bushing wall for sale, brand-new and used.

You are purchasing 15 Heyco Strain Relief Bushings that are Heyco Part Number Strain Relief 7P-2. The bushing is designed for a panel thickness of .125 inches. Straight-Thru for Round Cables .660" (15,9 mm) to .750" (19,0 mm) Mounting Holes •Protects the lifeline of your electric/electronic products by absorbing the forces of pull, push, and twist that may be exerted on the flexible power cord.

You are purchasing 15 Heyco Strain Relief Bushings that are Heyco Part Number 7N-2. The bushing is designed for a panel thickness of .062 inches. Straight-Thru for Round Cables .660" (15,9 mm) to .750" (19,0 mm) Mounting Holes •Protects the lifeline of your electric/electronic products by absorbing the forces of pull, push, and twist that may be exerted on the flexible power cord.

You are purchasing 15 Heyco Strain Relief Bushings that are Heyco Part Number Strain Relief 6P3-4. The bushing is designed for a panel thickness of .125 inches. Straight-Thru for Round Cables .550" (15,9 mm) to ..625" (19,0 mm) Mounting Holes •Protects the lifeline of your electric/electronic products by absorbing the forces of pull, push, and twist that may be exerted on the flexible power cord.

700-201 Robertshaw UPC Number 662013631481/2" SNAP ACTING GAS VALVE W/36" CAP. 7000AS The 700-200 Series snap-action and snap-throttle (modulating) hydraulic controls are combination gas valves, thermostatically operated by a remote temperature sensing bulb.Two types of temperature adjustment models are available. One type is a single capillary model with the temperature adjustment knob on the gas valve itself.

New in the original box Robertshaw 700-413 gas valve Robertshaw's 2-stage 24 volt combination gas valves, standing pilot as well as intermittent pilot models, feature: reliability, performance, flexibility, and easy installation all in one compact control. These valves feature a manual valve (gas cock), inlet/outlet screens, pilot gas filter, and pilot adjustment key.

Used item. Removed from service. Units are in very good condition.

You are buying1Deburring ,Polishing and blending wheel grit 80 S.C. MEDIUM DENSITY (SILICON CARBIDE WILL DE BURR ALMOST ALL METALS AND GLASS) ?

Amada - Promecam Upacting Backgauge Designed. All mounting is ready on Center Line. Note: Can be used on other style Brakes.

THIS IS A PRECISION 12" SQUARE TOMBSTONE FOR HOLDING WORK ON A CNC HMC,IT IS 20" HIGH, THE BASE IS 19.25 SQ AND 2" THICK AND HAS 45 HOLES PER SIDE. WALL THICKNESS IS 2 INCH,,ALL HOLES HAVE A .500 HARDENED BUSHING 5/8 DEEP AND A 1/2 X 13 HELI COIL, SO YOU CAN LOCATE OR HOLD DOWN ON ANY HOLE, AND ARE ON 2.000 CENTERS. REPLACEMENT COST IS OVER 4000.00 DOLLARS.