What You'll get: Sony SNC-RZ30N Network IP Security Surveillance Web Color Cam Camera 25x Zoom Power Adapter is NOT included. Other Accessories that are Not pictured or mentioned under "What You'll Get" are
This IBC Tank Adaptor (Adapter) Will Convert The 2" CAM LOCK (Big CONCAVE Groove on your Valve behind the threads or present without threads) to a BRASS 1/4 Turn Garden Hose BALL VALVE/FAUCET Fitting!! This is a great way to stop beating your knuckles on the cage of an IBC Tank.
This is a IBC tote tank adapter that goes on your tote valve. Coarse 2" European thread to 2" cam lock or (quick disconnect coupler). The Male threads you see on the end can accept a dust cap if needed.
Handy around the Farm where you don't have access to electric power. Honda Engine , can pump a lot of water in a hurry. NEW and has fittings for "Cam Lock" adapter.
2 HP FTI SS Centrifugal Pump with Fulflo Filter on SS Base FTI pump - 2 Hp Leeson motor - 3450 rpm - 208/230/460 Volt / 60 Hz / 3 Phase Electrical - 1.5” x 1.5“ SS NPT inlet / discharge fittings with Cam-Lock adapter fittings - SS impellor & contact parts FulFlo Filter - SS construction - 6” dia. x 14” High (nominal)
Used- 6 5/8" chuck adapter plate cam-lock 3/4" locking pins, pins are 4.150 on center 2.250 pass through hole. Has a little light surface rust, will clean up easily. Please make sure this is what you need prior to bidding.
Used- 7 7/8" chuck adapter plate cam-lock 3/4" locking pins, pins are 4.150 on center 2.250 pass through hole. Please make sure this is what you need prior to bidding. Don't miss out.
Old Stock Royal Products Cam-Lock Collet Adapter For A 5C Collet Closer A5 & D1-5 Brand: Royal Products I.D.: 1.41" Cam-Lock Diameter: .75" Desciprion: This Is A Cam-Lock Collect Adapter From A 5C Pneumatic Closer For Manual Lathes & Grinders With A Spindle Nose Type A-5 or D1-5 Our Inventory #: F10778A Sold As Is Where Is, with no implied warranty or guarantee. SHIPPING: Buyer is responsible for all shipping costs.
2 HP FTI SS Centrifugal Pump with Fulflo Filter on SS Base FTI pump - 2 Hp Leeson motor - 3450 rpm - 208/230/460 Volt / 60 Hz / 3 Phase Electrical - 1.5” x 1.5“ SS NPT inlet / discharge fittings with Cam-Lock adapter fittings - SS impellor & contact parts FulFlo Filter - SS construction - 6” dia. x 14” High (nominal)
Tired of using a big torch that the manufacturing companies (Longevity) and (Eastwood) use on there Tig welding machines. This adapter allows you to use a Wp9 or 20 size torch with a cam lock dins connection with gas through. Air cooled or water cooled .
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.