bushing nut for sale, brand-new and used.

LOT OF 1 (ONE): BOURNS 3852Z-AB4-504A PANEL MOUNT POTENTIOMETER 500K OHM CERMET 2 WATTS LINEAR TAPER SINGLE TURN 3/4" DIAMETER, 1/8" SHAFT X 5/16"L, D flat. 1/4" BUSHING SOLDER LUG TERMINALS New, old stock, with mounting nut and lockwasher. Buyer pays S&H, $2.95 in USA, $7.95 worldwide.

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR: 1 (ONE): CTS POTENTIOMETER AS FOLLOWS: 5K (5,000) OHM 2 WATT WIRE WOUND LOCKING SCREWDRIVER ADJUST LINEAR TAPER APPROX. DIM: 1 1/4" OD X 5/8" behind panel, 3/8" bushing Refurbished, tested good and guaranteed, with lockwasher, mounting nut, and locking nut.

BOURNS P/N 82C1A-E12C26 POTENTIOMETER 2.5 MEG OHM 1 WATT 10% AUDIO TAPER CERMET RESISTANCE ELEMENT 5/8" SQUARE, SINGLE TURN, SCREW-DRIVER ADJUST TERMINALS ARE J-HOOKS 1/4" BUSHING, WITH MOUNTING NUT AND LOCK WASHER. Each item is for 1 pot. New, old stock.

New unused stock from my company that used to sell an industrial product that used these potentiometers. They are well made and were 100% reliable in our application. The pots were manufactured by Clarostat before the brand was acquired by Honeywell.

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (ONE): BOURNS 3851C-282-103B PANEL MOUNT POTENTIOMETER 10K OHM CONDUCTIVE PLASTIC 1 WATTS LINEAR TAPER SINGLE TURN 3/4" DIAMETER, 1/8" SHAFT X 5/8"L, 1/4" BUSHING SOLDER LUG TERMINALS New, old stock, with mounting nut and lockwas

Condition: New; old stock. Sold as is. Description: Precision Wirewound Potentiometer 10K

LOT OF 1 (ONE): BOURNS 3852A-282-103A PANEL MOUNT POTENTIOMETER 10K OHM CERMET 2 WATTS LINEAR TAPER SINGLE TURN 3/4" DIAMETER, 1/4" SLOTTED SHAFT X 1/2"L, 3/8" BUSHING SOLDER LUG TERMINALS REMOVED FROM NEW EQUIP. with mounting nut and lock washer. These pots have been tested and guaranteed good.

8K Linear Taper Potentiometer With Switch 0.2 Watt 10% Tolerance 6mm Split Knurled Shaft 260° Shaft Rotation Threaded Bushing: 6.85mm or 9/32" Fits 9/32" mounting hole. Shaft Length:14.5mm or 9/16" Bushing Length: 6.75mm or 17/64" OAL: 31mm or 1-1/4" (includes solder tabs) Body Diameter: 17mm or 21/32" Body Height(To Bushing): 10.25mm or 13/32" (includes solder tabs) Note: measurements are approximate. Includes washer and nut.

THIS ITEM IS A: BOURNS KNOBPOT, 10-TURN PRECISION POTENTIOMETER: (ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) MFG: BOURNS "KNOBPOT", CLOCKFACE READOUT, 10-TURN P/N: 3640S-1-103 10K OHM (10,000), WIREWOUND RES +/- : 5% RATED: 2.5 WATT DIM: 1 1/4" DIA X 1 1/2" LONG 3/8" BUSHING Refurbished, with washer, mounting nut. All pots

THIS ITEM IS FOR (ONE), SUB - MINIATURE POTENTIOMETER. SPECS: 1K OHM LINEAR TAPER CARBON ELEMENT Stainless-Steel Shaft - 1/8" OD X 1/2"L w/screwdriver slot on end. Body dim, approx.: 3/8" OD X 5/8" Deep including leads, 1/4" bushing mount.

** ALL POTS I SELL ARE TESTED AND GUARANTEED GOOD ** LOT OF 1 (one): CTS VINTAGE POTENTIOMETER W/SWITCH 500K OHM (500,000) +/- 20%, AUDIO TAPER SWITCH: TYPE GC RATED 3A - 125vAC, 1A - 250vAC SPST - N.O. (looking at shaft, full CW, is CLOSED, ON. CCW to max rotation is open, off.

Potentiometer Clarostat 58 Series Wire Wound 4 Watt with Switch 58 Series offers a rugged construction and a wirewound element Element Type: Wire Wound Terminal Type: Solder lug Power Rating: 4 W Resistance Range: 25 Ohm to 25 kOhm Bushing Type: Locking, Standard Rotational Life: 25,000 cycles Potentiometer Type: Industrial Electrical Taper: Linear Shaft Length: 2 Inch Mount: 7/16" chassis hole with mounting nut. See pictures for additional details.

Unused NOS Bourns 82B1D-B20-B15L 10K conductive plastic type linear potentiometer. Slotted shaft for screwdriver adjustment, locking nut prevents tampering and accidental mis-adjustment. Top quality potentiometer for all versions of UREI and UA LA-3A limiting amplifier.

Lot of 10 unused NOS Bourns 82B1D-B20-B15L 10K conductive plastic type linear potentiometer. Slotted shaft for screwdriver adjustment. Optional locking nut (not included) prevents tampering and accidental mis-adjustment.

THIS ITEM IS A: BOURNS KNOBPOT, 10-TURN PRECISION POTENTIOMETER: (ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) MFG: BOURNS "KNOBPOT", CLOCKFACE READOUT, 10-TURN P/N: 3600S-1-103 10K OHM (10,000) RES +/- : 5% RATED: 1.5 WATT DIM: 3/4" X 1" in front of panel 3/8" BUSHING Refurbished with washer, mounting nut. All pot

8K Linear Taper Potentiometer 0.2 Watt 10% Tolerance 6mm Split Knurled Shaft 260° Shaft Rotation Threaded Bushing: 6.85 mm or 9/32" Fits 9/32" mounting hole. Shaft Length: 14.5mm or9/16" Bushing Length: 6.75mm or 17/64" OAL: 31mm or 1-1/4" (includes solder tabs) Body Diameter: 17mm or 21/32" Body Height(To Bushing): 10.25mm or 13/32" (includes solder tabs) Note: measurements are approximate. Includes washer and nut.

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (ONE): CLAROSTAT POTENTIOMETER AS FOLLOWS: 5K (5,000) OHM 2 WATT WIRE WOUND LOCKING SCREWDRIVER ADJUST LINEAR TAPER P/N 43C2-5K APPROX. DIM: 1 1/8" OD X 5/8" behind panel, 3/8" bushing New, old stock, tested good and guaranteed, w

10K / 100K Dual Linear Potentiometer 10K / 100K Dual Potentiometer With Solder Lugs 10% Tolerance 100K Top---10K Bottom 1/4" Half-Moon Shaft Bushing: 3/8" Shaft Length: 5/16" Diameter: 15/16" / 24mm Comes with hardware; nut and washer. US Buyers Please Note: Returns and exchanges are accepted within 14 days of the receipt of your item. Please check your item after you receive it, no

*Over Stock Item / New Old Stock* Taiwan Alpha 16MM Mini Pot w/Nut and WasherSolder Lug Terminals10K Linear TaperShaft Length 15mm (0.59in)Bushing Length: 6.35mm (0.25in) Shaft Dia 6.35mm (0.25in)Case Dia 16mm (0.63in)

Description Silicon Insulators, Bushing, Screws and Nuts Assorted Kit. 1