bushing nut for sale, brand-new and used.

New Honeywell 5K ohm Potentiometer Part number: 53C15K Military grade potentiometer. See below for part number decode. Sale is for one (1) new potentiometer.

New Clarostat 1.5K ohm Wire Wound 4 Watt Potentiometer Part number: 58C1 See below for part number decode. Sale is for one (1) new potentiometer. No other parts included in sale.

New Honeywell 5K ohm Potentiometer Part number: RV4NAYSD502A Military grade potentiometer. See below for part number decode. Sale is for one (1) new potentiometer.

New Honeywell 10K ohm Potentiometer Part number: RV4NAYSD103A Military grade potentiometer. See below for part number decode. Sale is for one (1) new potentiometer.

New Honeywell 2K ohm Potentiometer Part number: RV4NAYSD202A Military grade potentiometer. See below for part number decode. Sale is for one (1) new potentiometer.

New Clarostat 25K ohm Potentiometer Part number: RV4NAYSD253A Military grade potentiometer. See below for part number decode. Sale is for one (1) new potentiometer.

New Clarostat 100K ohm Potentiometer Part number: RV4NAYSD104A Military grade potentiometer. See below for part number decode. Sale is for one (1) new potentiometer.

New Clarostat 2K ohm Potentiometer Part number: RV4NAYSD202A Military grade potentiometer. See below for part number decode. Sale is for one (1) new potentiometer.

New Clarostat 2.5K ohm Wire Wound Mil Spec Potentiometer Part number: RA20NASD252A American made, wire wound, mil spec potentiometer. See below for part number decode. Meets mil spec: MIL-R-19 Sale is for one (1) new potentiometer.

Radio Shack Archer 275-1386, 2P6T Rotary Switch, 6 position Solder terminals Ratings: 300ma @ 120vac Mounting hole: 3/8 inch diameter. Threaded bushing is 0.25 inch long. Mounting hardware: Nut, washer Dimensions: Shaft length: 1 5/16 inches (approx.) Shaft diameter: 1/4 inch Body diameter: 1 1/4 inch at widest point, 1 inch at narrowest point (approx.) Length behind panel (to tip of longest terminals): 13/16 inch (approx.) New old stock.

Alcoswitch MPS-203R DPDT Momentary Pushbutton Switch, with 9 C-22 Caps - You only need one for each switch... unless you lose one. So, this will give you eight extra caps, for the other switches on your shelf that are missing caps.

AlcoSwitch MRC-3-3S 3P3T miniature Rotary Switch Solder terminals Ratings: 500ma @ 125vac Mounting hole: 0.25 inch diameter. Threaded bushing is 0.25 inch long.

6 -3/4 couplings, 5 -3/4 conn, 3 -3/4 flex conn,  few 1/2- fittin

THIS ITEM IF FOR 1 (ONE): ROTARY SWITCH 1 POLE -- 17 POSITIONS (1 pole/deck, 1 deck) 20 DEGREE INDEXING, ADJUSTABLE STOPS NON-SHORTING CONTACTS (break before make) PHENOLIC INSULATION Contacts are silver plated and have some tarnish. Made by CENTRALAB (CRL) IN USA PART # PA-3001

AT A GLANCE***Therma Level Gauge***

THIS ITEM IF FOR 1 (ONE): ROTARY SWITCH 2 POLES -- 12 POSITIONS (2 poles/deck, 1 deck) 15 DEGREE INDEXING, FIXED STOP NON-SHORTING CONTACTS (break before make) Contacts are silver plated and are tarnished. They could be used for pc mount or easily soldered to. Made by Ledex DIM: 2 1/4" OD X 7/8" D 3/8-32 b

Potentiometer, 10-Turn, 10K? ±5%, 2W, Panel Mount, Solder Lug Bourns #3590S-2-103 FEATURES Bushing Mount Metal Shaft and Bushings Wirewound Solder Lugs Sealable (Full Body Seal) Designed For Use In HMI Applications SPECIFICATIONS ELECTRICAL CHARACTERISTICS Standard Resistance: 10K Ohms Total Resistance Tolerance: ±5 % Independent Linearity: ±0.25 % Effective Electrical Angle: 3600 ° +10 °, -0 ° Absolute Minimum Resistance: 1 Ohm

THIS ITEM IS FOR ONE (1): ALCO SWITCH (TYCO) SUB-MINIATURE PUSHBUTTON SWITCH ALCO P/N: MPA-103C SPST (single pole-single throw) N.O., OFF - (ON) momentary. Bushing, 1/4" RATED: 3 AMPS 125vAC Operating temp.: -20 to +70 degree C. MADE IN THE JAPAN New, old stock, with lock washer and finish mounting nut.