You are considering a Strippit model 8BN-3, C-frame type punch and die holder. This frame is used and is in fair overall condition. Body of frame has several scratch marks, paint wear and surface rust.
You are considering a Strippit model 8BN-5, C-frame type punch and die holder. This frame is used and is in fair overall condition. Body of frame has several scratch marks, paint wear and surface rust.
You are considering a Strippit model 4BN-3, C-frame type punch and die holder. This frame is used and is in fair overall condition. Body of frame has several scratch marks, paint wear and surface rust.
You are considering a Strippit model 4BN-3, C-frame type punch and die holder. This frame is used and is in fair overall condition. Body of frame has several scratch marks, paint wear and surface
You are considering a Strippit model 8BN-3, C-frame type punch and die holder. This frame is used and is in fair overall condition. Body of frame has several scratch marks, paint wear and surface rust.
You are considering a Strippit model 4BN-3, C-frame type punch and die holder. This frame is used and is in fair overall condition. Body of frame has several scratch marks, paint wear and surface rust.
Aluminum Offset Angle 3/4” x 1-1/2” x 8 in, 1/16 in thick, .75 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick.
Aluminum Angle 3/4 x 3/4 x 48 in, 1/8 in thick, NEW!, .75IN, USA! Description – These are fabricated from a 3003 Aluminum Alloy and measure 3/4 x 3/4 x 48 x 1/8 thick. We ship from three locations including NC, OH, and sometimes from our truck.
Aluminum Angle 1-1/2” x 1-1/2” x 21.5 in, 1/16 in thick, 1.5 IN x 1.5 IN, NEW! Description – These are left over from a project. The length varies from 21.5 to 22in long.
Aluminum Angle 1-1/2” x 1-1/2” x 24 in, 1/8 in thick, 1.5 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
Aluminum Angle 1/2 ” x 1/2 ” x 24 in, 1/16 in thick, .5 IN x .5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
Aluminum Anodized Angle 3/4 x 3/4 x 48 in, 1/16 in thick, High Strength Description – This angle is a higher strength / anodized version of our popular 3/4in aluminum angle. Almost everything about it is better. It is substantially higher strength, higher corrosion resistance, and lighter weight.
Cigar Box Saddle / Bridge Aluminum Angle Stock for DIY guitar, fiddle, banjo, Description – This is for anyone who wants to make their own Saddle / Bridge for a Cigar Box instrument. They measure 5/8 x 1-1/2 x 1/8 thick x 48 inch long and you can cut to any length you desire or we can cut for a fee.
Aluminum Offset Angle 3/4” x 1-1/2” x 48 in, 1/16 in thick, .75 IN x 1.5 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. They are very slightly less than a 1/16 of an inch thick.
Aluminum Angle 3/4 x 3/4 x 24 in, 1/16 in thick Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed. They are slightly less than a 1/16 of an inch thick.
Aluminum Angle 5/8” x 5/8” x 48 in, 1/16 in thick, 5/8 IN x 5/8 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
Aluminum Offset Angle 1” x 2” x 48 in, 1/16 in thick, 1 IN x 2 IN, NEW! Description – I originally fabricated these angles for the building of solar panels and eventually realized other people had lots of other uses for them. I been selling these since Feb of 2013 and will keep making them as needed.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
