(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR: 1 (one) REON, 1/2 WATT, POTENTIOMETER RV6-SIZE, SD ADJUST, LOCKING 3.5K (3,500) OHM, 1/2 WATT LINEAR TAPER DIM: 1/2" OD X 5/8" DEEP BUSHING: 1/4-32 X 1/2"L SHAFT: 1/8" X 1/8"L, SLOTTED
(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR: 1 (one) ALLEN-BRADLEY, 1/2 WATT, POTENTIOMETER RV6-SIZE, SD ADJUST, LOCKING 250K (250,000) OHM, 1/2 WATT LINEAR TAPER DIM: 1/2" OD X 5/8" DEEP BUSHING: 1/4-32 X 1/2"L SHAFT: 1/8" X 1/8"L, SLOTTED
(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR: 1 (one) ALLEN-BRADLEY, 1/2 WATT, POTENTIOMETER RV6-SIZE, SD ADJUST, LOCKING 2.5M (2,500,000) OHM, 1/2 WATT LINEAR TAPER DIM: 1/2" OD X 5/8" DEEP BUSHING: 1/4-32 X 1/2"L SHAFT: 1/8" X 1/8"L, SLOTTED
(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR: 1 (one) ALLEN-BRADLEY, 1/2 WATT, POTENTIOMETER RV6-SIZE, SD ADJUST, LOCKING 2.5K (2,500) OHM, 1/2 WATT LINEAR TAPER DIM: 1/2" OD X 5/8" DEEP BUSHING: 1/4-32 X 1/2"L SHAFT: 1/8" X 1/8"L, SLOTTED
(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR: 1 (one) CTS, 1/2 WATT, POTENTIOMETER RV6-SIZE, SD ADJUST, LOCKING 500K (500,000) OHM, 1/2 WATT LINEAR TAPER DIM: 1/2" OD X 5/8" DEEP BUSHING: 1/4-32 X 1/2"L SHAFT: 1/8" X 1/8"L, SLOTTED
(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR: 1 (one) CTS, 1/2 WATT, POTENTIOMETER RV6-SIZE, SD ADJUST, LOCKING 10K (10,000) OHM, 1/2 WATT LINEAR TAPER DIM: 1/2" OD X 5/8" DEEP BUSHING: 1/4-32 X 1/2"L SHAFT: 1/8" X 1/8"L, SLOTTED
New Clarostat / Honeywell 5K ohm 2 Watt Wire Wound Potentiometer Part number: RA20NASD502A Military spec, 2 watt, wire wound potentiometer. See below for part number decode. Sale is for one (1) new potentiometer.
New Clarostat / Honeywell 10K ohm Potentiometer Part number: RV4NAYSD103A 53C310K Military grade potentiometer. See below for part number decode. Sale is for one (1) new potentiometer.
THIS ITEM IS ONE SWITCH AS FOLLOWS: C&K PUSH BUTTON SWITCH, MINIATURE, PANEL MOUNT SPDT (single pole - double throw) ON - (OFF) ON-OFF MOMENTARY C&K P/N: 8125SHZBE POSITIVE TACTILE FEEL RATED: 0.4 VA @ 20V AC or DC, gold plated contacts. MOUNTING BUSHING: 1/4-40 X 1/4"L DIM: 1/2"H X 1/2"W X 1/4"D GOLD PLATED SOLDER TERMIN
Clarostat 5K OHM Pot Audio Taper Potentiometer with an ALTERNATING Momentary DPST Switch (2 Pole, 1 Throw) 1 "Buy it Now" is for 1 Pot When the button is pressed, one pole is closed, when released, the other pole closes. Can be wired like a SPST with either NC or NO contacts, or you can wire both poles at the same time (One is open while the other is closed) Specifications: Brand: Clarostat Part: 1320-3027-7 Resistance: 5K OHM Resistance Type: Audio Taper Tolerance: 5
Radio Shack Archer 275-1386, 2P6T Rotary Switch, 6 position Solder terminals Ratings: 300ma @ 120vac Mounting hole: 3/8 inch diameter. Threaded bushing is 0.25 inch long. Mounting hardware: Nut, washer Dimensions: Shaft length: 1 5/16 inches (approx.) Shaft diameter: 1/4 inch Body diameter: 1 1/4 inch at widest point, 1 inch at narrowest point (approx.) Length behind panel (to tip of longest terminals): 13/16 inch (approx.) New old stock.
THIS ITEM IF FOR 1 (ONE): ROTARY SWITCH 2 POLES -- 12 POSITIONS (2 poles/deck, 1 deck) 15 DEGREE INDEXING, FIXED STOP NON-SHORTING CONTACTS (break before make) Contacts are silver plated and are tarnished. They could be used for pc mount or easily soldered to. Made by Ledex DIM: 2 1/4" OD X 7/8" D 3/8-32 b
THIS ITEM IS FOR ONE (1): ALCO SWITCH (TYCO) SUB-MINIATURE PUSHBUTTON SWITCH ALCO P/N: MPA-103C SPST (single pole-single throw) N.O., OFF - (ON) momentary. Bushing, 1/4" RATED: 3 AMPS 125vAC Operating temp.: -20 to +70 degree C. MADE IN THE JAPAN New, old stock, with lock washer and finish mounting nut.
FREE SHIP United States,For Int'l shipping, the second and the third pack is FREE SHIP. 5 Inch / 125mm Diamond Turbo Segmented Saw Blade for Granite, Concrete, Tile, Stone, 10 PIECES. This is for 20 PIECES of 5 inch Diamond Segment Blade.10mm Segment Height.
Very seldom used Ramset Powder Fastening Systems, Cobra .27 Caliber Strip Tool with 2-1/2-inch Pin Capacity ( 3-inch with washer) - Fair amount of SHOT & PINS INCLUDED!! This gun is a semi-automatic tool for general construction and remodeling jobs. Fastens up to 3 inch drive pins with washer.
INGERSOLL RAND COPPER TUBE 26 1/4 INCH LONG .375 OD .245 ID .065 WALL THICKNESS PART NUMBER: 3W45715T6 Check out my other items! We combine shipping for multiple items. Please contact us with inquiries.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
