+ Post new Ad
Carbide tip for center or locator solid cone 5/8 x 1.1, US $37.00 – Picture 0
Carbide tip for center or locator solid cone 5/8 x 1.1, US $37.00 – Picture 1
Carbide tip for center or locator solid cone 5/8 x 1.1, US $37.00 – Picture 0
Carbide tip for center or locator solid cone 5/8 x 1.1, US $37.00 – Picture 1

Carbide Tip For Center Or Locator Solid Cone 5/8 X 1.1

US $37.00

  • Warren, Michigan, United States
  • Jan 30th
Open on mobile:
QR code
11E235108 up for sale is a solid carbide cone blank for use on a carbide tipped center or other fixture applications, these have a ground OD at 0.623 dia, the OAL is 1.109 the rest of the blank is un ground, the straight part is 0.611 long, the angle is 60 degree included rough, the length of the linear part of the angle is 0.548 long x 60 degree included angle nice new solid carbide tip for many applications, these sell for $50 to $60 each in the local tool supply places, buyer to pay calculated shipping and packing to your USA locations, see our store for more stuff like this, Thank you RWK

Directions

Similar products from Other Workholding Tools

3-3/4" OAL Left Hand Jaw

3-3/4" OAL Left Hand Jaw

  • Peoria, Illinois, United States
  • Jan 30th
Peterson Tool Company L.X5614.220.00.10 Clamping Jaw

Peterson Tool Company L.X5614.220.00.10 Clamping Jaw

  • Peoria, Illinois, United States
  • Jan 30th
Lot of 4 3-3/4" Fingers

Lot of 4 3-3/4" Fingers

  • Peoria, Illinois, United States
  • Jan 30th
Lot of 4 Holding Fingers

Lot of 4 Holding Fingers

  • Peoria, Illinois, United States
  • Jan 30th
Pair of Giddings & Lewis 223-5611-004 Grippers

Pair of Giddings & Lewis 223-5611-004 Grippers

  • Peoria, Illinois, United States
  • Jan 30th
Lot of 2 OD 2-1/8" Nests

Lot of 2 OD 2-1/8" Nests

  • Peoria, Illinois, United States
  • Jan 30th
Lot of 3 Fingers

Lot of 3 Fingers

  • Peoria, Illinois, United States
  • Jan 30th
Lot of 2 4-49279 Grippers

Lot of 2 4-49279 Grippers

  • Peoria, Illinois, United States
  • Jan 30th
Set of 4 Paravis 3" X 1" X 1" Fingers

Set of 4 Paravis 3" X 1" X 1" Fingers

  • Peoria, Illinois, United States
  • Jan 30th
FESTO SOLENOID VALVE MTH 5/2-7,0-L-S-VI NEW MTH5270LSVI

FESTO SOLENOID VALVE MTH 5/2-7,0-L-S-VI NEW MTH5270LSVI

  • Yale, Michigan, United States
  • Jan 30th
Kennametal/Erickson 3-10-079-501 S-J-3 500 Shank Holder

Kennametal/Erickson 3-10-079-501 S-J-3 500 Shank Holder

  • Peoria, Illinois, United States
  • Jan 30th
No. 1 Rhodes Horizontal Shaper Machine (Inv.24834)

No. 1 Rhodes Horizontal Shaper Machine (Inv.24834)

  • Portland, Connecticut, United States
  • Jan 30th
Giddings & Lewis 241 5712 179 LH Barrell Jaw

Giddings & Lewis 241 5712 179 LH Barrell Jaw

  • Peoria, Illinois, United States
  • Jan 30th
RBF Products Adjustable 16C Collet Stop made in the USA

RBF Products Adjustable 16C Collet Stop made in the USA

  • Loves Park, Illinois, United States
  • Jan 30th
Lot of 3 Source Plan Sanders Tools .815 X .375 X .750 Gripper Set

Lot of 3 Source Plan Sanders Tools .815 X .375 X .750 Gripper Set

  • Peoria, Illinois, United States
  • Jan 30th
OWATONNA TOOL CO. SPANNER WRENCH 885 ~ New no box

OWATONNA TOOL CO. SPANNER WRENCH 885 ~ New no box

  • Sparta, Michigan, United States
  • Jan 30th
Etamic 080455-01-0107 Workholding Nest

Etamic 080455-01-0107 Workholding Nest

  • Peoria, Illinois, United States
  • Jan 30th
Carr Lane CL-12-BLPT-1.50 Ball Lock Pin NEW

Carr Lane CL-12-BLPT-1.50 Ball Lock Pin NEW

  • Wilmington, Ohio, United States
  • Jan 30th
SMC MHS3-40D-F9BL-X2037 Parallel Style Air Gripper

SMC MHS3-40D-F9BL-X2037 Parallel Style Air Gripper

  • Peoria, Illinois, United States
  • Jan 30th
ENERPAC WFC72 HYDRAULIC WORK SUPPORT CARTRIDGE NEW CONDITION IN BOX

ENERPAC WFC72 HYDRAULIC WORK SUPPORT CARTRIDGE NEW CONDITION IN BOX

  • United States
  • Jan 30th

People who viewed this item also vieved

HARDINGE 22SC EMERGENCY COLLET

HARDINGE 22SC EMERGENCY COLLET

  • Covina, California, United States
  • Mar 3rd
30 ASSORTED 5C COLLETS w/ RACK - 1/16" to 1-1/16" - 29 w/ INTERNAL THREADS

30 ASSORTED 5C COLLETS w/ RACK - 1/16" to 1-1/16" - 29 w/ INTERNAL THREADS

  • Covina, California, United States
  • Mar 3rd
9 HARDINGE ASSORTED 5C COLLETS - 1/32" to 1-1/8"

9 HARDINGE ASSORTED 5C COLLETS - 1/32" to 1-1/8"

  • Covina, California, United States
  • Mar 3rd
5/8" Floating Locating Pins

5/8" Floating Locating Pins

  • Costa Mesa, California, United States
  • Mar 4th
3/8" Floating Locating Pins

3/8" Floating Locating Pins

  • Costa Mesa, California, United States
  • Mar 4th
5/16" Floating Locating Pins

5/16" Floating Locating Pins

  • Costa Mesa, California, United States
  • Mar 4th
Starrett Parallel clamps #161-E; Set of two

Starrett Parallel clamps #161-E; Set of two

  • Middletown, Virginia, United States
  • Mar 8th
De-Sta-Co DeStaCo 207-U Vertical Handle Hold Down Action Clamp Latch

De-Sta-Co DeStaCo 207-U Vertical Handle Hold Down Action Clamp Latch

  • Kissimmee, Florida, United States
  • Mar 8th
De-Sta-Co DeStaCo 207 Vertical Handle Hold Down Action Clamp Latch

De-Sta-Co DeStaCo 207 Vertical Handle Hold Down Action Clamp Latch

  • Kissimmee, Florida, United States
  • Mar 8th
Flotron Circuit Board Vise Swivel Base Panavise Style vise

Flotron Circuit Board Vise Swivel Base Panavise Style vise

  • Dallas, Texas, United States
  • Mar 8th
TOOLMAKER MACHINIST VISE 4.0x2 3/8x1 3/4 OPEN MAX 2.0

TOOLMAKER MACHINIST VISE 4.0x2 3/8x1 3/4 OPEN MAX 2.0

  • Los Angeles, California, United States
  • Mar 8th
Vintage Vulcan No.1 Chain Pipe Vise by J.H. Williams & Co, Made in Buffalo NY

Vintage Vulcan No.1 Chain Pipe Vise by J.H. Williams & Co, Made in Buffalo NY

  • Saranac, Michigan, United States
  • Mar 8th
BTC 6" 4 Jaw D1-3 Independent Lathe Chuck 2 PIECE JAWS REVERSIBLE

BTC 6" 4 Jaw D1-3 Independent Lathe Chuck 2 PIECE JAWS REVERSIBLE

  • Columbus, Ohio, United States
  • Mar 9th
Grizzly G9828 3-Inch 3-Jaw Plain Back Scrol Length Chuck

Grizzly G9828 3-Inch 3-Jaw Plain Back Scrol Length Chuck

  • United States
  • Mar 9th
8" Rough Backplate for Threaded Scroll Chuck - Bison Type 8205 - #7-870-108

8" Rough Backplate for Threaded Scroll Chuck - Bison Type 8205 - #7-870-108

  • Camarillo, California, United States
  • Mar 9th
Okuma No.5 Rolling Center (New In Box)

Okuma No.5 Rolling Center (New In Box)

  • Aurora, Indiana, United States
  • Apr 24th
Vintage new MT.no.1 Live Center Centers #1

Vintage new MT.no.1 Live Center Centers #1

  • Fort Worth, Texas, United States
  • Apr 24th
Grizzly Industrial MT2-1 Live Center - Machinist tools Lathe Milling

Grizzly Industrial MT2-1 Live Center - Machinist tools Lathe Milling

  • Boyertown, Pennsylvania, United States
  • Apr 24th
YUASA 8" HORIZONTAL / VERTICAL INDEXING SUPER SPACER w/ 8" 3-JAW CHUCK #550-007

YUASA 8" HORIZONTAL / VERTICAL INDEXING SUPER SPACER w/ 8" 3-JAW CHUCK #550-007

  • Covina, California, United States
  • May 30th
20" TROYKE HORIZONTAL/VERTICAL ROTARY TABLE

20" TROYKE HORIZONTAL/VERTICAL ROTARY TABLE

  • Lubbock, Texas, United States
  • May 30th
TSUDAKOMA 4/5 Axis Trunion Tilting DUAL ROTARY TABLE RT-244 w/ Cross Slide BASE

TSUDAKOMA 4/5 Axis Trunion Tilting DUAL ROTARY TABLE RT-244 w/ Cross Slide BASE

  • Grand Rapids, Michigan, United States
  • May 30th
Vintage MAGNETIC TRANSFER V-BLOCK No. V-438 by ANTON Brass GRINDING/CHUCK TOOL!

Vintage MAGNETIC TRANSFER V-BLOCK No. V-438 by ANTON Brass GRINDING/CHUCK TOOL!

  • Washington, New Jersey, United States
  • May 30th
NAAMS Standard NC Block ANL067 NMSS ANL-067

NAAMS Standard NC Block ANL067 NMSS ANL-067

  • Fraser, Michigan, United States
  • May 30th
NAAMS Standard ALB111M NMSS ALB-111M

NAAMS Standard ALB111M NMSS ALB-111M

  • Fraser, Michigan, United States
  • May 30th
Collet Nut Wrench for MultiCam HSK63 Tool Holders

Collet Nut Wrench for MultiCam HSK63 Tool Holders

  • Elk Grove Village, Illinois, United States
  • Jun 4th
Collet Nut Wrench for MultiCam HSK32 Tool Holders

Collet Nut Wrench for MultiCam HSK32 Tool Holders

  • Elk Grove Village, Illinois, United States
  • Jun 4th
21 Pc. Talon CAT 40 ER 32x2.75" 15K RPM CNC Collet Chuck Kit-3 Chucks,18 Collets

21 Pc. Talon CAT 40 ER 32x2.75" 15K RPM CNC Collet Chuck Kit-3 Chucks,18 Collets

  • Hamden, Connecticut, United States
  • Jun 4th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies