dies, DME Ejector Pin Counterbores CB 11 5/32" Dia. Pin

Mold & dies, DME Ejector Pin Counterbores CB 11 5/32" Dia. Pin

  • Hoffman Estates, Illinois, United States
  • Jun 9th
Unistrut P2401S Beam Clamp New (TB)

Unistrut P2401S Beam Clamp New (TB)

  • Napoleon, Ohio, United States
  • Jun 8th
STEP PIN SP7 10-1/2" Length Die & Mold Component Standard Ejector Step-Pin

STEP PIN SP7 10-1/2" Length Die & Mold Component Standard Ejector Step-Pin

  • Champlain, New York, United States
  • Jun 8th
20 pcs PCS COMPANY 6" long hardened core pins EDP CPH 7-6

20 pcs PCS COMPANY 6" long hardened core pins EDP CPH 7-6

  • Champlain, New York, United States
  • Jun 7th
Burndy - M-243 - CC-2 CART.90 RUN-4/0 STR. TAP-2/0 STR. - (Pack of 1)

Burndy - M-243 - CC-2 CART.90 RUN-4/0 STR. TAP-2/0 STR. - (Pack of 1)

  • Clawson, Michigan, United States
  • Jun 7th
(2) DME Tapered Interlock Male Injection Mold Round MT0811

(2) DME Tapered Interlock Male Injection Mold Round MT0811

  • Chillicothe, Missouri, United States
  • Jun 6th
DME EJECTOR PINS NITRIDED LOT OF (30) EX17M14 & (7) EX47M10

DME EJECTOR PINS NITRIDED LOT OF (30) EX17M14 & (7) EX47M10

  • Paramount, California, United States
  • Jun 5th
Lot Of (27) DME Mold/Die Ejector Pins EX11 EX9 EX13 EX5

Lot Of (27) DME Mold/Die Ejector Pins EX11 EX9 EX13 EX5

  • Springfield, Ohio, United States
  • Jun 4th
HUGE LOT OF ROYAL EJECTOR PINS-PERFORATORS (635 PICES) DME-HASCO

HUGE LOT OF ROYAL EJECTOR PINS-PERFORATORS (635 PICES) DME-HASCO

  • Shingle Springs, California, United States
  • Jun 4th
WeldTec 13N09 Alumina Nozzle No.5 5/16" SW-320 Lot of 9 New (TB)

WeldTec 13N09 Alumina Nozzle No.5 5/16" SW-320 Lot of 9 New (TB)

  • Napoleon, Ohio, United States
  • Jun 3rd
WeldTec 13N11 Nozzle No.7 7/16" SW-320 Lot of 10 New (TB)

WeldTec 13N11 Nozzle No.7 7/16" SW-320 Lot of 10 New (TB)

  • Napoleon, Ohio, United States
  • Jun 3rd
LOC-LINE 41485 Flat 5 Hole Nozzle,PK4

LOC-LINE 41485 Flat 5 Hole Nozzle,PK4

  • Minooka, Illinois, United States
  • Jun 3rd
Cat on Jack-O-Lantern Pumpkin Halloween Blow Mold For Plastic Molds, Collectible

Cat on Jack-O-Lantern Pumpkin Halloween Blow Mold For Plastic Molds, Collectible

  • Seymour, Indiana, United States
  • Jun 2nd
used 1/2 gallon blow mold

used 1/2 gallon blow mold

  • Chula Vista, California, United States
  • Jun 2nd
Owl On Jack-O-Lantern Pumpkin Halloween Blow Mold For Plastic Molds, Collectible

Owl On Jack-O-Lantern Pumpkin Halloween Blow Mold For Plastic Molds, Collectible

  • Seymour, Indiana, United States
  • May 31st

People who viewed this item also vieved

Cartridge Heater 1/4"diameter x 1 1/2"long,230/240volt 160w

Cartridge Heater 1/4"diameter x 1 1/2"long,230/240volt 160w

  • Wendel, Pennsylvania, United States
  • Jan 30th
Cartridge Heater 1/4"diameter x 2 1/2"long,230/240volt 315w

Cartridge Heater 1/4"diameter x 2 1/2"long,230/240volt 315w

  • Wendel, Pennsylvania, United States
  • Jan 30th
Cartridge Heater 1/4"diameter x 2 1/2"long,230volt 125w w/internal thermocouples

Cartridge Heater 1/4"diameter x 2 1/2"long,230volt 125w w/internal thermocouples

  • Wendel, Pennsylvania, United States
  • Jan 30th
Cartridge Heater 1/4"diameter x 2 1/2"long,230/240volt 250w

Cartridge Heater 1/4"diameter x 2 1/2"long,230/240volt 250w

  • Wendel, Pennsylvania, United States
  • Jan 30th
Cartridge Heater 1/4"diameter x 3"long,230volt 200w with internal thermocouples

Cartridge Heater 1/4"diameter x 3"long,230volt 200w with internal thermocouples

  • Wendel, Pennsylvania, United States
  • Jan 30th
Ceramic Cartridge Heater for 3D Printer Prusa Mendel 12v 40w 1m *ships form US!*

Ceramic Cartridge Heater for 3D Printer Prusa Mendel 12v 40w 1m *ships form US!*

  • Denver, Colorado, United States
  • Jan 30th
2 x 2mm Thick Crystal Clear Plastic Perspex Acrylic Plexiglass A4 Rigid Sheets

2 x 2mm Thick Crystal Clear Plastic Perspex Acrylic Plexiglass A4 Rigid Sheets

  • Wickford, Essex, United Kingdom
  • Jan 30th
Taulman t-glase Clear filament for 3D printing - FDA Food-Safe - 1lb 1.75mm

Taulman t-glase Clear filament for 3D printing - FDA Food-Safe - 1lb 1.75mm

  • Elk Grove, California, United States
  • Jan 30th
Taulman t-glase Blue filament for 3D printing - FDA Food-Safe - 1lb 1.75mm

Taulman t-glase Blue filament for 3D printing - FDA Food-Safe - 1lb 1.75mm

  • Elk Grove, California, United States
  • Jan 30th
Taulman t-glase Red filament for 3D printing - FDA Food-Safe - 1lb 1.75mm

Taulman t-glase Red filament for 3D printing - FDA Food-Safe - 1lb 1.75mm

  • Elk Grove, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies